Dynamics and control of variable-geometry truss structures

Variable-geometry truss structures are likely to be used extensively in the future for in-orbit space construction. This paper considers dynamics formulation and vibration control of such structures. The truss system is modelled as a collection of sub-structures consisting of truss booms, prismatic actuator elements, and in some cases a manipulator at the end. Each truss boom is treated as a separate ‘link’ and its flexibility is modelled using the finite element method. Equations of motion for individual sub-structures are obtained which are then assembled. The non-working constraint forces are eliminated to obtain the equations governing the constrained dynamics of the entire system. For vibration control, the singular perturbation method is employed to construct two reduced-order models, for quasi-static motion and for modal co-ordinates, respectively. Computed torque with PD control is applied to maintain the quasi-static motion, while an optimal LQR method is used for vibration control. Typical simulation results are presented for the planar case.     

微重力环境中重力梯度加速度引起的流体晃动力和力矩的模拟

本文研究了关于旋转轴在贮箱的非对称轴上且远离贮箱的几何中心情况下，流体在微重力环境中由重力梯度加速度诱发的晃动特性。我们以精密Ｘ光光谱天文物理实验卫星（简称ＡＸＡＦ－Ｓ）作为研究对象，获得了由于旋转运动引起的重力梯度加速度的数学表达式。关于晃动问题的数值计算是用与卫星固连的非惯性坐标系为基础，目的是寻求一种较为易处理且适合于流体力学方程的边界和初始条件。通过数值计算获得了流体作用于卫星贮箱上的力和力矩。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

Radial velocity search for low mass companions of nearby stars

The detection of substellar companions of nearby stars is very difficult, because these objects are very faint and are located close to their bright parent stars. One way to attack this problem is to look for small periodic motion of the bright star, induced by the gravitational attraction exerted by the unseen small companion. Over the past decade stellar spectroscopy has been used by a few teams to monitor the radial velocities of several samples of stars, with a threshold for detection of companions well below the substellar limit of about 0.08 M. So far, only a few possible spectroscopic binaries have been identified where the unseen companions might be substellar.Recently, radio observers discovered that the millisecond pulsar PSR B1257+12 displays periodic variations in the pulse arrival times, indicating the existence of at least three unseen companions in circular orbits around the pulsar. This is the first convincing case for an extra-solar planetary system. This discovery suggests that planetary systems can form in very different situations, and therefore may prove to be common.     

Future spacelift projections

In 1996 the NASA Advisory Council asked for a comprehensive look at future launch projections out to the year 2030 and beyond. In response to this request NASA sponsored a study at The Aerospace Corporation to develop long-range space transportation models for future commercial and government applications, and to analyze the design considerations and desired characteristics for future space transportation systems. Follow-ons to present space missions as well as a wide array of potential new space applications are considered in the study. This paper summarizes the space transportation system characteristics required to enable various classes of future missions. High reliability and the ability to achieve high flight rates per vehicle are shown to be key attributes for achieving more economical launch systems. Technical, economic and policy implications are also discussed.     

Biological induced corrosion of materials II: New test methods and experiences from mir station

During previous long-term manned missions, more than 100 species of microorganisms have been identified on surfaces of materials (bacteria and fungi). Among them were potentially pathogenic ones (saprophytes) which are capable of active growth on artificial substrates, as well as technophilic bacteria and fungi causing damages (destruction and degradation) to various materials (metals and polymers), resulting in failures and disruptions in the functioning of equipment and hardware.

Aboard a space vehicle some microclimatic parameters are optimal for microorganism growth: the atmospheric fluid condensate with its specific composition, chemical and/or antropogenic contaminants (human metobolic products, etc.) all are stimulating factors for the development of bacteria and mould fungi on materials of the interior and equipment of an orbital station during its operational phase(s).

Especially Russian long-term missions (SALJUT, MIR) have demonstrated that uncontrolled interactions of microorganisms with materials will ultimately lead to the appearence of technological and medical risks, significantly influencing safety and reliability characteristics of individual as well as whole systems and/ or subsystems.

For a first conclusion, it could be summarized, that countermeasures and anti-strategies focussing on Microbial Contamination Management (MCM) for the International Space Station (ISS, next long-term manned mission) at least require a new materials test approach.

Our respective concept includes a combined age-ing/biocorrosion test sequence. It is represented here, as well as current status of MCM program, e.g. continuous monitoring (microbiological analyses), long-term disinfection, frequent cleaning methods, mathematical modeling of ISS, etc.     

Function,geometry and spatial prepositions: Three experiments

In this paper the results of three experiments are reported whichaddress the issue of the relative extent to which functionalrelations versus geometric relations affect spatial language. Theexperiments examine the role of a discourse context on the useand rating of the preposition in to describe a visual scenewhere the constraint of spatial containment between figure(object located) and ground (reference object) does not hold. Allthree experiments demonstrate that in is used more andrated to be significantly more appropriate in a functionalcontext than in a no context condition. The implications of thesestudies for spatial language and spatial representation arediscussed.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

A security space capability for Europe? Implications for US policy

As the European Union takes tentative steps towards creating a “rapid reaction force” able to operate independently of NATO, an important question is what capabilities that force must have in order to operate effectively. Among those capabilities is the use of space systems for communications and intelligence applications. This article examines the prospects for an independent security space capability in Europe, and the implications of the emerging European interest in space autonomy for US policy.     

Evolution of Rotational Motion of a Symmetrical Satellite with Viscoelastic Rods

We study the motion of a symmetrical satellite with a pair of flexible viscoelastic rods in a central Newtonian gravitational field. A restricted problem formulation is considered, when the satellite's center of mass moves along a fixed circular orbit. A small parameter is introduced which is inversely proportional to the stiffness of flexible elements. Another small parameter is equal to the ratio of the squared orbital angular velocity and the squared magnitude of the initial angular velocity of the satellite. In order to describe the satellite rotational motion relative to the center of mass, we use the canonical Andoyer variables. In the undisturbed formulation of the problem, i.e., at = 0 and = 0, these variables are the action–angle variables. Equations describing the evolution of motion are derived by an asymptotic method which combines the method of separating motions for systems with an infinite number of degrees of freedom and the Krylov–Bogolyubov method for systems with fast and slow variables. The manifolds of stationary motions are found, and their stability is investigated on the basis of equations in variations. Phase portraits are constructed which describe the rotational motion of a satellite at the stage of slow dissipative evolution.