使用混合执行机构的快速机动卫星力矩分配算法

针对单框架控制力矩陀螺群（SGCMGs）存在奇异和单框架控制力矩陀螺（SGCMG）存在框架转速死区的问题,研究了SGCMG与飞轮联合作为执行机构的控制力矩分配算法,以SGCMG功耗、飞轮功耗和飞轮角动量的二次型加权矩阵求和为性能指标,提出了一种形式简洁的混合执行机构力矩分配算法,通过分析,证明该分配算法能够有效的避免SGCMGs的奇异;设计了一种SGCMG功耗加权矩阵的调节策略,解决了SGCMG陷入转速死区的问题,设计了一种飞轮角动量加权矩阵的调节策略,通过对加权矩阵的实时调节实现了对飞轮角动量的管理,解决了飞轮转速的饱和与过零问题。数学仿真结果验证了该力矩分配算法的有效性。     

节点外啮合齿轮胶合承载能力中平均摩擦因数的计算方法

分析了现有胶合承载能力计算中平均摩擦因数计算方法的不足之处,根据节点外啮合齿轮传动的啮合特点,以相关标准中渐开线圆柱齿轮的计算公式为基础,提出了一种更为合理且精度较高的平均摩擦因数计算方法,以满足节点外啮合齿轮胶合承载能力计算的需要.通过对内、外啮合副节点前啮合和节点后啮合实例的计算,得出除外啮合节点前啮合以外,利用标准计算得到的平均摩擦因数的误差都超过18.5%,而改进计算方法所得的误差都在6.5%之内,证实了这种改进的平均摩擦因数计算方法具有更高的精度,而且这一计算方法也适用于标准齿轮传动.      

Gyrosynchrotron Radiation of Interplanetary CMEs

CMEs (Coronal Mass Ejections) are an important means of energy release in the solar corona. Solar Polar Orbit Radio Telescope (SPORT) is a mission being proposed for observing the propagation of interplanetary CMEs from solar polar orbit. The main payload onboard SPORT is a synthetic aperture interferometric radiometer, which receives radio emission of interplanetary CMEs. It is identified that there are mainly three radio emission mechanisms of CMEs, i.e., bremsstrahlung, gyrosynchrotron emission and plasma emission. Among these emission types, bremsstrahlung emission is the main emission mechanism of the high-density plasma clouds of interplanetary CMEs. Gyrosynchrotron emission is the continuous emission generated by high-energy electrons from CMEs, while plasma emission is the main mechanism of transient radio bursts from CMEs. In this paper, the gyrosynchrotron emission of interplanetary CMEs is focused on. Firstly, the mechanism of gyrosynchrotron emission is reviewed. Secondly, a review of the physical parameter models of background solar wind and interplanetary CMEs is presented. After these, the brightness temperature and polarization of gyrosynchrotron emission of interplanetary CMEs are calculated and analyzed. Finally, the detectability of gyrosynchrotron emission of interplanetary CMEs by radio meters is discussed briefly.      

2D雷达与3D雷达航迹关联问题研究

对2D雷达与3D雷达的航迹关联问题进行了研究,提出了两种通过升维来达到航迹关联的算法,解决了2D雷达与3D雷达同地、异地配置的关联问题。通过典型环境下的仿真,体现了算法较好的关联性能和较强的鲁棒性。     

海上漂浮平台的漂浮规律

通过分析水中质点的运动规律,简化其运动方程,进而研究某武器系统的漂浮平台摇摆规律,计算其在一定海情下的最大摇摆角幅度、角速度及角加速度,为后续研究漂浮平台的运动打下一定理论基础。     

Flow Stability Model for Fan/Compressors with Annular Duct and Novel Casing Treatment

A three-dimensional compressible flow stability model is presented in this paper, which focuses on stall inception of multi-stage axial flow compressors with a finite large radius annular duct configuration for the first time. It is shown that under some assumptions, the stability equation can be obtained yielding from a group of homogeneous equations. The stability can be judged by the non-dimensional imaginary part of the resultant complex frequency eigenvalue. Further more, based on the analysis of the unsteady phenomenon caused by casing treatment, the function of casing treatment has been modeled by a wall impedance condition which is included in the stability model through the eigenvalues and the corresponding eigenfunctions of the system. Finally, some experimental investigation and two numerical evaluation cases are conducted to validate this model and emphasis is placed on numerically studying the sensitivity of the setup of different boundary conditions on the stall inception of axial flow fan/compressors. A novel casing treatment which consists of a backchamber and a perforated plate is suggested, and it is noted that the open area ratio of the casing treatment is less than 10%, and is far smaller than conventional casing treatment with open area ratio of over 50%, which could result in stall margin improvement without obvious efficiency loss of fan/compressors.     

5kN再生冷却发动机推力室传热研究

5 kN摇摆发动机推力室采用再生冷却身部,为检验推力室冷却方案设计的合理性,对5 kN再生冷却发动机推力室进行传热计算,分析了再生冷却的影响因素,并针对发动机设计提出了相应的改进措施,改进后的发动机热试车工作正常,表明了改进工作的有效性。     

基于AHP的航空装备技术保障质量影响因素分析

围绕航空装备技术保障质量控制,深入分析了航空装备技术保障质量控制的内涵,构建了航空装备技术保障质量控制过程模型,阐述了影响航空装备技术保障质量的各种因素,并在调研和统计分析的基础上,应用层次分析法给出了影口向航空装备技术保障质量的因果图。     

机载高速相机图像准实时下传方法

针对利用遥测信道准实时传输机载大面阵高速相机图像问题进行了研究,设计了一套大面阵高速相机图像准实时下传系统,分析了图像数据下传的实时性.该系统在记录高速相机原始图像的同时,可对图像进行抽帧、缩小画幅、压缩处理,并实时下传到地面用于监视.分析表明,该系统能在靶场试验结束后几分钟内,将关键时间段的原始图像逐帧下传到地面,实...     

膏体推进剂冲压发动机一次燃烧试验

针对额定流量和流量调节条件下膏体冲压发动机一次燃烧组织稳定的要求,提出了一种燃面自适应燃烧组织模式,设计了一次燃烧组织试验系统,进行了一次燃烧组织试验。试验结果表明,推进剂输送稳定,点火时序和推进剂输送时机合理,防回火措施有效,燃烧室压强经过调整后能够稳定在设计值附近。燃面自适应燃烧组织模式可以实现燃面的自适应调节,使推进剂输送和燃烧保持平衡,保证发动机的一次燃烧稳定。