浅谈形式公正、实质公正与消除信息不对称对于工程监理的重要作用

分析了形式公正、实质公正与消除信息不对称在建设工程监理中的重要作用,对它们三者之间的辩证逻辑关系进行了分析,提出若干政策建议和解决办法.     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Predictive Modeling and Parameter Optimization of Cutting Forces During Orbital Drilling

To optimize cutting control parameters and provide scientific evidence for controlling cutting forces,cutting force modeling and cutting control parameter optimization are researched with one tool adopted to orbital drill holes in aluminum alloy 6061.Firstly,four cutting control parameters(tool rotation speed,tool revolution speed,axial feeding pitch and tool revolution radius)and affecting cutting forces are identified after orbital drilling kinematics analysis.Secondly,hybrid level orthogonal experiment method is utilized in modeling experiment.By nonlinear regression analysis,two quadratic prediction models for axial and radial forces are established,where the above four control parameters are used as input variables.Then,model accuracy and cutting control parameters are analyzed.Upon axial and radial forces models,two optimal combinations of cutting control parameters are obtained for processing a13mm hole,corresponding to the minimum axial force and the radial force respectively.Finally,each optimal combination is applied in verification experiment.The verification experiment results of cutting force are in good agreement with prediction model,which confirms accracy of the research method in practical production.     

安徽省生产性服务业和制造业融合发展研究

产业融合是现代产业发展的必然结果,利用2002-2007年安徽省投入产出表相关数据,结合中间投入率和中间需求率,对安徽省生产性服务业和制造业间的融合度进行测算,探究安徽省产业融合特点和规律,旨在为安徽省产业结构调整和转型升级提供科学依据。研究表明:整体制造业和生产性服务业相互依赖,融合程度在不断加深,生产性服务业的投入主要集中在劳动和资源密集型产业,对技术密集型产业的投入较低,不同生产性服务业对整体制造业的投入结构存在明显差异。     

清代丛书汇辑小学著作论略

清代小学研究发达,丛书收录小学著作的数量非常可观。综合性丛书收录小学著作,自《四库全书》以后,较明代有了较大发展。专科丛书在《说文》学著作和音韵学著作的汇辑上最为突出。此外,由于清代辑佚学的兴盛,辑佚类丛书中收录小学著作的数量也比较多。清代丛书汇集小学著作,对清代以来的语言学及语言学史研究,是重要的文献基础,具有很高的学术价值。     

Efficiency optimized fuel supply strategy of aircraft engine based on air-fuel ratio control

Accurate fuel injection control of aircraft engine can optimize the energy efficiency of UAV power system while meeting the propeller speed requirement. Traditional injection control method such as open-loop calibration causes instability of fuel supply which brings the risk of power loss of UAV. Considering that the closed-loop control of AFR can ensure a stable fuel feeding, this paper proposes an AFR control based fuel supply strategy in order to improve the efficiency of fuel-powered UAV while obtaining the required engine speed. According to the optimum fuel injection results, we implement fuzzy-PID method to control the set AFR in different situations. Through simulation and experiment studies, the results indicate that, to begin with, the calibrated mathematical model of the aircraft engine is effective. Next, this fuel supply strategy based on AFR control can normally realize the engine speed regulation, and the applied control algorithm can eliminate the overshoot of AFR throughout all the working progress. What is more,the fuel supply strategy can averagely shorten the response time of the engine speed by about two seconds. In addition, compared with the open-loop calibration, in this work the power efficiency is improved by 9% to 33%. Last but not the least, the endurance can be improved by 30 min with a normal engine speed. This paper can be a reference for the optimization of UAV aircraft engine.     

舰载倾转旋翼机着舰域耦合流场数值模拟研究

倾转旋翼机是当前旋翼飞行器研究的热点,但有关舰载倾转旋翼机着舰域耦合流场的研究还很少。以两栖攻击舰(LHA)和V-22"鱼鹰"倾转旋翼机为研究对象,基于雷诺平均Navier-Stokes(RANS)方程和SST k-ω湍流模型对舰载倾转旋翼机着舰域耦合流场进行数值模拟研究,并探讨了不同着舰高度时机/舰耦合流场的相互作用。结果表明:倾转旋翼尾流会与舰船脱落涡、甲板舷涡以及舰岛艉涡发生较强的"涡-涡干扰"现象,加大了耦合流场的湍流强度;舰船流场的低频非稳态特征会导致旋翼桨盘气动载荷发生显著的波动,不利于飞行操纵;垂直降落过程中,舰船甲板会形成"前低后高"的压力分布特征,倾转旋翼RMS气动载荷值也会明显增加,降低了着舰安全性,且右旋翼RMS气动载荷值比左旋翼平均大一倍以上,这也表明右旋翼面临着更加严峻的气动环境。     

Command filtered sliding mode trajectory tracking control for unmanned airships based on RBFNN approximation

This paper presents two sliding mode controllers to address the trajectory tracking problem of unmanned airships in the presence of unknown wind disturbance. The sliding mode controller proposed first is designed by a fast power rate reaching law(FPRRL). The disturbance is compensated by a radial basis function neural network (RBFNN). To avoid the aggressive adaptation, the controller is augmented by a command filter. The controller provides good robustness and tracking performance with no chattering under the hypothesis of ideal wind field. However, serious chattering occurs when simulation is performed under discontinuous wind field. To simulate the wind in practice, the wind field employed in the simulation is generated by the combination of a constant field and white noise. The controller is improved subsequently with an extended model to suppress the chattering induced by the white noise. The enhanced controller manipulates the derivation of system input, thus attenuating the chattering. Stability analysis shows that both controllers drive the tracking error into a controllable small region near zero. Simulations are provided to validate the performance of the proposed controllers under different wind hypothesis.     

碳纤维复合材料结构损伤的自检方法研究进展

监测碳纤维增强树脂基复合材料(CFRP)的结构损伤是一个关键问题。本文就目前国内外研究较热且应用前景较大的一类新型无损检测技术——基于CFRP导电网络的自检技术进行综述,总结了直流法和交流法的原理和技术特点,尤其是对各种检测方法适用的环境和损伤类型进行了评估。最后指出了发展出一套智能化的CFRP结构损伤自检体系所要进一步开展的研究工作。