再论和谐社会的构建——基于功能冲突论视阈

作为对二战后美国社会矛盾激化、社会动荡的回应,在对社会学家关于社会冲突的种种观点反思与发展的基础上,科塞建立了功能冲突论。科塞的功能冲突论由冲突正功能的发挥条件、冲突正功能的具体内容、社会安全阀制度等内容组成。功能冲突论启示我们,在我国构建和谐社会的过程中,要正视、分析社会矛盾、社会冲突,构建社会安全阀制度,消除社会冲突产生的社会土壤。     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

基于火箭橇的无人机碰撞民用飞机试验技术研究

无人机碰撞民用飞机关键部位损伤程度的研究是民航领域关注的新型热点问题。本文首次提出采用 火箭橇试验评估无人机碰撞民用飞机的安全性。通过对碰撞速度、碰撞位置、无人机姿态、参数测量等进行研 究,设计碰撞技术方案,论述火箭橇的设计、弹道控制设计、强度校核和测试方案,并进行试验验证和仿真计算。 结果表明:本文设计的火箭橇碰撞试验方案是可行的,实现了单一弹道上的连续多点碰撞及多视角、全覆盖、高 稳定的全过程记录;可为后续开展同类碰撞试验提供必要的技术参考,所开展的多发次碰撞试验也为无人机碰 撞民用飞机的安全性评估提供了有效的试验数据。     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

直升机旋翼桨叶的弹性碰撞动力学建模

建立了直升机旋翼桨叶弹性正碰撞的动力学模型,采用有限转动梁理论处理桨叶的弹性变形,利用Hertz接触理论处理局部弹性变形,引入位移协调方程识别弹性碰撞载荷,运用Hamilton原理建立了桨叶正碰撞的动力学方程.通过与Timoshenko算例的对比表明了该方法的正确性,且对集中质量与直升机桨叶的弹性正碰撞问题进行了研究.      

吸气式高超声速飞行器三维后体尾喷管优化设计

三维后体尾喷管是吸气式高超声速飞行器产生推力、升力的关键部件,需要精细设计,最大限度地提升三维膨胀过程中的气动特性。本文在二维后体尾喷管优化设计的基础上,发展了一种三维后体尾喷管的优化设计方法。通过参数化建模、三维喷管计算网格自动生成、空间推进CFD解算器及NSGA-II多目标优化软件等技术手段,对后体尾喷管三维构型进行了多目标优化设计。优化后的三维后体尾喷管与原始喷管相比,推力和升力都得到了较大提升。     

Gd-Tb二元稀土基非晶合金（Gd-Tb）-Al-Co的非晶形成能力及热稳定性

采用铜模铸造法制备Gd-Tb二元稀土基非晶合金(Gd-Tb)-Al-Co。确定(Gd-Tb)-Al-Co合金系的非晶形成区域及非晶形成能力。利用差示扫描量热仪对非晶合金的热稳定性以及合金的熔化和凝固过程进行研究。结果表明,Gd-Tb二元稀土基合金(Gd-Tb)-Al-Co的非晶形成能力远大于单元稀土基合金Gd-Al-Co或Tb-Al-Co的非晶形成能力。在(Gd-Tb)-Al-Co合金中,高非晶形成能力合金位于共晶点附近,非晶形成能力最好的合金(Gd0.5Tb0.5)55Al25Co20位于陡峭的液相面一侧,其临界直径(dc)可以达到5mm。与Gd55Al25Co20和Tb55Al25Co20合金相比,原子尺寸相似的Gd和Tb两个稀土元素降低相应合金的凝固温度,提高液相的稳定性,从而提高合金的非晶形成能力。     

某型导弹贮存架模态分析

基于ANSYS软件平台,在模态分析理论基础上,对某型舰载导弹贮存架结构进行了模态分析,得到了贮存架结构前十阶模态结果;着重分析了前五阶模态振型,指出了贮存架弯曲振动和扭转振动是其结构动态特性的主要表现形式;指出针对导弹贮存架结构进行的模态分析,可为贮存架结构的动力学研究工作提供基础和依据。     

关于变形网格“几何守恒律”概念的讨论

在国内外文献中应用包含有变形的动网格进行流动数值模拟时,要满足所谓的几何守恒律条件;通过对这一概念最早提出推导过程和近年来应用发展情况分析以后发现,逻辑上存在不适当之处.从流体力学基本理论出发,对包含有变形的动网格技术的理论基础进行讨论,证实几何守恒律是流体力学控制方程的伴随方程或退化方程;通过简单模型分析有限体积方法离散过程,发现计算过程中不满足几何守恒律所引起的非物理现象本质上是目前有限体积离散处理中微元体积计算方法不符合物理定律所致;因此在变形动网格计算方法中不存在必须要满足的几何守恒律.最后根据理论提出物理背景清晰的微元体积计算方法,数值验证可行.