半捷联位标器稳定跟踪与弹体姿态一体化控制

半捷联位标器安装在弹体上,由于寄生回路的存在,使得位标器稳定跟踪控制回路和弹体姿态控制回路产生严重耦合,影响了位标器的稳定与跟踪。针对半捷联导引头稳定平台的稳定与跟踪问题,提出了一种半捷联位标器稳定跟踪控制与弹体姿态控制的一体化方法。基于反步控制原理设计了控制律,通过合理选择反馈增益可保证系统的稳定性与动态性能。最后对一体化设计与传统分离设计进行了仿真对比。仿真结果表明：考虑位标器稳定跟踪回路与导弹姿态回路耦合的一体化控制器,不仅能够保证弹体姿态控制系统快速响应,还可以提高位标器的稳定跟踪性能,并降低位标器跟踪不上高速目标的可能性。     

空间相机热平衡试验温度预测方法改进及应用

为实现对航天器热平衡试验平衡温度的预测,建立了热平衡温度预测的方程式,对影响预测结果的各参数进行了分析。首先,由节点网络法推导出平衡温度表达式,介绍了其基于非线性最小二乘法的求解过程,建立了平衡温度的迭代方程;其次,结合大量的试验数据,对影响迭代结果的3个因素进行了统计分析,并最终确定了各因素的合理取值范围;最后,利用温度预测程序对某空间相机热平衡试验中低温工况的平衡温度进行了预测,并与试验结束后的结果进行了对比。结果表明,预测温度与试验数据的误差为±1℃（在3%之内）,满足精度要求,对热平衡温度准确的预测有效的缩短了试验时间,节省试验费用。     

单轴台的大角度姿态快速机动联合控制方法

为验证小卫星大角度姿态快速机动与高精度稳定控制能力,基于单轴气浮台硬件仿真环境,提出了一种利用推力器与飞轮组合的联合控制策略.采用相平面控制技术与有限时间控制理论设计控制器,利用推力器实现无超调的快速机动控制,利用飞轮实现有限时间内的高精度稳定控制,使单轴台在有限时间内快速高精度稳定于目标姿态.物理仿真结果表明:该方法在有限时间内完成单轴台快速稳定控制的同时,可有效避免机动过程中的超调现象,且能有效规避推力器的频繁开关与飞轮的过快饱和等问题.     

基于自动有限元建模的民机机翼结构布局优化

针对民用飞机中广泛采用的双梁式机翼结构,以机翼结构纵向构件(长桁)和横向构件(翼肋)的数量为参数生成机翼CAD模型,然后基于Patran的PCL(Patran Command Language)语言,根据整体模型分割、局部模型编号、局部网格控制、整体有限元生成的思路,实现了以纵向和横向构件的数量变化为基础自动进行机翼结构有限元模型的构建及分析,并将上述流程集成到机翼结构的布局优化中.最后参照某大型民用飞机的机翼外形尺寸建立了CAD模型,以机翼的静强度、刚度和蒙皮稳定性为约束,以机翼结构质量最低为目标,对上、下蒙皮长桁和翼肋数量进行了优化.优化后的布局使机翼结构质量降低了10.1%,表明了布局优化方法的有效性和可行性.     

显示界面字符编码工效设计与分析

针对人机显示界面中字符编码的工效设计问题,以封闭模拟驾驶舱为基础,采用32名被试开展静态模拟实验,选取反应时间和反应正确率为工效评价指标,得出不同光照水平、颜色匹配和字符高度下显示界面呈现的中文、英文、数字及符号的辨识绩效.实验结果表明:中/英文、数字和普通符号的辨识绩效差异显著;0~600 lx范围内4个水平光照变化对字符编码辨识绩效影响较小;颜色匹配方式对字符编码辨识绩效影响显著,黄/白、绿/青的字符/背景色匹配方式辨识绩效较差,在字符编码设计中尽量避免使用.通过实验结论及对实验数据的深入分析,建立显示界面字符编码设计的数学模型,为飞机驾驶舱人机显示界面编码设计提供参考.     

整机产品失效机理危害度定量分析方法

针对整机产品失效机理多而复杂、失效数据少、主失效机理分析为定性方法的现状,提出了一种基于Bayes的失效机理危害度定量分析方法.首先利用Dirichlet分布描述产品的先验信息,结合现场失效数据确定失效频率的Bayes后验分布函数,然后通过Slice抽样方法获得失效频率的满条件分布,进而利用Gibbs抽样得到其Bayes估计,从而实现了各失效机理的定量分析.最后在某型光纤连接器失效机理已分析清楚的前提下,分别用FMMEA(Failure Modes,Mechanisms and Effects Analysis)及Bayes方法确定了其主失效机理,结果表明基于Bayes的失效机理危害度定量分析方法考虑了现场未出现的失效机理危害度,其确定的主失效机理比FMMEA结果更具有可信度.     

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

民用飞机驾驶舱构型快速设计方法

为在方案设计阶段提高民用飞机总体方案的设计质量和形成效率,研究了民用飞机驾驶舱构型的设计措施,并在一个开放式的飞机总体设计环境中实现了这一功能.定义了飞机机身坐标系,研究了确定驾驶员设计眼位、驾驶舱布置和风挡参数化设计与模型构建的方法.建立了交互式民机驾驶舱构型二、三维快速设计环境.在此基础上,实现了驾驶舱模型的自动化调整,为总体设计阶段进行多学科设计优化奠定了基础.通过设计实例证明了该方法的有效性.