油气混相回流泵送密封结构开启过程试验分析

为了揭示油气混相回流泵送密封（OG-RPS）结构开启过程的动态泄漏特性和开启特性,分别进行4 种典型密封结构的开 启过程运转试验。测量记录密封开启过程的动态泄漏量,进行泄漏特性和开启特性对比分析。结果表明：OG-RPS 的泄漏率变化分为 3 个明显的阶段,分别对应密封结构开启过程的3 种状态,通过泄漏率变化可有效监测密封结构开启过程。随着线速度的增大,密 封结构未开启时泄漏率逐渐增大,泄漏率为正值;密封结构不完全开启时泄漏率逐渐减小,泄漏率为正值;密封完全开启时泄漏率 逐渐减小,泄漏率为负值。槽数为12 个、槽深为5 滋m 和槽坝比为0.7 的OG-RPS 结构密封性能和开启性能最佳。研究成果为 OG-RPS 的优化设计、理论分析验证及实际应用提供了基础,并建立了1 种基于泄漏率监控密封结构开启过程的方法。     

高超声速钝头体边界层转捩试验

为研究高超声钝头体边界层转捩以及头部钝度对转捩的影响,在FD-14和FD-14A两座激波风洞中开展了热流、压力扰动和高速纹影显示等综合测量。试验结果表明,转捩雷诺数关于钝度雷诺数的变化显示出转捩反转的趋势。压力扰动的功率谱密度（PSD）分析结果以流向离散分布云图形式显示,边界层高速纹影图像显示了第二模态波的发展、湍流的生成和熵层对边界层结构的显著影响。大头部钝度带来的强熵梯度熵层流动对边界层压力扰动频谱特性和流动结构影响显著,在转捩反转机理中起到重要作用。此外,马赫数对转捩的影响不容忽视。     

“蚌式”进气道附面层扫除特性风洞试验

以某低、高速风洞为平台,设计搭建了“蚌式”进气道附面层扫除特性测量试验系统,进行了不同流量系数和来流马赫数下进气道鼓包表面附面层扫除特性的风洞试验,通过对试验数据的整理、计算和对比分析同型号的飞行试验结果,研究了“蚌式”进气道鼓包表面附面层扫除特性。研究结果表明:在相同的来流马赫数下,随着流量系数的增大,鼓包表面附面层的扫除能力逐渐减弱;在亚声速工况的绝大多数流量范围内,鼓包表面压力系数沿鼓包中心线对称分布、压力梯度变化明显,且在不同截面沿主流方向具有增大的特征,鼓包构型对附面层扫除效果较强;超声速工况下具有明显附面层扫除能力的流量范围明显小于亚声速工况,进气道唇口形成的弓形激波是影响鼓包表面不同位置压力梯度变化的主要因素,进而决定着附面层扫除特性。在接近来流马赫数18及以上飞行工况下,附面层的扫除能力减弱,附面层分离加强,进而会造成较大的进气压力损失和畸变。     

Attitude control system of the first Russian nanosatellite <Emphasis Type="Italic">TNS-0 no. 1</Emphasis>

The results of designing the attitude control system of the first Russian nanosatellite TNS-0 no. 1 providing orientation of its longitudinal axis along the local geomagnetic field induction vector are presented. The system consists of a permanent magnet and two sets of hysteresis rods. The magnetic and geometric parameters of the magnet and rods are calculated. The influence of the permanent magnet field on the hysteresis rods and mutual influence of the rods in the case of compact satellite packaging are analyzed. Examples of calculations of transient processes and steady-state angular satellite motion are presented.     

Method of designing a neural controller for the automatic lateral control of unmanned aerial vehicles

The paper discusses a method of designing the neural controller for two-channel control of a technical object by an example of the roll and yaw control depending on deviations, velocities and accelerations of their variation.     

一种型号专用电源转换器快速检定系统的研制

阐述了依据Q/W 892A-2007《电源转换器检定规程》研制的型号专用电源转换器快速检定系统。通过研制专用拔出力检定装置和多功能智能转换开关,实现由PC机通过系统软件自动控制测试仪器进行检定以及检定结果的处理,并自动生成原始记录和证书报告。系统具有自动、智能等优点,能够实现电源转换器的快速检定。经应用,降低了劳动强度,节省了时间,提高了检定效率。     

LabWindows/CVI环境下调用Word文档的实现方法

目的介绍一种在Labwindows/CVI环境下调用Word的实现方法;方法结合具体的实例,实现对Word文档的调用;结果该方法可以按照规定的格式自动生成Word文档;结论提高了软件的效率和自动化程度。     

Mathematical modeling of plasma drifts over equatorial low latitude regions

This paper presents a mathematical model to simulate ionospheric plasma drifts at equatorial low latitude regions by coupling of E- and F-regions. The governing non-linear differential equations (of elliptic and parabolic nature) are solved numerically through finite-difference schemes and obtained neutral winds and electric fields. The temperature and electron density profiles are generated utilizing MSIS-86 atmospheric model. The continuity equation is employed to obtain night-time E-region density profile using measured ionograms at Trivandrum (India). The computed vertical and zonal plasma drifts are comparable with measured Jacamarca plasma drifts with little variations during noon and evening times. The plasma drifts at Trivandrum (8.5° N, 76.5° E, dip 0.5° N) are compared with those of Jicamarca (12° S, 76.9° W, dip 2° N). Neutral wind simulations of present model agree well with those of horizontal wind model (HWM-93). The post-sunset enhancement and its reversal are also discussed.     

Analysis of an arbitrarily loaded shell of revolution based on the finite element method in a mixed formulation

The volume finite element in the form of hexahedron with nodal unknowns as components of the displacement vector and stress tensor has been developed to analyze the shells of revolution. The displacement vector components for the inner point of the finite element and the components of its stress tensor are expressed through the nodal unknowns using the method of vector and tensor fields interpolation by the trilinear shape functions; that provides taking into account the finite element displacement as a whole solid. The variational principle in a mixed formulation is applied to form the matrix of hexahedron deformation. The efficiency of the proposed method for approximating the values being sought as vector and tensor fields in comparison with the traditional method for approximating the values being sought as scalar fields is confirmed by a numerical example.