Chaotic zero dynamics in kinematically redundant robots

The authors attempt to integrate two areas in robotics that are maturing rapidly: the control of kinematically redundant rigid robots and feedback linearization. Kinematically redundant robots have several advantages over nonredundant robot arms. The extra degrees of freedom are used to reach around or between obstacles. Unlike nonredundant rigid link robots that do not exhibit zero dynamics, the self motions of kinematically redundant robots can be used for torque optimization or avoiding obstacles. It is shown that induced self motions can be chaotic. The main contribution is to demonstrate chaos in cases of feedback linearization when the decoupling matrix is nonsquare and there are less outputs than inputs     

An optimum filter for direct A/D conversion

The author describes a design procedure to find the optimum finite-impulse-response (FIR) filter coefficients when the characteristics of the bandpass filter preceding the analog-to-digital (A/D) converter are known. A simulation of direct A/D conversion performance shows the improvement over the filter coefficients designed to minimize the maximum error over a specified band of frequencies. DC cancellation may be added to the process with very little change in the coefficients of the optimum FIR filter or its performance.<>     

Optical observations of the X-ray source 2S0921-630

We report photometric observations of the optical counterpart of the X-ray source 2S0921-630. The data, obtained at the South African Astronomical Observatory during 3 weeks in 1980 and 1981, are consistent with a 17.9 day periodic modulation of the flux in the B band. Correlated variability of the (B-V) and (U-B) colour indices with the B mag. is demonstrated and quantified. The observed B mag. and colours at maximum and minimum light are used to compute some of the system parameters. A model of 2S0921-630 is proposed in terms of a binary system in which the variable inclination of a luminous accretion disc produces the long-term modulation of the optical flux.     

The Effect of Differential Time Delays in the LMS Feedback Loop

The effect of differential time delay in the feedback loops of an LMS adaptive array is examined. Differential time delay is shown to have two effects on array performance. First, it causes the weights to oscillate during weight transients. Second, it degrades the output signal-to-interference-plus-noise ratio (SINR) from the array. Weight oscillation occurs when the phase shifts in the LMS loop are not matched at the signal carrier frequency. SINR degradation depends on signal bandwidth: the wider the bandwidth, the larger the degradation.     

Three Mile Island? Lessons for America

The great fear of a nuclear castastrophe is the prime lesson learned from the Three Mile Island accident. This fear is real and creates a major risk to our society. Although the probability of a major release of radioactivity occurring at a given plant in a given year is low, the rapidly increasin number of plants around the world increases the probability that such a catastrophe will occur someplace in the next few years. When a major release does occur, people will demand an end to the use of energy from nuclear power. We are at grave risk in not having an alternative, in not providing a choice in time. The alternatives are clearly defined. But we need to see that the resources are made available to develop them.     

Gravity Sensors and the Principle of Equivalence

The tensor characteristics of the inertial fields created by acceleration and rotation, and the gravitational fields created by masses are discussed. Although it is sometimes thought that it is impossible to distinguish between gravitational and inertial effects because of Einstein's principle of equivalence, these effects do have different, detectable tensor characteristics. The principle of equivalence is only strictly applicable at a point, while the instruments to measure these tensor fields exist over a finite region. The inertial field created by acceleration is a uniform vector field and has no gradients, while the inertial field created by rotation has a uniform cylindrically symmetric tensor gradient but none of higher order. The gravitational field created by a mass is highly nonuniform with essentially no limit to the number of higher order gradients. These differences make it theoretically possible to independently measure gravitation, rotation, and acceleration effects; to do so, some form of differential force sensor with tensor response characteristics must be used. The standard technique is static, using differential accelerometers to sense the spatial gradient characteristics of the fields. A more promising technique is dynamic; by rotation of the differential sensor, the static spatial variations are transformed into temporal variations with various frequency components. It is then possible to distinguish between the various fields by frequency filtering.     

Adaptive False Alarmrm Regulation in Double Threshold Radar Detection

In practical situations the false alarm probability in double threshold radar detection, sometimes known as binary integration with sliding window detection, is dependent on the nonstationarity and azimuthal correlation of the clutter which is present. Control of the false alarm probability can be achieved, to a certain extent, by the adjustment of the second threshold in the detection process. In this study two adaptive control techniques which are based on the statistical characteristics of the data are compared. Comparing the results for a technique based on first-order statistics with one based on second-order statistics, it is shown that the second-order, or correlation sensitive, technique can give a reduction of 30 to 45 percent in the false alarm probability with no corresponding loss in the detection probability. An interesting aspect of the results is the fact that the effects of the size of the sample area and the bias in the correlation estimator are clearly evident.     

Susceptibility of DS/FH,M, Binary DPSK to Partial and Full Band Barrage Jamming

Spread spectrum signaling schemes have been proposed to counter unfriendly, electrical jamming threats. In order to establish their effectiveness, such schemes must be analyzed. This work takes a step in this direction by developing the susceptibility equation, or equivalently, the probability of error, of a direct sequence/frequency hopped (DS/FH), binary differential phase-shift keying (DPSK) system when subjected to a barrage jamming signal. Specific system models are established for the receiving system as well as for the jamming signal and the spread spectrum techniques. Both partial and full band jamming strategies are considered. Graphical results are presented with the conclusions summarizing the spread spectrum effectiveness and the deficiencies of the FH processing gain definition.     

Current Injected Equivalent Circuit Approach to Modeling Switching DC-DC Converters

A new current injected equivalent circuit approach (CIECA) to modeling switching dc-dc converter power stages is developed, which starts with the current injected approach and results in either a set of equations which completely describe input and out-put properties or an equivalent linear circuit model valid at small signal, low frequency levels. This approach to modeling switching dc-dc converter power stages has the merits but not the demerits of both the electronic equivalent circuit state space average approach and the current injected control type approach, namely, 1) the modeling is very clear and is simple whether the converter operates in continuous or discontinuous inductor conduction modes, 2) the modeling results in an equivalent circuit which is very close to the actual converter, and 3) the equivalent circuit can be used directly in the computer for theoretical predictions like SPICE, etc.     

An Overview of the Fast Auroral SnapshoT (FAST) Satellite

The FAST satellite is a highly sophisticated scientific satellite designed to carry out in situ measurements of acceleration physics and related plasma processes associated with the Earth's aurora. Initiated and conceptualized by scientists at the University of California at Berkeley, this satellite is the second of NASA's Small Explorer Satellite program designed to carry out small, highly focused, scientific investigations. FAST was launched on August 21, 1996 into a high inclination (83°) elliptical orbit with apogee and perigee altitudes of 4175 km and 350 km, respectively. The spacecraft design was tailored to take high-resolution data samples (or `snapshots') only while it crosses the auroral zones, which are latitudinally narrow sectors that encircle the polar regions of the Earth. The scientific instruments include energetic electron and ion electrostatic analyzers, an energetic ion instrument that distinguishes ion mass, and vector DC and wave electric and magnetic field instruments. A state-of-the-art flight computer (or instrument data processing unit) includes programmable processors that trigger the burst data collection when interesting physical phenomena are encountered and stores these data in a 1 Gbit solid-state memory for telemetry to the Earth at later times. The spacecraft incorporates a light, efficient, and highly innovative design, which blends proven sub-system concepts with the overall scientific instrument and mission requirements. The result is a new breed of space physics mission that gathers unprecedented fields and particles observations that are continuous and uninterrupted by spin effects. In this and other ways, the FAST mission represents a dramatic advance over previous auroral satellites. This paper describes the overall FAST mission, including a discussion of the spacecraft design parameters and philosophy, the FAST orbit, instrument and data acquisition systems, and mission operations.