Stifness modeling and analysis of a novel 4-DOF PKM for manufacturing large components

Faster response to orientation varying is one of the outstanding abilities of a parallel kinematic machine（PKM）.It enables such a system to act as a reconfgurable module employed to machine large components effciently.The stiffness formulation and analysis are the beforehand key tasks for its parameters design.A novel PKM with four degrees of freedom（DOFs）is proposed in this paper.The topology behind it is 2PUS-2PRS parallel mechanism.Its semianalytical stiffness model is frstly obtained,where the generalized Jacobian matrix of 2PUS-2PRS is formulated with the help of the screw theory and the stiffness coeffcients of complicated components are estimated by integrating fnite element analysis and numerical ftting.Under the help of the model,it is predicted that the property of system stiffness distributes within the given workspace,which features symmetry about a certain plane and is also verifed by performing fnite element analysis of the virtual prototype.Furthermore,key parameters affecting the system stiffness are identifed through sensitivity analysis.These provide insights for further optimization design of this PKM.     

氙离子推力器束流分布特性研究

建立了离子推力器束流分布的高斯模型,以200mm氙离子推力器为例,在不同工作环境下对推力器束流分布进行了数值模拟,并通过试验测量了推力器引出切面不同位置(轴向z=50mm,z=100mm)下的径向束电流密度和束离子密度分布。通过对数值模拟结果与试验测量结果的比较,误差为17%,认为数值模拟结果与试验测量结果吻合较好。表明离子推力器引出束流呈轴对称分布,在推力器出口附近,束离子密度很大,越往下游,密度越小且束流出现发散。     

基于LMI活塞式发动机恒转速H∞动态输出反馈控制

汽油发动机具有非线性、时变时滞等特点, 传统PID控制方法很难保证发动机整个工作范围内恒转速控制的稳定性及性能要求.采用基于LMI(linear matrix inequality)的输出反馈H∞控制算法, 来实现活塞式汽油发动机的恒转速控制, 使其在负载扰动、工况变化和可变时间延迟的情况下都能保持期望的参考转速.离线仿真结果表明, 所设计的控制器满足小型无人直升机对发动机控制的抗干扰性、跟踪性要求, 并具有一定鲁棒性.      

弹性支撑条件下裂纹齿轮体有限元模拟与仿真

将齿轮与轴的装配支撑关系考虑为弹性支撑, 采用有限元数值分析ANSYS软件对故障齿轮的动力特性进行了模拟.研究了裂纹故障发生后齿轮动力特性的变化, 分析了不同大小和不同类型的故障对齿轮体动力特性的影响.结果表明:裂纹的大小和位置对动力特性都有影响, 但裂纹发生位置的影响要大于裂纹大小的影响, 即处于齿轮结构体中部的缺陷要比处于外边缘的缺陷对动力特性影响大.另外, 探讨了仿真时设置弹性支撑边界条件的方法, 并通过与固定支撑和自由支撑边界条件的比较, 给出了弹性支撑条件下分析结果的真实性和有效性, 为齿轮故障发生机理和诊断的研究提供了一种方法.      

The role of AVDR in linear cascade testing

Linear cascade testing plays an important role in the research and development of turbomachinery and is widely used over the world.The ideal cascade model of a turbomachinery blade row is two-dimensional.In actual linear cascade testing, the flow through the test section converges due to the development of the boundary layer and secondary flow along the sidewall surfaces of the test section.Axial velocity density ratio(AVDR) is adopted to account for the deviation of the tested cascade flow from the ideal 2D model.Among numerous published cascade works, the influence of AVDR on cascade performance is seen to be complicated with many affecting factors, such as those related to cascade/blade geometry and flow conditions.Also, controlling AVDR is limited by the facility capability.Furthermore, real blade-to-blade flow in turbomachines is usually associated with AVDR greater than unity due to limited span of blades between the hub and shroud such that cascade testing without reducing AVDR could be favored sometimes.All these facets add complexity and diversification to the matter.The current paper reviews previous studies and results on AVDR.Consolidated understanding on the role of AVDR and recommendations on how to deal with it in linear cascade testing are provided.      

高性能的标准单元库设计

从仿真和流片两个方面对标准单元库的验证方法进行了研究.在仿真方面,提出了采用静态时序分析工具和SPICE仿真工具对单元的估算值和仿真结果进行比较分析的方法来验证,同时还给出了具体的操作步骤实例.在流片验证中,提出了一种非常有效的电路结构.这种电路结构不但能够准确验证时序,还能极大地减少PAD数量;最重要的特点是:该电路能够完全避免PAD和非被测单元的引入带来的额外延迟,从而得到准确的被测单元延迟.     

时间的模糊区间段表示及其运算

介绍了Allen的区间代数及其扩展--INDU网络,将Heisenberg不确定性原理应用于INDU网络,将INDU的25种基本关系中两区间有端点相等的或区间段相等的这15种关系删除,这15种关系在现实世界中是不可能出现的,就产生了有10种基本关系的FINDU网络,给出了FINDU网络的复合运算表.FINDU网络在军事多自主体系统中可以得到很好的应用.     

数字闭环光纤陀螺的调制串扰误差

 通过分析数字闭环光纤陀螺的阶梯波调制信号与输出死区、周期噪声干扰及小角速度漂移的关系,提出了调制串扰误差的概念。指出调制信号与探测器输出信号之间的电交叉耦合及调制信号产生的调制误差是产生调制串扰误差的干扰源。将调制串扰通道模型简化为比例环节和部分积分环节,并和光纤陀螺理想模型结合,建立了光纤陀螺调制串扰误差模型,利用该模型推导出了产生死区的条件及周期噪声干扰和小角速度漂移造成的输出偏差表达式,并对周期噪声的幅值、频率与陀螺输出量级、带宽之间的关系进行了定量分析。调制串扰误差的仿真和实验结果与理论分析结果基本一致,验证了调制串扰误差模型的正确性。     

基于牛顿欧拉法的3-RPS并联机构逆动力学分析

 以3-RPS机构为例,研究了对称少自由度并联机构的逆动力学问题。因其自由度数目小于6,该类机构的支链不仅传递驱动力,同时还需为动平台提供约束。然而,现有文献大多未对广义约束力给予足够的重视。采用牛顿欧拉法建立了3-RPS机构的刚体动力学方程,给定动平台的运动规律及外载荷后,可一并求解机构所需的驱动力与约束力矩。算例仿真表明,与动平台自由速度方向不一致的外载荷主要需由约束力矩平衡。因此,在对称少自由度并联机构动力学设计中,必须计入广义约束力的影响。     

深空探测器热控系统设计方法研究

针对国外深空探测器热控系统设计方法进行了调研和综述,并在此基础上提出了深空探测器的热控系统设计特点,为我国深空探测器热控系统的设计提供参考。