费用约束下含应力优化的CSADT设计

恒定应力加速退化试验(CSADT,Constant Stress Accelerated Degradation Testing)方案中需要确定的变量有应力水平、各应力下样本量、监测间隔和各应力下监测次数.如何对CSADT的应力水平进行优化目前很少有人探讨.针对这一问题提出一种在费用约束下将上述4个变量进行综合优化的方法.首先用随机过程描述CSADT下产品的性能退化过程,然后以产品在使用条件下p分位寿命可靠度的渐近方差最小为目标,以试验费用不超过预算为约束条件,给出CSADT的4个优化变量,并给出应用该优化方法的仿真算例.最后,优化方案对模型参数偏差的敏感性分析表明,在一定偏差范围内优化结果具有良好的稳健性.      

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

星载单频GPS数据的电离层延迟改正方法分析

利用C/A码单点定位对LEO(Low Earth Orbit)卫星上的电离层延迟改正方法——"电离层比例因子法"进行了分析研究.计算的CHAMP卫星的轨道结果表明:采用电子密度峰值高度(hmF2,F2 region maximum electron density height)平均值和瞬时值计算的电离层比例因子α变化范围分别为0.3~0.4和0.2~0.65之间,两者最大差异可达0.3,相比较而言,hmF2瞬时值的结果更加合理,并且相应的大地高H方向的系统偏差要降低0.05~0.3m左右;与双频无电离层组合的普通单点定位结果相比表明该方法能较好地消除电离层一阶项所引入的H方向上的系统偏差;该方法适用的LEO卫星轨道高度范围大致在200~ 600km之间,当轨道高度超过700km时,该方法并不适用.     

民用飞机驾驶舱构型快速设计方法

为在方案设计阶段提高民用飞机总体方案的设计质量和形成效率,研究了民用飞机驾驶舱构型的设计措施,并在一个开放式的飞机总体设计环境中实现了这一功能.定义了飞机机身坐标系,研究了确定驾驶员设计眼位、驾驶舱布置和风挡参数化设计与模型构建的方法.建立了交互式民机驾驶舱构型二、三维快速设计环境.在此基础上,实现了驾驶舱模型的自动化调整,为总体设计阶段进行多学科设计优化奠定了基础.通过设计实例证明了该方法的有效性.     

Lambert转移中途修正的全局概率最优策略

应用Monte-Carlo法和遗传算法的联合仿真求解Lambert转移中途修正的全局概率最优策略.首先推广限制性三体问题中求解周期性特解的微分修正算法构造出考虑J₂项摄动下的Lambert转移轨道并以此作为参考轨迹,则中途修正策略仅需针对导航误差、初始偏差修正的控制偏差等进行补偿.应用微分修正算法导出的单值矩阵,设计出3类线性和非线性中途修正策略,以适应不同的精度需要.随后应用Monte-Carlo和遗传算法的联合仿真,可以得到实现代价函数(落点误差最小)在概率意义下的最优解.与直接利用优化算法寻优需要已知各种误差量不同,得到的最优修正策略更具有普适性.     

前缘吹气控制舵面流动分离

针对各种飞行器大舵偏下出现的流动分离问题,在北航D4风洞对旨在消除舵面流动分离的舵面前缘吹气技术进行了研究,为了降低控制分离所用的吹气量,吹气点设置在舵面前缘气流分离点处.应用粒子图像测速(PIV,Particle Image Velocimetry)技术,分析了舵面绕流在吹气量由小变大过程中所经历的3个不同演化阶段;由测压得到的舵面压力分布则显示,前缘吹气造成的引射作用使前缘吸力峰随吹气量增大而增大,这是前缘吹气能够使舵面升力增大的主要机理.实验结果还表明,前缘吹气可明显提高舵面升力,同时也可以显著降低舵面阻力.     

200N·m·s控制力矩陀螺用圆柱型导电环寿命试验

导电环用于200N·m·s控制力矩陀螺高速转子电信号的传输,其使用寿命直接决定了200N·m·s控制力矩陀螺整机寿命,因此需要对200N·m·s控制力矩陀螺用导电环进行加速寿命试验.对试验目的、试验对象、加速因子、试验环境、试验系统组成、失效判据进行了详细描述,对导电环寿命试验期间的电噪声、摩擦力矩、绝缘性能等测试结果进行的分析表明,在进行了4×106转的寿命试验后,导电环的各项性能指标仍能够满足200N·m·s控制力矩陀螺的使用需求.     

封闭式行星轮系功率流判别的键合图法

为更简单清晰地对封闭式行星轮系的功率流情况进行判别,利用键合图能量守恒和功率流动的特点,将键合图理论应用于该类轮系的功率流分析中.以功率汇流型、回流型2种形式的封闭式行星轮系为例,根据轮系的传动关系,利用绝对速度法建立轮系的键合图模型,根据提出的功率流向判别依据对轮系进行功率流向判别,得到整个轮系及其转换机构的功率流情况,为轮系的效率计算提供了基础.该方法适用于其它复杂轮系的功率流判别中,比传统方法更具直观性、系统性.     

基于全信息的正态分布型数据的线性回归分析

针对正态的分布型符号数据,提出一种新的线性回归分析方法.以体现正态的分布型数据的全部原始信息为出发点,给出正态的分布型变量的一阶矩、二阶原点矩、二阶混合原点矩的定义和计算原则.在此基础上,定义针对正态的分布型数据的线性回归模型以及残差信息的平方和,推导最小二乘回归系数.仿真实验证明了该方法所得回归模型在解释能力和预测能力上的有效性以及相对于"中心法"的优越性.给出的正态分布型变量数字特征的定义和计算原则为将其他经典的多元统计方法推广到分布型数据奠定了基础.