TDE-85环氧树脂固化动力学的DSC和DMA研究

根据DSC和DMA测试曲线,分别用Kissinger、Flynn-Wall-Ozawa、Friedman-Reich-Levi模型计算了TDE-85/THPA环氧树脂体系的固化动力学参数。Kissering法所得活化能较低,其他几种计算方法所得活化能比较一致,相对误差在10%之内。将Gaussian分布应用于分峰法,计算了每个反应的动力学参数,模拟结果与DSC曲线具有很好的一致性。双峰表明,固化过程包含2个化学反应,缩水甘油脂基的反应活性比脂环基高。利用外推法确定了固化工艺为100℃/6 h 130℃/4 h 160℃/2 h。     

对我国导游报酬体制创新的探讨

目前在我国旅游行业中,以收取回扣为主的导游报酬体制己成为制约导游服务质量提高的根本原因,体制创新成为潜在必需。文章在分析了当前导游报酬体制现状的基础上,运用经济学中的帕累托改进原理解释了实施导游报酬“小费制”的合理性,并在此基础上提出了具体的实现途径,体现出该体制的优越性。     

高校教师教学质量评价体系及方法初探

教学质量是高校的生命线。但由于在考核制度中片面强调科研的重要性，缺乏科学的教学质量评价体系和方法。很多高校教师对教学投入的主动性和积极性不高，教学质量的监控已经是高校管理中一个很棘手的难题，教学质量的下滑已成为人们普遍关心的问题。根据当前高校教师教学质量评价体系和方法的现状，提出了高校教师教学质量评价体系的全面性和综合性，教学质量评价方法的多维性和动态性的观点。     

Autonomous Control Reconfiguration of Aerospace Vehicle Based on Control Effectiveness Estimation

未来空天飞行器跨空天两域飞行,要求有较高的自主性以适应由故障和环境变化带来的不确定因素。针对空天飞行器的不确定性,提出了自主控制重构方案。研究了线性模型的时变控制效益的估计方法,提出并证明了效益矩阵可估计的充分条件,给出了相应的算法并证明了其收敛性和对噪声的鲁棒性;提出了基于线性规划和模糊逻辑的控制分配算法,通过冗余效应器实现了不确定条件下的自主控制重构。系统集成和仿真结果分析验证了方案和算法的有效性。     

内装式机载发射运载火箭分离方案分析

针对一种内装式投放发射方案，建立了机载发射运载火箭分离过程的数学模型。本发射方案尢需对运载火箭进行改动。数值仿真结果表明．火箭在点火时有较好的姿态，适用于发射现有的中、小型运载火箭。     

危害性分析中的模糊数学方法

利用模糊集合理论对影响故障模式危害性的各因素进行了模糊化处理，建立了故障模式危害性评定的模糊评判模型，并阐述了模糊评判方法的基本步骤。     

微量气味成分的自由基簇射技术脱除

研究了密闭体系中微量气味污染物的脱除作用与机理。采用电晕放电自由基簇射技术，实现了人工环境下氧化性自由基的产生；以电子自旋共振技术（ESR）对气态羟基自由基实施了捕集和检测，验证了在羟基自由基的存在下NH3被氧化为N2。通过U—I获得反应能耗和污染物去除效率为：NH3脱除效率为90．6％时，能耗1．0W。研究表明：自由基簇射技术产生的氧化性自由基可有效去除密闭生存环境中产生的NH3等微量有害气味成分，将在空间站等密闭生存系统内空气净化中有很好的应用前景。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.