CCRS C/X-airborne synthetic aperture radar: An Rand D tool for the ERS-1 time frame

The airborne synthetic-aperture radar (SAR) system developed for the Canada Centre for Remote Sensing (CCRS) is described. It consists of two radars, at C-band and X-band. Each radar incorporates the following features: dual-channel receivers and dual-polarized antennas; a high quality, 7-look, real-time processor; a sensitivity time control for range-dependent gain control; a motion-compensation system for antenna steering in azimuth and elevation; and baseband I and Q signal phase rotation. The system also uses a high-power transmitter with a low-power back-up. The SAR maps to either side of the aircraft, at high or low resolution, at incidence angles which in high resolution span 0° to 80°. Radar operating parameters, data products, key specifications and the motion compensation scheme used are presented. Properties of the real-time imagery are discussed and examples of C-band SAR data in the three operating modes are given     

Identification of specific gravity sensitive signal transduction pathways in human A431 carcinoma cells.

Epidermal growth factor (EGF) activates a well characterized signal transduction cascade in human A431 epidermoid carcinoma cells. The influence of gravity on EGF-induced EGF-receptor clustering and early gene expression as well as on actin polymerization and actin organization have been investigated. Different signalling pathways induced by the agents TPA, forskolin and A23187 that activate gene expression were tested for sensitivity to gravity. EGF-induced c-fos and c-jun expression were decreased in microgravity. However, constitutive beta-2 microglobulin expression remained unaltered. Under simulated weightlessness conditions EGF- and TPA-induced c-fos expression was decreased, while forskolin- and A23187-induced c-fos expression was independent of the gravity conditions. These results suggest that gravity affects specific signalling pathways. Preliminary results indicate the EGF-induced EGF-receptor clustering remained unaltered irrespective of the gravity conditions. Furthermore, the relative filamentous actin content of steady state A431 cells was enhanced under microgravity conditions and actin filament organization was altered. Under simulated weightlessness actin filament organization in steady state cells as well as in EGF-treated cells was altered as compared to the 1 G reference experiment. Interestingly the microtubule and keratin organization in untreated cells showed no difference with the normal gravity samples. This indicates that gravity may affect specific components of the signal transduction circuitry.     

Marangoni convection in a liquid layer under the simultaneous action of a transverse magnetic field and rotation

Asymptotic stability characteristics with respect to the onset of Marangoni convection in a liquid layer under the simultaneous action of a large transverse magnetic field and a large rate of rotation are investigated. In certain parameter ranges there is a decrease in critical Marangoni number for increasing magnetic field and rotation depending on the coupling between interfacial perturbations and rotation.     

A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

Vertical profiles of halocarbons in the stratosphere

Stratospheric air samples collected between 10 and 35 km altitude my means of a cryogenic sampler were analyzed by gaschromatography. Thus vertical profiles of source gases for halogen radicals were derived, such as CCl₄, CCl₃F, CCl₂F₂, CClF₃, CF₄, C₂F₃Cl₃, C₂F₄Cl₂, C₂F₅Cl, C₂F₆, CH₃Cl, CH₃CCl₃, CHF₂Cl, CH₃Br, CBrF₃, and CBrCl₂F. Systematic discrepancies between measured and modelled halocarbon profiles point to deficiencies of present one- and two-dimensional models. Measurements of fully halogenated hydrocarbons provide a tool for systematically studying these deficiencies and thus improving the models.     

Gravitational influence on binary alloy melt equilibria

Micro- and macrosegregation, the nonuniform redistribution of solute during solidification, are common to both casting and welding, processes of fundamental importance in materials engineering. In multicomponent crystal growth where solid/liquid density differences are appreciable gravity-induced separation can lead to significant spatial variations in resulting ingot composition. In fact, this phenomenon is also operative in liquid/liquid systems such as monotectic alloys exhibiting a liquid miscibility gap, where buoyancy-driven flows can result in a sometimes unwanted separation of phases upon cooling through the miscibility dome.     

Thermocapillary migration of bubbles and droplets

The migration of a droplet in a large liquid body possessing a uniform temperature gradient is analyzed in the creeping flow limit for small values of the Marangoni number (ε). The method of matched asymptotic expansions is used for the solution of the field equations. The migration velocity is calculated to 0(ε²) and the result reduces to that of Young, Goldstein and Block [10] in the limit of zero Marangoni number.     

Electromagnetic containerless undercooling facility and experiments for the shuttle

An electromagnetic furnace is being prepared for flights aboard the space shuttle. This apparatus is capable of melting metals and alloys up to 1400°C melting point by induction heating with subsequent solidification of the freely levitated melt without contact with any container. The solidification can be carried out with greatly reduced fields resulting in minimal heating and stirring of the free melt. Sequential specimens can be processed during flight. Several experiments are planned for a series of flights, beginning in 1985 with an undercooling experiment on NiSn alloys. These will be interspersed with detailed studies of fluid flow caused by low and high field levels in order to quantify the corresponding effect upon the solidification process.     

Radio aurora magnetic and streaming aspect sensitivities on 6 simultaneous links at 50 MHz

During August 1981, a 50 MHz c.w. radar system was operated in central Canada to measure auroral scatter amplitudes and Doppler spectra from a scattering region centered near 66° magnetic invariant latitude (L ≈ 6.0). Narrow beams from 3 transmitters, differing in frequency by 1 KHz, were directed to cover a common volume of the ionosphere over a ground location at 56.3°N, 103.5°W. The scattered signals were received on narrow beam antennas at two receiving sites, and recorded in analog form on magnetic tape under the control of an AIM65 microcomputer. The analog tapes were digitized later and FFT-processed to obtain Doppler spectra and amplitudes.The 6 transmission paths were designed to provide several magnetic aspect angles varying by 1.5°-7° from perpendicularity with the earth's field B and two streaming aspect angles differing by ～38°. The objective was to employ controlled geometric factors to study the functional dependency of signal amplitudes and Doppler shifts on magnetic and streaming aspect angles. Several hundred hours of excellent data were obtained in continuous operation during the month of August 1981. Preliminary results will be reported.