空间相机像移补偿方法研究

介绍了空间相机拍照时产生像移的机理及国内外目前较常使用的不同像移补偿方法,并对光、机、电等不同实现方法进行分析比较,得出各种方法的优缺点及适用范围。     

基于DS18B20的智能温度控制器

基于DS18B20的智能温度控制器采用单总线数字温度传感器,硬件结构简单,测量精度高,抗干扰能力强,重点介绍DS18B20的特性和编程要点。     

交互式PID温度控制系统的设计

本文介绍了一种新型的PID温度控制系统。该系统利用单片机可以方便地实现对PID参数的选择与设定；也可以通过计算机与单片机的串行通讯，实现工业过程中的交互式PID控制。     

用EXCEL设计会计报表系统软件

利用Microsoft Excel强大的表格功能设计会计报表系统，可以简化会计报表软件的开发设计的难度，提高开发设计的效率。Excel开发会计报表系统主要的工作是设计个性化的菜单及编制从相应会计软件系统的数据库中取数的函数。本文主要分析会计报表系统的功能模型及利用Excel内置的VBA的设计个性化菜单。     

2D碳/碳复合材料CVI过程的数值模拟研究

本文根据３Ｄ碳／碳复合材料的结构特征及ＣＶＩ工艺的特点建立了孔隙模型和动力学模型，并利用该模型对其ＣＶＩ过程进行了模拟与分析。模拟结果与实验结果的对比表明该数学模型是合理的。     

The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

Drying as one of the extreme factors for the microflora of the atmosphere

An investigation of the effects of drying and drying-rewetting cycles under vacuum conditions of 10(-2) torr at -30 degrees C on conidia of the atmospheric strain Penicillium chrysogenum from 48-77 km heights, collected by meteorological rockets found that survival and restoration of the initial physiological properties were possible through some very efficient protective cellular mechanisms. Such adaptive possibilities explain the widespread diffusion of microbial cells throughout the biosphere of our planet.     

Phugoid oscillations in optimal reentry trajectories

A major problem with operations of lifting reentry vehicle having an aft center-of-gravity location due to large engine mass at the rear is the required hypersonic trim to fight the desired trajectory. This condition is most severe for lifting maneuvers. As a first step toward analyzing this problem, this paper considers the lift requirement for some basic maneuvers in the plane of a great circle. Considerations are given to optimal lift control for achieving the maximization of either the final altitude, speed or range. For the maximum-range problem, phugoid oscillation along an optimal trajectory is less severe as compared to a glide with maximum lift-to-drag ratio. An explicit formula for the number of oscillations for an entry from orbital speed is proposed.     

含碳酸钙的负压强指数复合固体推进剂燃烧机理

本文采用激光阴影高速摄影、扫描电子显微镜、X光电子能谱,对含和不含CaCO_(3)的三种夹心件及SO4-5A PU复合推进剂的燃烧过程、燃面形貌、化学成分和覆盖分数分别进行了研究和测定。结果表明:CaCO_(3)在低压下(〈1.96MPa)提高AP的燃速,在高压下(〉1.96MPa)起降速作用;CaCO_(3)与AP反应生成CaCl_2,并促使AP熔化;燃面上CaCl_2含量随压强上升而增加;PU熔化流动对AP表面的覆盖在mesa区内随压强而升高,在非mesa区的低压区也存在。基于以上实验结果,对含CaCO_(3)的PU负压强指数推进剂的燃烧机理进行了讨论。