利率模型的动态估计

利率模型主要用来描述利率的动态行为，迄今为止大多数利率模型都是在CKLS框架之下进行的实证研究。这一模型主要表现为两点不足：一是模型漂移假定为利率水平的线性形式，二是短期利率的波动性假定为利率水平的函数，这两个假定都与实际不符，直接在这一框架下描述我国利率的变动显然是不合适的。文章尝试提出一个新的利率模型，这一模型既考虑了利率变动的非线性特征，又考虑了波动率，结果表明该模型能够较好地描述我国利率变动特征，对我国市场利率的动态行为具有较好的解释力。     

Ti/ZrO2界面反应研究

借助DSC、SEM分析，分别对Ti-ZrO     

基于三参数幂函数的低周疲劳寿命预测方法研究

为了找到能够更好地预测材料低周疲劳寿命的方法,基于三参数幂函数公式,对引起材料疲劳损伤的原因进行分析,提出了描述损伤能密度与疲劳寿命关系的寿命预测模型。采用高温合金与钛合金等多种材料的低周疲劳试验数据对提出的模型进行分析验证,并将分析结果与传统的Masson-Coffin模型和三参数幂函数公式的分析结果进行对比。结果表明:所提出的损伤能密度模型对不同条件下的材料数据的拟合效果较好,七种不同条件下的材料数据拟合结果中,有六种的相关系数大于0.9,且所有条件下的寿命预测点都在2倍分散带以内,精度高于另两种模型,并且该模型能够确切地描述引起材料低循环疲劳损伤的原因,简洁明了。     

Combustion efficiency test method in scramjet engine

A scramjet engine combustion efficiency measure system was designed.The combustion efficiency was measured by chromatography method,and the results of chromatography method were compared with those of temperature method.The results indicate that the combustion efficiency measured by chromatography method was 80.7%,lower than the combustion efficiency of 84.5%measured by temperature method;the combustion efficiency could be measured more precisely by chromatogram method than by temperature method.The combustion efficiency measure system based on chromatogram method can work well,and thus can be used to measure the combustion efficiency of scramjet engine.     

燃气轮机燃烧室中的管路设计

燃气轮机燃烧室中的管路主要用于供油、引气和测试等,其重要性往往易被忽视,而成为故障易发部位。为了提高燃气轮机燃烧室管路部件的可靠性,从实际应用出发,分析总结了燃烧室的管路设计中需要考虑的管路材料、直径以及壁厚的选择,形状的确定,相配件的热膨胀协调、卡箍与支架的设计,振频及动应力计算与测试,焊接方式的选择与工艺控制,后期校形控制等主要因素。通过对以上各设计细节的控制,可以从根本上解决管路易出现的各种问题,降低燃烧室管路故障发生的概率。     

单级感应线圈炮能量转换效率研究

在单级感应线圈炮的发射过程中,随着电容器组放电电压、电容量以及电枢初始位置的变化,弹丸出口速度和系统能量转换效率也将随之发生变化.为获得其中的规律,建立了单级感应线圈炮的数学模型,仿真分析了电容器组放电电压、电容量以及电枢初始位置对弹丸出口速度及系统能量转换效率的影响.分析结果表明,随着放电电压增加弹丸出口速度几乎呈直...     

航空发动机新型补燃增推燃烧室的现状与发展

涡轮后框架一体化加力燃烧室（简称涡轮后框架燃烧室）和涡轮间燃烧室均是为了提高推进效率和降低耗油率而新近开发和验证的2种先进补燃增推燃烧室。综述了2种燃烧室的基本结构、研制背景、发展历程和目前研究进展,总结了从众多研究中获得的这2种燃烧室相对常规结构的性能特点,如涡轮后框架燃烧室结构紧凑,流体损失小,结构耐久性好;涡轮间燃烧室推进效率高,热效率高。还指示了这2种燃烧室的发展趋势。     

尚逸帆，康志宇，张庆展，杨东春

美国和苏联现有的舱外载人机动装置（MannedManeuveringUnit,MMU）推进系统设计均采用两套独立系统互为备份的方式,主系统故障后可以启动备用系统,但备用系统故障则无应对方案,因此制约航天员的安全性和舱外活动能力。文章在常规主备份推进模式基础上提出了应急推进模式,备份推进器发生故障后,根据失效发动机组相对位置关系采用不同应急策略,剩余有效推进器通过联合控制的方式保证航天员六自由度控制。经过可行性分析和仿真计算,证明了应急模式下MMU推进能力有一定降低,但能够为航天员返回提供动力,应急推进模式具有可行性。     

Nonlinear Adaptive Robust Force Control of Hydraulic Load Simulator

This paper deals with the high performance force control of hydraulic load simulator. Many previous works for hydraulic force control are based on their linearization equations, but hydraulic inherent nonlinear properties and uncertainties make the conventional feedback proportional-integral-derivative control not yield to high-performance requirements. In this paper, a nonlinear system model is derived and linear parameterization is made for adaptive control. Then a discontinuous projection-based nonlinear adaptive robust force controller is developed for hydraulic load simulator. The proposed controller constructs an asymptotically stable adaptive controller and adaptation laws, which can compensate for the system nonlinearities and uncertain parameters. Meanwhile a well-designed robust controller is also developed to cope with the hydraulic system uncertain nonlinearities. The controller achieves a guaranteed transient performance and final tracking accuracy in the presence of both parametric uncertainties and uncertain nonlinearities; in the absence of uncertain nonlinearities, the scheme also achieves asymptotic tracking performance. Simulation and experiment comparative results are obtained to verify the high-performance nature of the proposed control strategy and the tracking accuracy is greatly improved.     

Experimental investigation on ice-breaking performance of a novel plasma striker

Aircraft icing has long been a plague to aviation for its serious threat to flight safety.Recently, researches about a newly proposed deicing method based on Plasma Synthetic Jet Actuator(PSJA) have just started. To meet the requirements of in-flight deicing, structure of PSJA needs to be adjusted. This paper completed the detailed design and experimental validation of a novel plasma striker, which was a modified version of PSJA. Influences of mass of the moving part and rod shapes on the ice-br...