Modal control of the planar motion of a long flexible beam in orbit

Attitude control techniques for the pointing and stabilization of very large, inherently flexible spacecraft systems are investigated. The attitude dynamics and control of a long, homogeneous flexible beam whose center of mass is assumed to follow a circular orbit is analyzed. In this study, first order effects of gravity-gradient are included, whereas external perturbations and related orbital station keeping maneuvers are neglected. A mathematical model which describes the system deflections within the orbital plane has been developed by treating the beam as having a maximum of three discretized mass particles connected by massless, elastic structural elements. The uncontrolled dynamics of this system are simulated and, in addition, the effects of the control devices are considered. The concept of distributed modal control, which provides a means for controlling a system mode independently of all other modes, is examined. The effect of varying the number of modes in the model as well as the number and location of the control devices are also considered.     

Low-velocity detonations in cast and pressed high explosives

A model of low velocity detonations in charges of cast and pressed high explosives confined in metal tubes with thin walls is suggested. An analytical solution is obtained and velocities and pressures of stationary LVD waves are calculated as functions of the parameters of the wall confinement. The fraction of the total chemical energy transferred to maintain the shock wave and the average rate of reaction in the wave are estimated and the dynamics of transient predetonation processes are analysed. An explanation of the causes of the secondary shock wave formation in the transition from deflagration to normal detonations is suggested and the delay of this secondary wave is calculated and compared with experimental data.     

8mm辐射计特性参数测试及定标

文中简介了小口径天线毫米波辐射计定标系统的设计原理、结构、输出亮温的计算模型 ,研究了从液氮温度到室温范围内进行多点定标的方法 ,并对 8mm辐射计进行了特性参数测试及定标实验 ,得出了微波辐射计的定标方程和灵敏度、线性度、稳定度以及积分时间等指标。在该系统上按给定的程序进行定标 ,精度为 1 .0 6K。     

正互反矩阵一致性的充要条件

本文论述了正互反矩阵一致性的充要条件,并给出了证明.     

天地一体化遥感信息应用网络体系的发展

随着世界各国发射入轨的航天器的增多 ,由多种遥感卫星系统组成的 ,包括地面应用系统在内的天地一体卫星应用网络体系即将形成。文章介绍了国外天地一体化网络系统建设方面的现状与趋势 ,分析了天地一体化遥感信息应用网络体系的特点 ,并指出了中国建设天地一体化遥感应用网络体系的必要性     

Transport Characteristics of Macroparticles in Dusty Plasma Induced by Solar Radiation under Microgravity Conditions

The transport characteristics of macroparticles, charged by the solar radiation under microgravity conditions, were investigated by analyzing the videorecords of experiments carried out onboard the Mirorbital station. The temperature, distributions of velocities, charge, friction coefficient, and diffusion coefficient were obtained for bronze particles.     

The Solution of Some Problems of Optimizing the Processes of a Flexible Correction of Motion of Satellite Systems: I

The first of a series of problems of the optimization of correction of satellite systems, moving over near-circular orbits, is considered. The correction is accomplished by means of low-thrust engines and is supposed to be flexible, where only the parameters of the relative motion of satellites must be corrected. The problem has a large dimension, but is invariant with respect to renumbering of satellites. This allows us to decompose the problem, i.e., to find new variables, linearly dependent on old ones, in which the problem breaks down into a series of independent subproblems of low dimension. The decomposition is accomplished by means of the technique [1] based on the theory of linear representations of groups.     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

基于双目视觉的返回舱着陆横向速度测量

通过分析返回舱在着陆时所具有的水平速度也可能对着陆安全构成威胁的事实，论述了为返回舱增加横向缓冲装置的必要性，由此提出亟需解决的问题——在返回舱着陆下降过程中测量其水平运动速度。提出了全新概念的以视觉图像为唯一信息来源的返回舱水平速度测量方法，仅以双目摄像机系统作为传感器，避免了对返回舱原有传感器系统的改造。通过对着陆区域地面图像的采集和在线处理，利用双目交会测量原理得到返回舱当前的大地坐标和姿态。仿真实验证明，方法简单易行，测量结果可靠。     

液体火箭发动机在高空工作期间喷管及其周围流场研究

研究了液体火箭发动机(简称火箭发动机)在不同高度飞行时喷管内及喷管周围的气流流动参数分布与高度的变化关系.研究结果表明火箭发动机当其工作高度低于设计高度很多时,燃气在喷管内流动时将会产生激波;当工作高度接近设计高度时,燃气在喷管内流动时将产生微弱的斜激波;当工作高度超过设计高度时,燃气在喷管外将会产生"羽流","羽流"的面积随着飞行高度的增加而变大;当飞行高度大于设计高度时,应考虑燃气"羽流"对发动机及所携带载荷的影响,所携带载荷应有热及污染的防护措施;此时喷管应采用变面积比的喷管,即高度补偿喷管,此喷管的面积比随着飞行高度的增加而增大.