激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

固体火箭发动机地面性能换算成真空性能研究

根据固体火箭发动机内弹道计算模型，分析了使用大扩张比喷管地面静止试验性能与真空性能之间的联系，建立了由地面性能换算成真空性能的方法，计算出的真空推力、真空比冲等数据与实际相符。     

IEEE488总线在动量轮测试中的应用

叙述了资源卫星动量轮的一般结构和开环测试原理。详细介绍了应用ＩＥＥＥ４８８总线构成的动量轮开环性能自动测试系统。说明了这个自动测试系统的系统构成以及测试项目、测试流程和获得的测试结果。并据此提出这个系统在卫星研制工作中具有推广价值。     

太阳宁静及耀斑期间1AU附近等离子体轫致辐射研究

在太空等离子体中，尤其在等离子体内部磁场较弱时，轫致辐射是等离子体能量损失的主要机制．本文对太阳宁静及耀斑期间1AU处等离子体轫致辐射计算表明，等离子体辐射强度If的变化与辐射的电磁波频率有直接的关系．当辐射频率，接近于等离子体频率，fpe时，辐射强度显著增大．随着电磁波辐射频率的增大，辐射强度随频率增大作缓慢对数下降．辐射亮温Tb与等离子体电子温度Te、介质光深成正比．Tb与If随辐射频率变化的整体趋势一致．在相同的辐射频率情况下，太阳宁静期间If值、Tb值低于太阳耀斑期间If值、Tb值．     

NUMERICAL MODELLING OF VELOCITY AND TEMPERATURE DISTRIBUTIONS OF THE BUOYANCY CONVECTION EFFECT IN KNbO3 MELT

Numerical modelling of velocity and temperature fields in high-temperature KNbO3 melt of a loop-shaped Pt wire heater is carried out by using the commercial com putational code ANSYS for the mathematical solution of the governing equations.Based on the experimental boundary conditions and the Boussinesq approximation,the numerical modelling of a steady and two-dimensional model is applied to study the process under consideration of the buoyancy-driven convection condition. The result is compared with the previous experimental and theoretical data obtained in our laboratory, and the former is in agreement with the latter. Thus a theoretical guide for reasonable growth conditions is provided by studying in depth the real fluid flow effects in the crystal growth from the melt.     

定常对称背涡流态下细长体绕流结构的演变

应用数值计算的方法模拟了细长体截面绕流结构的演变过程.指出随着细长体背涡的发展,导致截面流场的拓扑结构发生变化,会出现一种临界流动状态.并用微分方程的定性理论分析了此时流场中出现的一种高阶奇点.这种高阶奇点的指数为-3/2,它是结构不稳定的,稍有扰动就会产生分叉,使流场的拓扑结构发生变化.得出了定常对称背涡流态下细长体的空间绕流结构图.     

基于VB6．0数据库下的示波器自动检定系统实现

以9500示波器自动检定系统为例,介绍了在VB6.0开发环境下,引用其强大的数据库功能。通过建立9500程控代码数据库、仪器登记数据库、检定参数设置信息库、检定结果信息库,实现了各库之间的数据访问和存储,达到了对各种示波器的半自动和全自动检定。并将部分代码加以介绍,可以直接在其它自动测试中应用,因此具有广泛的应用和借鉴价值。     

电子吊舱环境控制系统设计的新技术

针对我国军用电子设备吊舱载机电源紧张,国产电子元器件耐温性能相对较差,对环境控制系统要求较高的特点,本文提出了一种新型用冲压空气驱动的环境控制系统.该系统采用"蓄冷节能"的设计思想和逆升压回冷技术,并配备具有智能功能的测控子系统.为克服冲压空气压头低的困难,利用空气动力学理论,提高进气道总压恢复系数,扩大系统进出口压差,从而获得较大涡轮膨胀比.试验结果证明所设计的吊舱环控系统具有良好的制冷性能和经济性.