高温超导磁悬浮助推缩比试验系统动态测试分析

基于磁悬浮助推技术概念研究方案建立了一套悬浮加速缩比试验系统.从整体缩比模型振动试验出发,主要研究悬浮质量以及悬浮刚度对整体系统动态性能的影响,并在进行缩比单元动态试验结论的基础上,建立试验模型的加速试验动态采集系统,对整体模型进行运行性能试验.在试验基础上提出了提高磁悬浮推进系统运行稳定性的依据,并据此提出相应可行的解决方案设想.通过模型加速试验并采集试验数据定性分析磁浮系统的综合运动性能,以更好地评估系统稳定特性和品质,也为进一步研究磁悬浮助推发射的气动、分离系统稳定性和可靠性提供参考.     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

7085铝合金残余应力及加工变形的数值仿真与试验

毛坯残余应力的测量以及零件的加工变形分析是航空整体结构件数控加工工艺研究的难题。应用MSC.Marc软件对某型飞机主起支撑接头的7085铝合金锻件毛坯的淬火-压缩工艺进行了数值仿真,获得了毛坯残余应力分布趋势;应用X射线衍射法与钻孔法测量了毛坯表层残余应力分布,提出了基于系数修正法的毛坯残余应力分析方法,通过最小二乘法（LSM）拟合仿真值与试验值以获得应力修正系数,并对毛坯残余应力分布的仿真结果进行修正,获得了实际毛坯的残余应力分布;由此进行了主起支撑接头缩比零件加工变形仿真与验证试验。研究结果表明：7085铝合金块状毛坯残余应力数值仿真结果与测试结果的趋势吻合,为应力修正提供了物理基础;相对于未修正的应力分布,基于修正后的应力分布仿真获得的变形结果精度提高了50%;7085-T7452铝合金的毛坯残余应力是导致主起支撑接头加工变形的主要因素。     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

航空发动机盘件径轴向裂纹底波监控超声检测方法研究

针对某航空发动机盘件中的径轴向裂纹,采用不同焦距的5MHz、10MHz聚焦探头和平探头,分别在0°,1°,2°,3°的声束入射角度下进行检测试验,通过对入射角度以及探头类型、频率、焦距等参数的优化,建立了径轴向裂纹的底波监控超声检测方法。研究发现:与垂直入射相比,小角度纵波斜入射底波监控超声检测方法可提高超声波对裂纹的敏感程度;使用焦距为89mm的10MHz聚焦探头,并使声束以2°入射角斜入射可得到最佳检测效果,试验结果与数值模拟具有良好的一致性。     

运载火箭动力冗余技术

概述了前苏联N-1火箭,美国土星系列,航天飞机以及法尔肯9运载火箭动力冗余应用情况,重点介绍了N-1火箭四次发射失利以及最终的事故原因,从现役运载火箭可靠性评估结果、运载火箭飞行故障统计结果和运载火箭动力冗余和非冗余可靠性的关系三个方面论证了动力冗余的必要性;提出了变推力方式和发动机贮备方式两种动力冗余方式,并分析了它们对运载火箭整体性能以及各系统的影响,最后梳理出实现动力冗余需要重点解决的关键技术。     

先进教练机三维工艺设计平台架构研究

沦述了航空制造业中数字化工艺设计的发展现状,分析了在三维业务需求下．当前教练机工艺设计系统所存在的问题及技术差距,并在此基础上提出了基于先进教练机平台的三维工艺设计集成系统总体构架技术方案,阐述了三维工艺设计支撑环境的构建,构建了基于数字量传递的三维工艺设计过程模型及三维工艺集成平台系统软件总体应用架构,对三维工艺设计数据库也进行了说明。     

DOA estimation and mutual coupling calibration with the SAGE algorithm

In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array output and mutual coupling coefficients, we present a novel model of the array output with the unknown mutual coupling coefficients. Based on this model, we use the space alternating generalized expectation-maximization（SAGE） algorithm to jointly estimate the DOA parameters and the mutual coupling coefficients. Unlike many existing counterparts, our method requires neither calibration sources nor initial calibration information. At the same time,our proposed method inherits the characteristics of good convergence and high estimation precision of the SAGE algorithm. By numerical experiments we demonstrate that our proposed method outperforms the existing method for DOA estimation and mutual coupling calibration.     

虚拟座舱环境头颈部sEMG采集相关肌肉研究

针对虚拟座舱环境下飞行员头部运动实时准确检测问题,在对头部运动特性进行分析的基础上,系统性地总结了人体头颈部sEMG信号采集的相关研究文献。针对头部突然旋转和俯仰运动,通过实验验证已有的sEMG信号采集方法,确定了利用sEMG信号进行头部运动检测时所需要研究的肌肉及准确的肌肉位置标识以及电极放置方法。     

粉尘气体中平面激波在固壁反射的高分辨率数值模拟

本文在稀颗粒群双流体简化模型下，采用算子分裂技术，综合应用高分辨率ＧＲＰ格式，全二阶精度的ＦＣＴ格式及预估校正格式，取三种不同粒相固壁边界条件，数值模拟了粉尘气体激波在刚性固壁上的正反射，确证了由理想平衡混合气体分析所预示的三类激波反射结构，给出了非平衡反射时波后流场的松弛特性，并评价了不同的粒相固壁边界条件假定的适用性。