高超声速边界层转捩机理及应用的若干进展回顾

高超声速边界层转捩对飞行器的热传递、表面摩阻和流动分离等有重要影响,尤其是再入飞行器和吸气式巡航飞行器。然而,人们对边界层转捩机理中的很多问题认识还不清楚,或存在争议。本文从扰动波演化的角度回顾了高超声速边界层感受性、线性稳定性和非线性作用的国内若干研究进展,并以基于谐波共振的人工转捩技术为例示范了这些机理认识在转捩控制上的应用。扰动的产生和发展是认识边界层转捩机理的核心。通过研究扰动波来认识边界层转捩机理,开展应用创新研究对提升飞行器性能具有重要意义。     

A distributed approach for lidar-based relative state estimation of multi-UAV in GPS-denied environments

In this paper, we present a distributed framework for the lidar-based relative state estimator which achieves highly accurate, real-time trajectory estimation of multiple Unmanned Aerial Vehicles(UAVs) in GPS-denied environments. The system builds atop a factor graph, and only onboard sensors and computing power are utilized. Benefiting from the keyframe strategy, each UAV performs relative state estimation individually and broadcasts very partial information without exchanging raw data. The com...     

机械蝴蝶模型悬停飞行的流动显示实验

为了探索蝴蝶独特的外形及运动模式下蕴含的流动机理,与以往只考虑翅膀气动影响的拍动翼实验不同,我们开发了一种同时考虑身体及翅膀的机械系统用以模拟蝴蝶的悬停飞行,并采用染色液流动显示的方法对升力的主要来源——前缘涡进行了细致的观测。结果显示,在蝴蝶飞行的上下拍动过程中均有前缘涡产生,且不是以往观测到的螺旋或锥状结构,而是近似等直径的柱状联通形式,其明显特征为：在拍动加速阶段存在明显的展向流动,而在减速阶段则会出现破裂;另外,蝴蝶看似杂乱无章的运动实际上是一种自适应控制的结果,有助于提高升力。     

SPH方法对气液两相流自由界面运动的追踪模拟

气液两相流动是自然界中常见的流动现象,对其进行数值模拟时要求必须能够准确跟踪界面运动变形。本文利用光滑粒子流体动力学方法,结合微可压缩模型(SCM),引入界面控制方法XSPH速度修正以及Van Derwaals状态方程修正,对典型的气液两相流动如二维溃坝、气泡上浮等问题进行了数值模拟,分析了空气和水相互作用机理以及界面运动规律,并同实验结果和其他数值计算结果进行了比较。结果表明,该方法在模拟多相介质界面运动问题准确有效,可用于处理更为复杂的多相流动工程问题。     

减速器振动信号的经验模态分解

时域同步平均是直升机减速器诊断技术的基础,目前这种方法依赖于转速传感器提供相位同步信号。探讨了应用经验模态分解代替时域同步平均分析减速器振动信号的方法。构建了一个减速器振动信号模型,提取了故障特征信号。对经验模态分解过程进行了理论推导,证明经验模态分解可以分离出故障特征信号,给出了信号分离的充分条件。将这种方法应用于直升机减速器的两种故障(点蚀和裂纹)振动数据,结果表明经验模态分解正确地分离出了故障特征信号,信号特征更为显著。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

Aerodynamic optimization design of general parameters for cycloidal propeller in hover based on surrogate model

A surrogate-model-based aerodynamic optimization design method for cycloidal propeller in hover was proposed, in order to improve its aerodynamic efficiency, and analyze the basic criteria for its aerodynamic optimization design. The reliability and applicability of overset mesh method were verified. An optimization method based on Kriging surrogate model was proposed to optimize the geometric parameters for cycloidal propeller in hover with the use of genetic algorithm. The optimization results showed that the thrust coefficient was increased by 3.56%, the torque coefficient reduced by 12.05%, and the figure of merit (FM) increased by 19.93%. The optimization results verified the feasibility of this design idea. Although the optimization was only carried out at a single rotation speed, the aerodynamic efficiency was also significantly improved over a wide range of rotation speeds. The optimal configuration characteristics for micro and small-sized cycloidal propeller were: solidity of 0.2-0.22, maximum pitch angle of 25°-35°, pitch axis locating at 35%-45% of the blade chord length.      

退化量有缺失的无失效小样本轴承可靠性评估

针对有试验性能退化量参数记录、且(或)有部分数据缺失情况的小样本无失效轴承试验问题,通过由Taylor和Thompson提出的数据模拟法实现补全样本退化量,结合Bootstrap自助法扩大样本量,再根据基于性能退化轨迹的补充信息方法来进行其可靠性评估。选取7组受试轴承的振动退化量,对比在完整数据和带有缺失数据情况下的分析结果,发现可合理利用原舍弃不合规试验的部分有效信息,使之增加可靠性评估的样本数,从而得到较不用这些数据更为准确的结果,且所得结果较用完整数据结果绝对值相差在01以内。对比由极大似然估计法和加权E-Bayes法分析试验寿命数据的结果,发现该方法所得评估结果更优,与试验实际相比误差在10%以内,对于提高评估精度及降低试验成本有积极的实际意义。     

纯电动城市客车EMB执行机构驱动电机制动性能分析

传统气压制动系统存在压缩机、制动油箱和空气管路,占据较大空间,而采用电子机械制动(EMB)系统代替,不但可以减小空间,还能实现对夹紧力的快速响应和精确控制。以纯电动城市客车为目标车型,讨论了EMB执行机构方案,根据传统气压盘式制动器最大夹紧力推导出电机的堵转转矩和空载转速。据此设计了永磁无刷直流驱动电机,堵转转矩为10 N·m,空载转速为370 r/min。在Maxwell 2D中搭建驱动电机有限元模型,分析电机在消除间隙阶段和夹紧力增加阶段的制动性能。结果表明所设计的驱动电机制动性能可满足要求。     

Effects of yaw-roll coupling ratio on the lateral-directional departure prediction and restraint

The experimental data obtained from yaw-roll coupled wind tunnel tests are used for lateral-directional departure prediction, by linearizing the_b model to extract nominal dynamic derivatives at each coupling ratio.The prediction results are compared with those of the existing engineering methods which are based on the conventional aerodynamic derivatives.The comparison shows that the yaw-roll coupling ratio has a great influence on the departure susceptibility.The departure resistance will loss in partial region of the coupling ratio when the angle of attack is higher than a critical value.According to the stable and unstable regions of coupling ratio, a two-segment stability augmentation system with two different feedback gain matrices is obtained by pole-placement method.The two-segment stability augmentation system is used in the simulations of straight and level flight, steady turn, spin recovery and Herbst maneuver.The simulation results are also compared with the applications of a fixed-gain stability augmentation system designed by the conventional aerodynamic derivatives.When the yaw-roll coupling effects are fully considered, the two-segment stability augmentation system is more effective for departure restraint and can provide a better flying quality with less control energy.