Removing orbital debris with lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collision cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoules lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.     

Activation of the tail open part during the magnetospheric storm

In each polar cap (PC) we mark out “old PC” observed during quiet time before the event under consideration, and “new PC” that emerges during the substorm framing the old one and expanding the PC total area. Old and new PCs are the areas for the magnetosphere old and new tail lobes, respectively. The new lobe variable magnetic flux Ψ₁ is usually assumed to be active, i.e. it provides the electromagnetic energy flux (Poynting flux) ɛ′ transport from solar wind (SW) into the magnetosphere. The old lobe magnetic flux Ψ₂ is supposed to be passive, i.e. it remains constant during the disturbance and does not participate in the transporting process which would mean the old PC electric field absolute screening from the convection electric field created by the magnetopause reconnection. In fact, screening is observed, but far from absolute. We suggest a model of screening and determine its quantitative characteristics in the selected superstorm. The coefficient of a screening is the β = Ψ₂/Ψ₀₂, where Ψ₀₂ = const is open magnetic flux through the old PC measured prior to the substorm, and Ψ₂ is variable magnetic flux through the same area measured during the substorm. We consider three various regimes of disturbance. In each, the coefficient β decreased during the loading phase and increased at the unloading phase, but the rates and amplitudes of variations exhibited a strong dependence on the regime. We interpreted decrease in β as a result of involving the old PC magnetic flux Ψ₂, which was considered to be constant earlier, in the Poynting flux ɛ′ transport process from solar wind into the magnetosphere. Transport process weakening at the subsequent unloading phase creates increase in β. Estimates showed that coefficient β during each regime and the computed Poynting flux ɛ′ varied manifolds. In general, unlike the existing substorm conception, the new scenario describes an unknown earlier of tail lobe activation process during a substorm growth phase that effectively increases the accumulated tail energy for the expansion and recovery phases.     

Relationship between the fluxes of relativistic electrons at geosynchronous orbit and the level of ULF activity on the Earth’s surface and in the solar wind during the 23rd solar activity cycle

We present the results of a cross-correlation analysis made on the basis of Spearman’s rank correlation method. The quantities to correlate are daily values of the fluence of energetic electrons at a geosynchronous orbit, intensities of ground and interplanetary ultra-low-frequency (ULF) oscillations in the Pc5 range, and parameters of the solar wind. The period under analysis is the 23rd cycle of solar activity, 1996–2006. Daily (from 6 h to 18 h of LT) magnetic data at two diametrically opposite observatories of the Intermagnet network are taken as ground-based measurements. The fluxes of electrons with energies higher than 2 MeV were measured by the geosynchronous GOES satellites. The data of magnetometers and plasma instruments installed on ACE and WIND spacecraft were used for analysis of the solar wind parameters and of the oscillations of the interplanetary magnetic field (IMF). Some results elucidating the role played by interplanetary ULF waves in the processes of generation of magneospheric oscillations and acceleration of energetic electrons are obtained. Among them are (i) high and stable correlation of ground ULF oscillations with waves in the solar wind; (ii) closer link of mean daily amplitudes of both interplanetary and ground oscillations with ‘tomorrow’ values of the solar wind velocity than with current values; and (iii) correlation of the intensity of ULF waves in the solar wind, normalized to the IMF magnitude, with fluxes of relativistic electrons in the magnetosphere.     

Effect of Semi-solid Isothermal Heat Treatment on Microstructure of VW63Z Alloy

The effects of isothermal heat treatment on the semi-solid microstructure evolution of VW63Z (Mg-6Gd-3Y-0.4Zr, wt.%) alloy are studied. It shows that the microstructure of VW63Z alloy could transform from equiaxed crystal to semi-solid spherical crystal after isothermal heat treatment above 620 ºC. With the heating temperature elevating from 620 ºC to 635 ºC and the holding time prolonging from 10 min to 35 min, the liquid fraction increases gradually. The semi-solid microstructure evolution of VW63Z alloy can be divided into three stages, i.e., particle coarsening and spheroidization;particle necking, coalescence, and Ostwald ripening;and dynamic equilibrium. The semi-solid process window of VW63Z alloy ranges from 620 ºC to 635 ºC, where the best process parameters are holding at 635 ºC for 20 min?30 min. The solid fraction, the average particle size, and the shape factor are 41.1%?53.8%, 81.5 μm?83.2 μm, and 0.70?0.75, respectively. The maximum relative deviations of the solid fraction, the particle size, and the shape factor at different heights of the same billet are 44.6%, 17.4%, and 16.6%, respectively, which means that it should pay attention to the uniformity of edge and core of VW63Z alloy during isothermal heat treatment. The driving force of microstructure is supposed to be the reduction of solid-liquid interface free energy.     

Integral method for calculating a turbofan engine thrust reverser jet interacting with an external stream

An integral method is proposed for calculating a jet propagating from the turbofan engine thrust reverser and interacting with a stream formed as a result of the after-landing aircraft run. The calculation results for the PS-90 engine are presented. The calculation data obtained show that the mathematical model developed adequately describes a qualitative pattern of main parameter variation in the sector jet propagating in a stream.     

Low-latitude ionospheric scintillations and total electron content obtained with the CITRIS instrument on STPSat1 using radio transmissions from DORIS ground beacons

The primary objective of the Scintillation and Tomography Receiver in Space (CITRIS) is to detect ionospheric irregularities from space at low latitude. For this purpose, the satellite receiver uses the UHF and S-Band transmissions of the ground network of Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) beacons. CITRIS, developed at the Naval Research Laboratory, differs from the normal DORIS receiver by being able to capture and store the complex amplitude of the 401.25 and 2036.25 MHz transmissions at 200 Hz sample rate. Ground processing of the CITRIS data yields total electron content (TEC) and both phase and amplitude scintillations. With CITRIS flying on the US Space Test Program (STP) satellite STPSat1, 2 years of data were collected and processed to determine the fluctuations in ionospheric TEC and radio scintillations associated with equatorial irregularities. CITRIS flights over DORIS transmitters yield direct measurements of the horizontal plasma density fluctuations associated with equatorial plasma bubbles. Future flights of CITRIS can provide valuable complements to other satellite instruments such as GPS occultation receivers used to estimate vertical electron density profiles in the ionosphere.     

基于双响应波段工作的红外热像仪测温原理与误差分析

为了提高红外热像仪测温的准确性,根据红外辐射理论,从红外热像仪的测温原理出发,分析了基于双响应工作波段的热像仪的测温原理,得出了目标物体的发射率、物体温度计算公式以及相应误差的估算公式,分析了各影响因素对热像仪测量准确度的影响,提供了一种目标物体发射率的测定方法,对利用红外热像仪准确测量内燃机等热能机械表面温度具有重要的意义。     

独立电源多智能体信息融合故障诊断方法

对独立电源系统进行故障诊断与预测研究是保证整个复杂运动装置系统安全性工程的重要环节.分析了目前独立电源故障诊断系统中存在的问题,提出采用多传感器信息融合和多智能体技术相结合的方法来提高故障诊断的可靠性和系统的扩展性.利用智能体的自主性、分布性和协作性,构建了独立电源多智能体信息融合故障诊断系统.根据独立电源故障征兆的特点,将D-S(Dempster-Shafer)证据理论引入到多神经网络的诊断结果融合技术中,阐述了多神经网络局部诊断智能体和D-S证据理论融合诊断智能体的具体实现方法.最后,以某型航空电源故障诊断为例,给出了故障实例的诊断仿真,结果表明该方法可有效提高诊断可信度.     

航空航天复合材料应用的最新进展

文章介绍了先进复合材料的最新进展情况,内容包括用于最新复合材料体系的各种增强纤维、树脂基体,及复合材料结构设计的一些新概念。重点介绍了低成本和高效的制造技术。复合材料重要结构件的制造技术在不断改进,制造出的部件不仅精度和强度更高,而且更显成本效益。文章还介绍了航空航天领域一些新研发的复合材料结构件。     

Fourier methods for turbomachinery applications

Rapid increase in computing power has made a huge difference in scales and complexities of the problems in turbomachinery that we can tackle by use of computational fluid dynamics (CFD). It is recognised, however, that there is always a need for developing efficient methods for applications to blade designs. In a design cycle, a large number of flow solutions are sought to interact iteratively or concurrently with various options, opportunities and constraints from other disciplines. This basic requirement for fast prediction methods in a multi-disciplinary design environment remains unchanged, regardless of computer speed. And it must be recognised that the multi-disciplinary nature of blading design increasingly influences outcomes of advanced gas turbine and aeroengine developments. Recently there has been considerable progress in the Fourier harmonic modelling method development for turbomachinery applications. The main driver is to develop efficient and accurate computational methodologies and working methods for prediction and analysis of unsteady effects on aerothermal performance (loading and efficiency) and aeroelasticity (blade vibration due to flutter and forced response) in turbomachinery. In this article, the developments and applications of this type of methods in the past 20 years or so are reviewed. The basic modelling assumptions and various forms of implementations for the temporal Fourier modelling approach are presented and discussed. Computational examples for realistic turbomachinery configurations/flow conditions are given to illustrate the validity and effectiveness of the approach. Although the major development has been in the temporal Fourier harmonic modelling, some recent progress in use of the spatial Fourier modelling is also described with demonstration examples.