高超飞行器表面热效应地面模拟实验研究

文章深入分析高超飞行器与临近空间大气相互作用的基本物理过程,激波加热及粒子碰撞产生等离子体的物理机制,并利用磁热屏蔽效应在高超飞行器模拟器与高速定向流间建立磁化等离子体鞘层,大幅降低中性激波气体向飞行器的能流传递,从而为高超飞行器提供有效的热防护作用。通过两次比对实验验证了磁热屏蔽效应的有效性及工程实施的可行性,为今后研制高韧性、超轻质、可重复使用热防护复合材料提供了实验数据,奠定了技术基础。实验中利用层流等离子体源作为高能流密度热源是热防护实验装备上的创新,层流等离子体源能流截面大、能流密度高,可以针对高超飞行器表面热效应进行全尺寸的模拟实验。     

一种悬挂物兼容飞机航电与武器总线的设计方法

在某悬挂物作为通用系统挂装不同型号飞机时,由于不同型号飞机对该悬挂物采用航电和武器两种不同的总线通信方式,导致该悬挂物不能兼容挂载多型飞机。本文针对现有的总线应用情况,提出了一种悬挂物可兼容飞机不同总线通信方式的设计方案,并给出了方案的具体实现方法。     

开式整体叶盘四坐标插铣开槽粗加工刀位轨迹规划

提出在开式整体叶盘的粗加工阶段,采用插铣加工代替传统的五轴数控加工点铣和侧铣,实现高效加工.提出将自由曲面蜕变为直纹面,将复杂自由曲面粗加工问题转化为简单的直纹面粗加工问题.这种方法的加工效率比传统加工方法提高约60%以上.     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

PARAMETRIC MODELING OF COMPONENT LIBRARY FOR LANDING GEAR BASED ON CATIA/CAA

The design of landing gear is complicated due to the numerous considered elements.And the initial elements related to each other can also be influenced by different factors.Landing gear design often involves a very large variety of configurations,especially in the conceptual design phase.However,traditional method costs more time to complete the whole procedure for suitable configurations of landing gears.Therefore,the parametric modeling of component library for landing gear based on computer aided three-dimensional interface application/component application architecutre(CATIA/CAA)is proposed.According to the analysis of the characteristics of landing gear components,a method is presented to extract the primary parameters of landing gear components so that a systematic classification can be established.Further,the related theories and methods,including receiving geometrical parameters of the components and updating the parametrical model,displaying the component parts,are also illustrated.Finally,the development technology for component library is explained.The proposed modeling method can improve the efficiency of the whole design cycle for landing gear.     

多跨转子稳态不平衡响应研究

作者在Lund提出的有阻稳态不平衡响应计算方法的基础上,导出了多跨转子计及轴间套齿联轴器角向刚度C_hx)及C_(hy)的结点传递矩阵,结点左、右转角之间关系可表示为;     

美国航天运载系统发展动态

本文是任新民同志1987年9月在航天部推进专业会议上的讲话,主要介绍美国国家航空航天飞机计划、航天飞机Shuttle 2的设想以及美国对研制大运载系统及动力装置的一些情况。     

高模量碳纤维增强改性氰酸酯树脂基复合材料研究

采用折光指数控制法研究了改性氰酸酯树脂体系的预聚效果.结果表明:当折光指数在 1.574 5～1.578 5 时,改性氰酸酯树脂的软化点可控制在 25～30℃,室温铺覆性能良好.力学性能及耐环境性研究表明 M40/BADCy 复合材料的层间剪切强度可达到67.8 MPa.高低温交替变化及紫外线老化对 M40/BADCy 复合材料的力学性影响很小.M40/BADCy 复合材料水煮 100 h 后的吸水率小于0.94%,其层间剪切强度仅下降18%.     

苯基硅中间体对阻尼硅橡胶性能的影响

为了提高硅橡胶高温下的阻尼性能,将高苯基含量的苯基硅中间体添加到硅橡胶中,并使用硫化剂2,4-二氯过氧苯甲酰(DCLBP)与硅橡胶共硫化。通过无转子硫化仪、SEM、DMA、TG对改性硅橡胶性能进行表征。结果表明:随苯基硅中间体用量的增加,硅橡胶的硫化程度降低,硬度和拉伸强度下降,而拉断伸长率、撕裂强度和高温下的损耗因子tanδ明显提高。当添加量为15份时,硅橡胶拉伸强度为7. 75 MPa,最大损耗因子tanδmax从0. 2提高到0. 3。     

安装角对压气机叶栅气动噪声特性的影响

 基于大涡模拟(LES)和边界元方法对轴流压气机叶栅湍流流场以及流场诱导的噪声进行计算,在不同叶栅安装角下研究来流攻角和来流雷诺数对叶栅气动噪声产生、辐射的影响。研究表明:来流雷诺数不变时,同一安装角下,随着来流攻角从-5°~20°变化,叶栅监测曲线上的声压级先减小后增大,在0°来流攻角下声压级达到最小。安装角为45°时,外场总声压级随来流攻角的分布与30°安装角变化趋势相近。但安装角为60°时,总声压级的变化则明显变缓。在0°来流攻角下,总声压级比安装角为30°和45°时增加了近6 dB,但在其他正来流攻角下,变化并不明显。叶栅的最小声压值出现在弦线方向附近,安装角改变时,最小声压级出现的位置也不同。安装角不变,随着来流雷诺数的增大,叶栅表面的分离减小,损失降低。但叶栅表面的压力脉动随着来流雷诺数的增大而增大,使外场辐射噪声增加。