Dynamics of electron fluxes in the slot between radiation belts in November–December 2014 according to data of the <Emphasis Type="Italic">Vernov</Emphasis> satellite

The variations in the spatial structure and time in electron fluxes with E = 235–300 keV in the slot region (2 < L < 3) between the radiation belts in the period of November 1, 2014 through December 8, 2014 during weak and moderate geomagnetic disturbances (Kp < 4, Dst >–60 nT) are analyzed based on the data of the RELEC complex on board the Vernov satellite (the height and inclination of the orbit are from 640 to 830 km and 98.4°, respectively). Irregular increases in the fluxes of such electrons and formation of a local maximum at L ~ 2.2–3.0 were observed. It has been shown that the intensity of this maximum is inversely proportional to the L value and grows with an increase in the geomagnetic activity level. New features discovered for the first time in the dynamics of radiation belt electrons manifest in the variations in the local structure and dynamics of fluxes of subrelativistic electrons in the slot region.     

Trends in research of hydrodynamic damping in rotor supports of gas turbine engines

The paper studies different types of dampers for rotor supports of gas turbine engines (GTE). The advantages of hydrodynamic dampers are shown. Hydrodynamic dampers for GTE rotor supports are studied. A new design and technique of calculation are proposed for an adjustable hydrodynamic damper.     

Hardware reconfiguration algorithm in multiprocessor systems of integrated modular avionics

Reconfiguration of multiprocessor systems makes it possible to improve their failure-resistance that is especially important for the integrated modular avionics systems. The algorithm considered in this paper allows minimizing the reservation and providing the better safety level and more effective flight completion or even its further execution in the case of failures of airborne equipment.     

高性能产品(零件)制造技术特征现状的研究分析

系统分析各类高性能制造以注重零件的几何尺寸精度所带来的问题,即在具备超精密、高精度加工能力后,由"合格的高精度零件"装配出的产品至今依然还是合格率低、参数稳定性差的本质内因.首次从零件制造微观角度提出了产品生产合格率低、参数稳定性差是由零件表面微观特征与产品技术特征非匹配性导致的,提出了全新的产品制造理念,从注重零件的几何尺寸精度向关注零件制造微观工艺特征与产品技术特征的匹配性和符合性转变.形成和建立起我国自主创新的高性能产品制造思想和产品制造工艺技术体系,才能从根本上解决产品生产制造合格率低、参数稳定性差等问题,才能形成有继承性、可持续、稳定的产品制造技术体系,而这一切是工业4.0制造模式无法解决的.     

Time-dependent cosmic ray modulation

Time-dependent cosmic ray modulation is calculated over multiple solar cycles using our well established two-dimensional time-dependent modulation model. Results are compared to Voyager 1, Ulysses and IMP cosmic ray observations to establish compatibility. A time-dependence in the diffusion and drift coefficients, implicitly contained in recent expressions derived by , ,  and , is incorporated into the cosmic ray modulation model. This results in calculations which are compatible with spacecraft observations on a global scale over consecutive solar cycles. This approach compares well to the successful compound approach of Ferreira and Potgieter (2004). For both these approaches the magnetic field magnitude, variance of the field and current sheet tilt angle values observed at Earth are transported time-dependently into the outer heliosphere. However, when results are compared to observations for extreme solar maximum, the computed step-like modulation is not as pronounced as observed. This indicates that some additional merging of these structures into more pronounced modulation barriers along the way is needed.     

Attitude control system of the first Russian nanosatellite <Emphasis Type="Italic">TNS-0 no. 1</Emphasis>

The results of designing the attitude control system of the first Russian nanosatellite TNS-0 no. 1 providing orientation of its longitudinal axis along the local geomagnetic field induction vector are presented. The system consists of a permanent magnet and two sets of hysteresis rods. The magnetic and geometric parameters of the magnet and rods are calculated. The influence of the permanent magnet field on the hysteresis rods and mutual influence of the rods in the case of compact satellite packaging are analyzed. Examples of calculations of transient processes and steady-state angular satellite motion are presented.     

Evaluation of the Terrestrial Albedo Applied to Some Scientific Missions

Using the Earth albedo model and the orbital dynamics model developed as part of the First Look Project (Fast Initial In-Orbit Identification of Scientific Satellites) the terrestrial albedo is evaluated considering the orbits of some scientific missions as Gravity Probe B, MICROSCOPE and STEP. The model of the Earth albedo is based on the reflectivity data measured by NASA’s Earth Probe satellite, which is part of the TOMS project (Total Ozone Mapping Spectrometer). The reflectivity data are available daily, on line at the TOMS website, and they fluctuate because of changes in clouds and ice coverage and seasonal changes. The data resolution partitions the Earth surface into a number of cells. The incident irradiance on each cell is used to calculate total radiant flux from the cell. With the radiant flux from each cell, the irradiance at the satellite is calculated.     

The Juno Waves Investigation

Jupiter is the source of the strongest planetary radio emissions in the solar system. Variations in these emissions are symptomatic of the dynamics of Jupiter’s magnetosphere and some have been directly associated with Jupiter’s auroras. The strongest radio emissions are associated with Io’s interaction with Jupiter’s magnetic field. In addition, plasma waves are thought to play important roles in the acceleration of energetic particles in the magnetosphere, some of which impact Jupiter’s upper atmosphere generating the auroras. Since the exploration of Jupiter’s polar magnetosphere is a major objective of the Juno mission, it is appropriate that a radio and plasma wave investigation is included in Juno’s payload. This paper describes the Waves instrument and the science it is to pursue as part of the Juno mission.     

The adjustment of the mathematical model accuracy of the gas-hydraulic flight control actuator power circuit of an aircraft

The methodology is proposed and the mathematical model is developed for the purpose of numerical simulation of the power circuit of the gas-hydraulic actuator with displacing power source for the gimbaled nozzle control. It provides the highest power efficiency factor of the actuator as a part of aircraft by means of pulling together the profiles of available and required power.     

Flux and isotopic composition of helium in the ancient solar wind

The isotopic composition and concentrations of helium are investigated in 9 samples taken from different depths of a soil column delivered by the Luna-24 mission. It is demonstrated that, with allowance made for random errors, the isotopic composition of helium remains invariable. The concentrations of helium are subject to considerable variations, the increases and decreases relative to the average value reaching a factor of 1.5–2. Assuming that the full length of the soil column was formed due to long-term accumulation of lunar clastic rocks (regolith), based on measurements of cosmogenic isotopes, a method of determining the rate of regolith accumulation has been developed, as well as a method of determining the age of the column soil samples. It is found that the rate of regolith accumulation is variable, and it changes over the column length within the limits (0.2–0.8 cm)/10⁶ years. The range of the time for formation of the investigated part of the column is 100–600 million years. The observed decreases of concentration (at 250 and 600 million years) can be associated with both solar and lunar processes. In particular, a possibility of diffusion losses of helium due to the mechanism of jump-like diffusion is discussed, and diffusion parameters are found. A comparison of time periods of the observed variations in the solar wind with paleontological epochs and periods is made.