Instrument Boom Mechanisms on the THEMIS Satellites; Magnetometer, Radial Wire, and Axial Booms

The five “Time History of Events and Macroscale Interactions during Substorms” (THEMIS) micro-satellites launched on a common carrier by a Delta II, 7925 heavy, on February 17, 2007. This is the fifth launch in the NASA MeDIum class EXplorer (MIDEX) program. In the mission proposal the decision was made to have the University of California Berkeley Space Sciences Laboratory (UCB-SSL) mechanical engineering staff provide all of the spacecraft appendages, in order to meet the short development schedule, and to insure compatibility. This paper describes the systems engineering, design, development, testing, and on-orbit deployment of these boom systems that include: the 1 and 2 meter carbon fiber composite magnetometer booms, the 40 and 50 m tip to tip orthogonal spin-plane wire boom pairs, and the 6.3 m dipole stiff axial booms.     

Silicifying biofilm exopolymers on a hot-spring microstromatolite: templating nanometer-thick laminae

Exopolymeric substances (EPS) are an integral component of microbial biofilms; however, few studies have addressed their silicification and preservation in hot-spring deposits. Through comparative analyses with the use of a range of microscopy techniques, we identified abundant EPS significant to the textural development of spicular, microstromatolitic, siliceous sinter at Champagne Pool, Waiotapu, New Zealand. Examination of biofilms coating sinter surfaces by confocal laser scanning microscopy (CLSM), environmental scanning electron microscopy (ESEM), cryo-scanning electron microscopy (cryo-SEM), and transmission electron microscopy (TEM) revealed contraction of the gelatinous EPS matrix into films (approximately 10 nm thick) or fibrillar structures, which is common in conventional SEM analyses and analogous to products of naturally occurring desiccation. Silicification of fibrillar EPS contributed to the formation of filamentous sinter. Matrix surfaces or dehydrated films templated sinter laminae (nanometers to microns thick) that, in places, preserved fenestral voids beneath. Laminae of similar thickness are, in general, common to spicular geyserites. This is the first report to demonstrate EPS templation of siliceous stromatolite laminae. Considering the ubiquity of biofilms on surfaces in hot-spring environments, EPS silicification studies are likely to be important to a better understanding of the origins of laminae in other modern and ancient stromatolitic sinters, and EPS potentially may serve as biosignatures in extraterrestrial rocks.     

A nonlinear helicopter tracker using attitude measurements

Extended-Kalman-filter-based trackers are discussed for maneuvering helicopters that use body angle and rotor tip-path-plane angle measurements in addition to the usual radar position measurements. Improvements were found in tracker performance when the body rotation and rotor tip-path-plane degrees of freedom were modeled within the extended Kalman filter. Tracker performance was further improved when measurements of body angles and rotor tip-path-plane angles were made available to the tracker     

横侧静稳定性的一种分析方法

通过对迎角、侧滑角、后掠角等概念的几何意义进行确认,从几何上确定了各迎角间的关系,在不改变几何意义的基础上对有侧滑和无侧滑时的迎角关系式进行近似处理,并运用目前通行的方法推导了由侧滑导致的后掠翼飞机的滚转力矩公式,对后掠翼飞机横侧静稳定性的分析提出一种较准确的方法。这个方法几何意义明确,采用类比的方法后,避免了复杂的几何证明,因而公式的推导过程也比较简捷。 由于对基本概念的认识不同和近似处理的方法不同,所得滚转力矩的变化规律也是不同的。但在精度不高的情况下,各种方法所得的简化结果则相同。     

A new weighted mean temperature model in China

The Global Positioning System (GPS) has been applied in meteorology to monitor the change of Precipitable Water Vapor (PWV) in atmosphere, transformed from Zenith Wet Delay (ZWD). A key factor in converting the ZWD into the PWV is the weighted mean temperature ($T_m$), which has a direct impact on the accuracy of the transformation. A number of Bevis-type models, like $T_m-T_s$ and $T_m-T_s\text{,}{P}_s$ type models, have been developed by statistics approaches, and are not able to clearly depict the relationship between $T_m$ and the surface temperature, $T_s$. A new model for $T_m$, called weighted mean temperature norm model (abbreviated as norm model), is derived as a function of $T_s$, the lapse rate of temperature, δ, the tropopause height, $h_{\mathit{trop}}$, and the radiosonde station height, $h_s$. It is found that $T_m$ is better related to $T_s$ through an intermediate temperature. The small effects of lapse rate can be ignored and the tropopause height be obtained from an empirical model. Then the norm model is reduced to a simplified form, which causes fewer loss of accuracy and needs two inputs, $T_s$ and $h_s$. In site-specific fittings, the norm model performs much better, with RMS values reduced averagely by 0.45 K and the Mean of Absolute Differences (MAD) values by 0.2 K. The norm model is also found more appropriate than the linear models to fit $T_m$ in a large area, not only with the RMS value reduced from 4.3 K to 3.80 K, correlation coefficient $R^2$ increased from 0.84 to 0.88, and MAD decreased from 3.24 K to 2.90 K, but also with the distribution of simplified model values to be more reasonable. The RMS and MAD values of the differences between reference and computed PWVs are reduced by on average 16.3% and 14.27%, respectively, when using the new norm models instead of the linear model.     

空间用9Cr18 钢PIII 复合离子注入表面改性工艺研究

采用等离子体浸没离子注人(PⅢ)技术对9Cr18轴承钢表面进行了双注入及共注入Ti+N工艺处理.测试了处理前后试样的显微硬度及真空摩擦因数,并表征分析了表面磨损形貌.结果表明:处理后试样的显微硬度都有大幅提高,最大增幅达68.7％；表面真空摩擦因数由0.15下降到0.08；磨斑尺寸及粗糙度分别减少了54.4％和37.4％.双注入与共注入方式在相同参数下,双注入处理后的试样表面综合性能更加优异.