Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

(100)/(111)面金刚石膜抗氧等离子刻蚀能力

使用微波等离子体技术(microwave plasma chemical vapor deposition,MPCVD)对膜厚100μm的(100)和(111)晶面金刚石膜进行刻蚀处理,研究其抗氧等离子体的行为。结果表明:(100)晶面刻蚀首先发生在晶棱晶界处,而(111)晶面金刚石的刻蚀首先发生在晶面处;30 min刻蚀后,(100)面金刚石有明显晶面显现,(111)面金刚石膜晶面不明显;60 min刻蚀后,(100)和(111)晶面金刚石膜的择优取向消失;(100)晶面金刚石特征峰的半高宽值(full width at the half maximum,FWHM)由刻蚀前的8.51 cm^–1上升至刻蚀后的12.48 cm^–1,(111)晶面金刚石FWHM值由8.74 cm^–1上升至148.49 cm^–1;(100)晶面金刚石膜刻蚀速率在40 min时为0.35μm/min,60 min时上升至1.34μm/min;刻蚀前期,(100)晶面金刚石膜具有更好的抗氧等离子体刻蚀能力,刻蚀后期其抗刻蚀能力与(111)晶面金刚石膜相似。     

稳态等离子体推进器羽流场数值模拟

采用二维轴对称模型,使用粒子网格法(PIC)和直接模拟蒙特卡洛法(DSMC)相结合的方法,对稳态等离子体推进器(SPT)羽流场进行了数值模拟.采用DSMC方法中的随机取样频率法(RSF)求解粒子碰撞过程,并对比了不同的分配电荷方式、电子运动模型及SPT出口条件时的羽流场.将不同条件计算得到的羽流场中距SPT出口0.1?m,0.5?m及1.0?m处的离子电流密度和电荷密度与实验结果进行了对比,得出在采用面积权重法分配电荷、等熵模型描述电子运动和用实验值设定发动机出口参数时对SPT羽流场数值模拟的电流密度和轴向附近的电荷密度结果与实验结果符合程度较好的结论.     

太阳中纬度探测共振借力轨道设计

针对太阳中纬度探测任务,设计了共振借力轨道方案.根据离开超越速度的解析表达式得到借力后日心轨道的可行集并将结论推广到任意借力行星.进而提出RRpInc图形化设计方法,通过RRpInc图分析得到共振借力的超越速度大小直接决定了最终轨道倾角.以共振借力行星作为目标星体设计借力转移轨道,以逃逸速度和到达超速作为性能指标,采用多目标优化算法优化.给出了两个设计方案:方案1选择金星作为共振借力行星,探测器通过"金星-地球-地球"借力飞行增加金星共振借力前的超越速度;方案2选择地球为共振借力行星,探测器在木星借力后返回地球共振借力.两个方案最终轨道倾角分别约为30°和35°.     

Estimation of ballistic coefficients of low altitude debris objects from historical two line elements

This paper presents a new method for estimating ballistic coefficients (BCs) of low perigee debris objects from their historical two line elements (TLEs). The method uses the drag perturbation equation of the semi-major axis of the orbit. For an object with perigee altitude below 700 km, the variation in the mean semi-major axis derived from the TLE is mainly caused by the atmospheric drag effect, and therefore is used as the source in the estimation of the ballistic coefficient. The method is tested using the GRACE satellites, and a number of debris objects with external ballistic coefficient values, and agreements of about 10% are achieved.     

萤火一号火星探测器轨道设计与科学探测事件分析

针对萤火一号火星探测器在2011年发射窗口的轨道进行初步设计.在此基础上,分析了萤火一号火星探测器绕火星飞行的轨道特性,预报其穿越火星弓激波和磁堆积区域、CCD相机拍照时刻,其与深空站进行星-地掩星试验和与俄罗斯Phobos-Grunt火星探测器进行星-星掩星试验的时刻.结果表明,萤火一号火星探测器在与俄罗斯Phobos-Grunt分离后一年的环火飞行时间里,存在大量的科学探测机会.     

太阳帆航天器行星际轨道转移优化算法

研究基于遗传算法的太阳帆行星际转移轨道的全局优化问题.通过极小值原理推导了太阳帆全局优化控制律,并以太阳帆飞行时间最短为优化目标函数,运用遗传算法对发射时间、到达时间和协态变量初值进行参数优化设计.为了解决轨道转移这一多约束优化问题,在遗传算法中加入动态罚函数.在此理论基础上作了从地球同步轨道出发到火星同步轨道转移和从地球出发与火星交会两个算例,仿真结果表明了该方法在太阳帆转移轨道全局优化中的有效性.     

中俄联合火星电离层星-星掩星探测

中俄联合火星星-星掩星探测是人类首次在火星空间环境进行此类的联合试验。用于探测火星电离层的星-星掩星技术较以前星地间的探测技术相比,有可接收高信噪比信号,反演精度高,可探测火星上太阳天顶角大于43°,或者小于138°的区域电离层等优点。本文介绍了中俄联合火星星-星掩星探测方案、基本原理,给出了主要技术指标、地面模拟测试结果。     

电连接器接点焊接工艺研究

针对航天产品电连接器接点焊点与引线断裂失效问题,分析了焊接过程中助焊剂、焊料、焊接工具和防护套等对接点焊接质量的影响。结合实践经验,提出相关工作参数和材料的选取原则,确定了生产中焊接技术的质量控制点。     

Numerical Study of Parachute-Payload Land Site Distribution with Randomize Wind Gust Model

A parachute-payload model with randomize wind gust is developed to study the landing accuracy of the parachute decelerator system,which can be exactly described by the landing site distribution.The research focuses on the steady descent phase of the parachute descent process,so the parachute and the payload suspension formulation during the phase are mainly discussed.In addition,since the wind effects have a significant impact on the land site distribution of the passive decelerator system and it is difficult to obtain the exact wind profile in practice,major features of parachute-payload system are studied via the randomized wind gust formulation.As the randomized wind gust formulation is adopted,the wind effect can be considered without the exact wind gust profile and the parachute aerodynamic simulation can be fulfilled with uncertainties.Finally,the model is validated and discussed,and the parachute land site distributions with different wind randomize profiles are presented for comparison.The results show that when parachute is less stable,the land site tends to have a larger variance.