金属载体上线天线阻抗与辐射特性的矩量法研究

用线网格模拟金属载体表面，应用矩量法求出天线及载体网格上的电流分布，据此研究在该金属载体影响下的天线特性，在计算阻抗矩阵元素时，利用了非对称正弦偶极子辐射场的精确表达式，并采用了直接复数积分，简化了计算公式，本文给出了几种金属载体上线天线的阻抗与辐射特性的计算结果，它们与有关文献上的数据或实验结果一致，最后计算了一种舰船简单模型上两根线天线的远区辐射场及它们的自阻抗与互阻抗。     

飞机穿越微下击暴流风切变的智能控制

在应用模糊逻辑建模与辨识方法建立微下击暴流风切变模型的基础上，根据恒定俯仰姿态改出微下击暴流的飞行引导策略，提出了一种改出微下击暴流风切变的模糊反馈控制系统，并将遗传算法应用于该模糊逻辑控制器的设计。结果表明，本文提出的建模方法能够更真实地反映出飞机穿越微下击暴流风场的动态特性；采用模糊逻辑控制器，可使得飞机在穿越微下击暴流风场时具有较好的改出性能；另外，遗传算法的应用对已设计的模糊逻辑控制器进行了优化，进一步改善了飞机穿越微下击暴流的性能。     

基于批生产的逐段式车间作业调度算法

探讨了离散作业型（Job shop）车间中的作业调度的分阶段模型，并根据离散作业调度的阶段性提出了基于作业状态空间的逐段式车间作业调度算法，通过对一个实际车间作业调度仿真比较，此算法运算速度比最短加工时间（SPT）和最少工作量剩余（LWR）算法快，其调度结果在实际作业车间具有可执行性。     

一种新颖组合变换器拓扑研究与应用

基于电源模块并联和串联的思想，提出了一种新颖双管正激组合变换器拓扑，克服了双管正激变换器副边二极管电压应力过高，输出电压和电流脉动大，只能应用于输出中低压场合的缺点，具有副边二极管电压应力低，可靠性高，原边开关管电流应力低，输出电压和电流脉动小，磁芯元件体积小等优点，本文对该新颖组合变换器进行分析，仿真和实验，表明适合应用于输入中，高电压，输出高压，大电流场合，并成功应用于某型飞机6KVA逆变器前级变换器，各项技术指标均符合设计要求。     

加权电压控制多路输出正激变换器的研究

研究了一种经济实用的多路输出DC／DC变换器的输出电压控制方法－加权电压控制，该方法可有效地改善多路输出变换器输出的稳态稳压精度和动态响应性能，对应用加权电压控制的两路输出正激变换器进行直流稳态分析，得出直流稳态等效电路模型和输出电路压数学表达式，分析了加权因子对输出电压的影响，给出了设计加权因子的原则和设计方法，通过样机实验，验证了该方法能够较好地实现多路输出稳压指标。     

快速可重构信息系统的框架研究(英文)

变化和重构是快速可重构信息系统 (RRIS)的两个核心概念 ,RRIS对变化的适应或演化能力使它优于传统信息系统。本文首先提出 RRIS的体系结构 ,然后以 RRIS框架为重点 ,讨论框架的定义、分类及设计 ,研究框架的构成、构成元素 (业务构件 )的设计及构件如何在构架的组织下协调地安插在 CORBA的软总线上 ,实现类似硬件IC的即插即用。构件在框架上即插即用的灵活机制及热点构件 (反映变化 )的灵活运用 ,提高了框架的可扩展性、可定制性 ,从而提高了 RRIS适应变化的可重构性。     

Auxin polar transport in Arabidopsis under simulated microgravity conditions — Relevance to growth and development

Activity of auxin polar transport in inflorescence axes of Arabidopsis thaliana grown under simulated microgravity conditions was studied in relation to the growth and development. Seeds were germinated and allowed to grow on an agar medium in test tubes on a horizontal clinostat. Horizontal clinostat rotation substantially reduced the growth of inflorescence axes and the productivity of seeds of Arabidopsis thaliana (ecotypes Landsberg erecta and Columbia), although it little affected seed germination, development of rosette leaves and flowering. The activity of auxin polar transport in inflorescence axes decreased when Arabidopsis plants were grown on a horizontal clinostat from germination stage, being ca. 60% of 1 g control. On the other hand, the auxin polar transport in inflorescence axes of Arabidopsis grown in 1 g conditions was not affected when the segments were exposed to various gravistimuli, including 3-dimensional clinorotation, during transport experiments. Pin-formed mutant of Arabidopsis, having a unique structure of the inflorescence axis with no flower and extremely low levels of the activity of auxin polar transport in inflorescence axes and endogenous auxin, did not continue its vegetative growth under clinostat rotation. These facts suggest that the development of the system of auxin polar transport in Arabidopsis is affected by microgravity, resulting in the inhibition of growth and development, especially during reproductive growth.     

Spaceflight experiments with Arabidopsis starch-deficient mutants support a statolith-based model for graviperception.

In order to help resolve some of the controversy associated with ground-based research that has supported the starch-statolith theory of gravity perception in plants, we performed spaceflight experiments with Arabidopsis in Biorack during the January 1997 and May 1997 missions of the Space Shuttle. Seedlings of wild-type (WT) Arabidopsis, two reduced-starch strains, and a starchless mutant were grown in microgravity and then were given either a 30, 60, or 90 minute gravity stimulus on a centrifuge. By the 90 min 1-g stimulus, the WT exhibited the greatest magnitude of curvature and the starchless mutant exhibited the smallest curvature while the two reduced starch mutants had an intermediate magnitude of curvature. In addition, space-grown plants had two structural features that distinguished them from the controls: a greater number of root hairs and an anomalous hypocotyl hook structure. However, the morphological changes observed in the flight seedlings are likely to be due to the effects of ethylene present in the spacecraft. (Additional ground-based studies demonstrated that this level of ethylene did not significantly affect gravitropism nor did it affect the relative gravitropic sensitivity among the four strains.) Nevertheless, this experiment on gravitropism was performed the "right way" in that brief gravitational stimuli were provided, and the seedlings were allowed to express the response without further gravity stimuli. Our spaceflight results support previous ground-based studies of these and other mutants since increasing amounts of starch correlated positively with increasing sensitivity to gravity.     

提高电铸局部电沉积速率试验研究

电铸成型是采用离子沉积的方法制造复制件，具有很好的复制精度，因此电铸技术得到了广泛的应用。但由于受极限电流密度等多方面因素的影响，电铸速率一直是制约电铸技术发展的一个瓶颈，许多学者为此做了大量的理论和试验研究，但对如何提高极限电流密度还没有提供一个比较满意的答案，为提高电铸局部电沉积速率，本文在前人工作的基础上，讨论了影响电铸速率的因素，提出了一种新型的电铸方法－喷射式电铸，并通过两组试验分析了局部电沉积速率怀电铸液流量的关系以及局部铸速率与喷嘴口径的关系，试验结果表明，采用喷射式电铸可以大大提高局部极限电流密度，从而使电铸局部电沉积速率有一个较大范围的提高，为将电铸与快速成型结合奠定了试验基础。