M46J高模量碳纤维预浸QY8911纤维束性能研究

以航空发动机应用为背景，研究了M46J／QY8911缠绕复合材料的预浸纱制备方法及性能，根据M46J特性，对现有的GB3326中纤维束力学性能测试试样的加强方式进行了改进，制作了M46J浸渍QY8911树脂的纤维束试样并测试其力学性能，同时与M46J浸渍环氧树脂的纤维束的力学性能进行比较，研究表明，不同树脂特性，不同固化工艺以及制造中所施加的张力都会影响到纤维束的纤维利用率。     

Day-to-day variability of equatorial anomaly in GPS-TEC during low solar activity period

The ionospheric total electron content (TEC) in the northern hemispheric equatorial ionization anomaly (EIA) crest region is investigated by using dual-frequency signals of the Global Positioning System (GPS) acquired from Rajkot (Geog. Lat. 22.29°N, Geog. Long. 70.74°E; Geom. Lat. 14.21°N, Geom. Long. 144.90°E), India. The day-to-day variability of EIA characteristics is examined during low solar activity period (F10.7∼83 sfu). It is found that the daily maximum TEC at EIA crest exhibits a day-to-day and strong semi-annual variability. The seasonal anomaly and equinoctial asymmetry in TEC at EIA is found non-existent and weaker, respectively. We found a moderate and positive correlation of daily magnitude of crest, Ic with daily F10.7 and EUV fluxes with a correlation coefficient of 0.43 and 0.33, respectively indicating an existence of a short-term relation between TEC at EIA and the solar radiation even during low solar activity period. The correlation of daily Ic with Dst index is also moderate (r = −0.35), whereas no correlation is found with the daily Kp index (r = 0.14) respectively. We found that the magnitude of EIA crest is moderately correlated with solar flux in all seasons except winter where it is weakly related (0.27). The magnitude of EIA crest is also found highly related with EEJ strength in spring (r = 0.69) and summer (r = 0.65) than autumn (0.5) and winter (r = 0.47), though EEJ is stronger in autumn than spring.     

Preliminary calibration results of VEGA 1 and 2 SIGMA-3 gas chromatograph

SIGMA - 3 gas chromatograph on board VEGA 1 and 2 landing probes has been operated successfully in the 60 - 50 km altitude range, providing several in - situ chemical analysis of the gas and the aerosols of Venus cloud layers. Post flight calibration required to derive atmospheric abundancies from gas chromatograms were carried out using the SIGMA - 3 spare model. A Venus atmospheric aerosol simulation chamber was used in which sulfuric acid droplets were generated. Preliminary results of these calibration experiments indicate that the concentration of sulfuric acid in the upper part of the clouds ( 60 to 55 km) is about 1 mg/m³ and suggest that an additional constituant must be present in noticeable amount in the aerosols. From these experiments the mixing ratio upper limits of SO₂ is 100 ppmV and of H₂S and COS is few 10 ppmV.     

Polish radar technology

Polish radar research and development since 1953 is reviewed, covering the development and production of surveillance radars, height finders, tracking radars, air traffic control (ATC) radars and systems, and marine and Doppler radars. Some current work, including an L-band ATC radar for enroute control, a weather channel for primary surveillance radar, signal detection in non-Gaussian clutter, adaptive MTI filters and postdetection filtering, and a basic approach to radar polarimetry, is examined.<>     

Investigations of the Mars Upper Atmosphere with ExoMars Trace Gas Orbiter

Space Science Reviews - Time measured by an ideal clock crucially depends on the gravitational potential and velocity of the clock according to general relativity. Technological advances in...     

五自由度磁悬磨头电控系统研究

研究的高速磨床电磁悬浮磨头电控系统尽量采用最新技术，在保证系统 性能的前提下降低了系统造价。在该系统中采用TMS320F240 DSP芯片作为控制核心，同时控制磁悬浮轴承的悬浮和变频电机调速，采用运行效率很高的汇编语言编写控制软件，其中磁悬浮轴承是PID控制算法，电机调速为SPWM方式。磁悬浮轴承PWM功率放大器中采用能简化驱动的新型半桥电路，电机调速主电路中采用智能功率模块（IPM）。动态刚度测试和高速运转实验表明，该电控系统满足高速磨床电磁悬浮磨头的控制要求。     

Simulation of the flow around a stationary circular cylinder taking into account laminar-turbulent transition

We consider a problem of a stationary incompressible viscous fluid flow around a flat circular cylinder. In the vicinity of the critical Reynolds number Re _cr a stepwise drop of the cylinder drag takes place, which is called the drag crisis.     

Solid nanomembrane manufacture using ion-plasma action

A process of manufacture of porous membranes made of aluminum foil (Al 99.99%) by the method of electrochemical anodic oxidation followed by a continuous barrier layer removal with ion-plasma irradiation is described. The membranes having a 8 mm diameter made from AL2O3 with a thickness from 2 to 5 microns thick with a regular channel arrangement are obtained. A possibility to change the channel diameter in the range of 20?C100 nm by adjusting voltage and temperature during the oxidation is shown. We present the experimental dependencies of aluminum and aluminum oxide sputtering coefficients on the energy and incidence angle of xenon ions within the energy range of 100??400 eV.     

Subgravity states: key to understanding the role of terrestrial gravity in human behaviour

The early orbital flights, although undertaken with considerable confidence, involved some uncertainty because of the impossibility of simulating under terrestrial conditions all of the conditions encountered in space. However, space-flight achievements by both the American astronauts and Soviet cosmonauts have firmly established that man, if appropriately selected, trained, and protected by suitable life-support systems, can perform efficiently for long periods of time in the hostile environment of space. We know that the side effects of vestibular origin pose important problems in space exploration, and the neurophysiological effects of any extensive, rapid adaptation processes in subgravity states have enabled a better understanding of man's compensatory capabilities. With the successful establishment of orbiting research laboratories, an unparalleled opportunity exists that will undoubtedly enable better understanding of the role played by gravity in normal terrestrial activity, not only as it affects our vestibular physiology, but also as it may or may not concern other systems and at different organizational levels in the body.     

A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.