Aeroshell design techniques for aerocapture entry vehicles

A major goal of NASA's In-Space Propulsion Program is to shorten trip times for scientific planetary missions. To meet this challenge arrival speeds will increase, requiring significant braking for orbit insertion, and thus increased deceleration propellant mass that may exceed launch lift capabilities. A technology called aerocapture has been developed to expand the mission potential of exploratory probes destined for planets with suitable atmospheres. Aerocapture inserts a probe into planetary orbit via a single pass through the atmosphere using the probe's aeroshell drag to reduce velocity. The benefit of an aerocapture maneuver is a large reduction in propellant mass that may result in smaller, less costly missions and reduced mission cruise times. The methodology used to design rigid aerocapture aeroshells will be presented with an emphasis on a new systems tool under development. Current methods for fast, efficient evaluations of structural systems for exploratory vehicles to planets and moons within our solar system have been under development within NASA having limited success. Many systems tools that have been attempted applied structural mass estimation techniques based on historical data and curve fitting techniques that are difficult and cumbersome to apply to new vehicle concepts and missions. The resulting vehicle aeroshell mass may be incorrectly estimated or have high margins included to account for uncertainty. This new tool will reduce the guesswork previously found in conceptual aeroshell mass estimations.     

Advantages and disadvantages of prizes in a portfolio of financial incentives for space activities

The National Aeronautics and Space Administration (NASA) has proposed to use financial prizes to encourage innovation in space technology. Public debate about the use of prizes questions their effectiveness, the role of government compared with the private sector in administering prizes—for example, the Ansari X-Prize for human suborbital flight was privately funded and administered—and other issues that are likely to influence the success of this approach.     

n-Body problem: Selective effects of triple close approaches

In Celestial Mechanics the triple close approach is a highly unstable phenomenon that leads very often to the formation of a very small binary escaping with a large velocity in the direction opposite to the escape of the third body.That third escaping body is generally either the smallest mass or the second smallest and it implies a very selective effect in star clusters: the lightest stars are statistically the first to be ejected.     

Benefits to world agriculture through remote sensing

Remote sensing of agricultural land permits crop classification and mensuration which can lead to improved forecasts of production. This technique is particularly important for nations which do not already have an accurate agricultural reporting system. Better forecasts have important economic effects. International grain traders can make better decisions about when to store, buy and sell. Farmers can make better planting decisions by taking advantage of production estimates for areas out of phase with their own agricultural calendar. World economic benefits will accrue to both buyers and sellers because of increased food supply and price stabilization.

This paper reviews the econometric models used to establish this scenario and estimates the dollar value of benefits for world wheat as 200 million dollars annually for the United States and 300–400 million dollars anually for the rest of the world.     

Flow of a water jet into vacuum

At certain intervals excess water has to be dumped into space overboard of the Spacelab cabin. For the development of a useful nozzle the behaviour of a water jet flowing into vacuum was investigated experimentally and theoretical interpretations of the flow phenomena which were found are given. The influence of parameters like the shape of the nozzle, the temperature and the gas content of water were studied. At certain test conditions, the jet leaves the nozzle exit in bundled form and ends abruptly bursting into droplets and ice-particles. The “bursting”-mechanism is explained by a sudden boiling of the water in the jet causing the growth of vapor bubbles decomposing the jet. The formation of vapor bubbles is initiated by a superheating of the water of the jet caused by a sudden pressure drop and a cooling at the surface of the jet. The expansion of vapor bubbles in the jet is retarded by surface tension forces which results in a relaxation time for the bursting of the jet. The vapor flow in radial directions of the jet is approximately described by a plane radial source flow. The measurement of the pitot-pressure radially to the jet proves that the vapor flow is supersonic.     

Interaction onde de choc-couche limite laminaire sur un corps de revolution en rotation

(Shock Wave-Laminar Boundary Layer Interaction on a Spinning Axisymmetric Body)—A method is developed to predict the shock wave-laminar boundary layer interaction on an axisymmetric body spinning in axial flow. The integral scheme of Lees, Reeves and Klineberg is used. The Falkner Skan “type” equations is then established for the boundary layer on spinning cylinder and used to construct the polynomial representation of the integral quantities. The independence of the polynomials with respect to the spinning rate is demonstrated. A cylinder of 200 mm diameter with a flare is built and tested up to 5000 rmp in wind tunnel at M = 2.21. The pressure measurements are in good agreement with the theoretical results. The rotation induces the decreasing of the pressure level and boundary layer separation inside the interaction region.     

二硝酰胺铵(ADN)球形化工艺研究

介绍了近年来国外关于二硝酰胺铵（ADN）球形化的工艺方法，重点讨论了中间介质、分散剂、表面活性剂和热稳定剂的作用及其选择方法。     

Vibration and pulsation processes in feed systems of liquid rocket engines

Pulsation and vibration process in high speed centrifugal pumps and feed lines were investigated. Linear and quadratic relations between pulsation parameters and main factors were obtained. The investigation of turbopump low frequency oscillations showed that the intensity of pulsations is proportional to the pump specific linear size. Linear mathematic models with lumped parameters fairly well demonstrate the vibration influence on low frequency flow pressure vibrations in pumps and feed lines. It is shown that, in some conditions, the pressure oscillation amplitude distribution by the vibrating feed lines length may be characterized by the presence of a node in an intermediate section. A one-dimensional mathematic model based on wave equations proved to be suitable for calculations of vibration and pulsation parameters within a wide frequency range.     

燃气蒸汽式发射系统内弹道若干问题研究

通过对燃气蒸汽式发射动力系统的研究，总结出影响内弹道计算精度的若干因素，并就其中几个影响较大的问题进行了详细的分析，开发研制出了一套用于预估内弹道性能的系统化程序。通过实验数据的比较，验证了适用于内弹道计算的数学物理模型，为燃气蒸汽式发射系统设计提供参考依据。     

The cost benefits of the Spacelab system to scientific investigations and space applications

In the past, one of the major problems in performing scientific investigations in space has been the high cost of developing, integrating, and transporting scientific experiments into space. The limited resources of unmanned spacecraft, coupled with the requirements for completely automated operations, was another factor contributing to the high costs of scientific research in space. In previous space missions after developing, integrating and transporting costly experiments into space and obtaining successful data, the experiment facility and spacecraft have been lost forever, because they could not be returned to earth. The objective of this paper is to present how the utilization of the Spacelab System will result in cost benefits to the scientific community, and significantly reduce the cost of space operations from previous space programs.The following approach was used to quantify the cost benefits of using the Spacelab System to greatly reduce the operational costs of scientific research in space. An analysis was made of the series of activities required to combine individual scientific experiments into an integrated payload that is compatible with the Space Transportation System (STS). These activities, including Shuttle and Spacelab integration, communications and data processing, launch support requirements, and flight operations were analyzed to indicate how this new space system, when compared with previous space systems, will reduce the cost of space research. It will be shown that utilization of the Spacelab modular design, standard payload interfaces, optional Mission Dependent Equipment (MDE), and standard services, such as the Experiment Computer Operating System (ECOS), allow the user many more services than previous programs, at significantly lower costs. In addition, the missions will also be analyzed to relate their cost benefit contributions to space scientific research.The analytical tools that are being developed at MSFC in the form of computer programs that can rapidly analyze experiment to Spacelab interfaces will be discussed to show how these tools allow the Spacelab integrator to economically establish the payload compatibility of a Spacelab mission.The information used in this paper has been assimilated from the actual experience gained in integrating over 50 highly complex, scientific experiments that will fly on the Spacelab first and second missions. In addition, this paper described the work being done at the Marshall Space Flight Center (MSFC) to define the analytical integration tools and techniques required to economically and efficiently integrate a wide variety of Spacelab payloads and missions. The conclusions reached in this study are based on the actual experience gained at MSFC in its roles of Spacelab integration and mission managers for the first three Spacelab missions. The results of this paper will clearly show that the cost benefits of the Spacelab system will greatly reduce the costs and increase the opportunities for scientific investigation from space.