原位合成TiC/Ti基复合材料氧化行为

研究了TiC/Ti基复合材料在550℃,600℃和650℃空气中恒温氧化行为.分析了增强体TiC对钛基复合材料氧化动力学行为的影响,并用X射线衍射仪(XRD)和配有能谱仪(EDS)的扫描电子显微镜(SEM)对氧化层表面的相组成、形貌以及氧化层剖面的显微结构进行了分析.结果表明:TiC/Ti基复合材料的氧化层由金红石型的氧化物TiO2组成;增强体TiC能够提高钛基复合材料的抗氧化性,而且随着TiC增强体含量的增加,钛基复合材料的抗氧化性增加;这主要是因为TiC增强体能够促进致密氧化膜的生成.氧化动力学曲线为抛物线类型.     

开关磁阻电机及控制系统仿真与建模

开关磁阻电机(SRM)应用广泛,但由于电机内部磁场的非线性和相电流难以解析等问题,因此高精确度的建模和仿真较为困难。电机及驱动系统建模的研究直接影响到电机的优化设计、动静态性能分析、控制策略的评估等。为此,介绍了一种SRM及控制系统的建模方法,利用Flux有限元软件搭建的电机本体模型与MATLAB搭建的控制系统进行联合仿真。通过试验,测得电机在不同运行状态下的电流波形,并与仿真结果比较。结果表明:不同控制方式下的电流波形与仿真结果一致,是一种行之有效的建模手段。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

Numerical investigation on flow and heat transfer characteristics of supercritical RP-3 in inclined pipe

Numerical simulations of flow and heat transfer to supercritical RP-3 through the inclined tubes have been performed using LS k–e model embedded in Fluent. The physical properties of RP-3 were obtained using the generalized corresponding state laws based on the fourcomponent surrogate model. Mass flow rate is 0.3 g/s, system pressure is 3 MPa, inlet temperature is 373 K. Inclination of the inclined pipe varied from -90° to 90°, with heat flux varied from 300 k W/m~2 to 400 kW/m~2. Comparison between the calculated result and the experimental data indicates the range of error reasonable. The results of ±45° show that temperature inhomogeneity in inclined pipe produce the secondary flow in its cross section due to the buoyancy force. Depending on the strength of the temperature inhomogeneity, there will be two different forms of secondary flow and both contribute to the convective heat transfer in the pipe. The secondary flow intensity decreases when the inhomogeneity alleviates and thermal acceleration will play a leading role. It will have a greater impact on the turbulent flow to affect the convective heat transfer in the pipe. When changing the inclination, it affects the magnitude of the buoyant component in flow direction. The angle increases, the buoyancy component decreases. And the peak temperature of wall dominated by the secondary flow will move forward and increase in height.     

一种复杂环境下的无线应急通信中继节点快速布点方法

无线应急通信作为综合应急保障体系的重要组成部分,在应对洪水、地震、海啸等自然灾害时有着传统网络无可比拟的便捷性和经济型.中继节点作为无线中继网络的关键环节,其选址将直接影响整个应急通信网络的性能.复杂环境无线应急通信中继节点选址依靠现场实地调查和测量,但会存在选址速度慢、中继节点冗余和通信链路质量差等问题.针对以往这些...     

基于覆盖圆的太阳同步回归轨道卫星目标轨迹调整方法

遥感卫星星座在环境监测、地理测绘等领域运用中,需要考虑目标轨迹分布的优化问题.轨迹分布与星座的重访能力和进出站间隔保持等应用需求密切相关.目前对星下点轨迹分布的优化和调整还缺乏准确实用的方法,存在卫星数目增多带来的计算量增加问题和对多种需求综合考虑不够的问题.为了克服现有技术的不足,解决太阳同步回归轨道遥感卫星星座的目...     

气体介质对排气式气囊缓冲特性影响研究

中国新一代载人飞船试验船研制过程中开发了一套组合式缓冲气囊.以新飞船返回舱为研究对象,通过流体力学和热力学理论推导,建立了含有内囊的组合式气囊缓冲过程动力学模型,并通过MSC-Dytran对其有效性进行了验证.之后通过仿真计算,分析了影响气囊缓冲特性的两项气体固有参数——气体自由度与摩尔质量——对气囊缓冲过程的影响.研...     

灵巧型大孔径四反星敏感器镜头设计

星敏感器镜头是星敏感器姿态轨道控制系统的重要组成部分,具有相对孔径大、工作谱段宽、绝对畸变低的特点,针对这些特点,在四反射镜初始结构的基础上,分析了镜头探测能力和相对孔径的关系,明确了镜头设计指标,利用非球面反射镜强大的像差校正能力,优化设计得到了全反射4反星敏感器镜头。镜头焦距170mm,轴向长度50mm,镜头F数2,等效入瞳直径51.2mm,圆视场±2.25°。镜头工作波段可由膜系决定,无色差,空间频率35lp/mm处传递函数优于0.6,畸变优于0.01%,弥散斑直径优于13μm,系统15μm范围内能量集中度优于80%,渐晕系数小于0.95,该镜头可用于亚像素精度的飞船姿态轨道控制系统,为星敏感器导航光学系统设计提供了参考。     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

基于伪寿命的加速退化机理一致性边界检验

根据寿命型随机变量的加速机理一致性条件,提出一种基于伪寿命的加速退化机理一致性边界检验方法,通过由低到高逐一对各个加速应力水平下的退化机理一致性进行检验,来确定加速退化机理一致性的边界应力水平.针对工程常用的两类寿命型分布——对数正态分布和Weibull分布,分别以对数标准差和形状参数为退化机理表征量,在产品伪寿命估计的基础上建立了退化机理表征量齐性检验的F统计量,导出了退化机理一致性检验拒绝域的解析式,给出了退化机理一致性边界检验的具体步骤.该方法能够充分利用多个应力水平下表征产品退化机理一致的横向信息,有效提高了检验的精度.以某镀膜平板玻璃热退化机理一致性边界温度的确定为例,分析说明了该方法的合理性与有效性.