Analysis of shells of revolution under axisymmetrical loading using the quadrature method

To complete study [1], the procedure of applying the numerical quadrature method to analyzing the shells of revolution under axisymmetrical loading is presented.     

Improvement of conventional combustion chamber structure in order to enhance GTE ecological indicators

The test results of a conventional combustion chamber with the improved structure are presented. The concentration of toxic substance emissions is reduced as compared with combustion chambers of the similar type.     

Simulation of helicopter motion in unsteady conditions

To calculate the unsteady helicopter motion, we propose a simplifying approach consisting in the fact that the numerical solution of equations of nonlinear nonstationary aerodynamics and flight dynamics are made successively in time intervals. As an example, the results of calculating the helicopter motion in descent are presented. The mathematical model and algorithm can be used for calculating the unsteady motion of different helicopters.     

Integration and calibration of a multi slit spectropolarimeter

Multi-slit spectropolarimeter is a next-generation spectropolarimeter to obtain vector magnetic field information at high spatial, spectral, and temporal resolution for studying the magnetic structures on the Sun. Once developed, it can be used as ground based instrument at solar observatories, also as a space payload for various solar missions. A high spectral resolution is invariably an important parameter for accurate vector magnetic field measurements and faster cadence is required for the study of dynamical evolution of structures (e.g., solar flares, sunspots etc.) on the Sun and hence better understanding on the physics behind their evolution.     

DORIS geodesy: A dynamic determination of geocentre location

Geoscience Australia contributed a multi-satellite, multi-year weekly time series to the International DORIS Service combined submission for the construction of International Terrestrial Reference Frame 2008 (ITRF2008). This contributing solution was extended to a study of the capability of DORIS to dynamically estimate the variation in the geocentre location. Two solutions, comprising different constraint configurations of the tracking network, were undertaken. The respective DORIS satellite orbit solutions (SPOT-2, SPOT-4, SPOT-5 and Envisat) were verified and validated by comparison with those produced at the Goddard Space Flight Center (GSFC), DORIS Analysis Centre, for computational consistency and standards. In addition, in the case of Envisat, the trajectories from the GA determined SLR and DORIS orbits were compared. The results for weekly dynamic geocentre estimates from the two constraint configurations were benchmarked against the geometric geocentre estimates from the IDS-2 combined solution. This established that DORIS is capable of determining the dynamic geocentre variation by estimating the degree one spherical harmonic coefficients of the Earth’s gravity potential. It was established that constrained configurations produced similar results for the geocentre location and consequently similar annual amplitudes. For the minimally constrained configuration Greenbelt–Kitab, the mean of the uncertainties of the geocentre location were 2.3, 2.3 and 7.6 mm and RMS of the mean uncertainties were 1.9, 1.2 and 3.5 mm for the X, Y and Z components, respectively. For GA_IDS-2_Datum constrained configuration, the mean of the uncertainties of the geocentre location were 1.7, 1.7 and 6.2 mm and RMS of the mean uncertainties were 0.9, 0.7 and 2.9 mm for the X, Y and Z components, respectively. The mean of the differences of the two DORIS dynamic geocentre solutions with respect to the IDS-2 combination were 1.6, 4.0 and 5.1 mm with an RMS of the mean 21.2, 14.0 and 31.5 mm for the Greenbelt–Kitab configuration and 4.1, 3.9 and 4.3 mm with an RMS 8.1, 9.0 and 28.6 mm for the GA_IDS-2_Datum constraint configuration. The annual amplitudes for each component were estimated to be 5.3, 10.8 and 11.0 mm for the Greenbelt–Kitab configuration and 5.3, 9.3 and 9.4 mm for the GA_IDS-2_Datum constraint configuration. The two DORIS determined dynamic geocentre solutions were compared to the SLR determined dynamic solution (which was determined from the same process of the GA contribution to the ITRF2008 ILRS combination) gave mean differences of 3.3, −4.7 and 2.5 mm with an RMS of 20.7, 17.5 and 28.0 mm for the X, Y and Z components, respectively for the Greenbelt–Kitab configuration and 1.1, −5.4 and 4.4 mm with an RMS of 9.7, 13.3 and 24.9 mm for the GA_IDS-2_Datum configuration. The larger variability is reflected in the respective amplitudes. As a comparison, the annual amplitudes of the SLR determined dynamic geocentre are 0.9, 1.0 and 6.8 mm in the X, Y and Z components. The results from this study indicate that there is potential to achieve precise dynamically determined geocentre from DORIS.     

Numerical modeling of large elastoplastic strains in terms of principal stretches. II. Physical relations,calculation algorithm

The constitutive relations and plastic flow rule are derived from the thermodynamics equations. The known procedures of determining the plastic strain rate value are described. A calculation algorithm is presented that is based on the incremental loading, linearization of the virtual power equation and the projection method. A numerical example is presented.     

Intensification of heat exchange on the convex surface of an annular channel with continuous flow swirling

In this paper, the results of an experimental study concerning average heat transfer in an annular channel with flow swirling by an endless screw and spherical grooves on the convex surface are presented. Also analyzed is the heat and hydraulic efficiency of grooves application under conditions being considered.     

Testing for Year 2000 readiness: technical and management issues

The approach of the Year 2000 (Y2K) has called into question the condition of readiness of computer systems upon which organizations depend. Will these systems operate reliably after midnight, January 1, 2000, or will problems associated with date calculations cause failures that adversely affect users? This question has caused organizations to identify their critical systems, test these systems for Y2K problems, and take corrective action where necessary to ensure Y2K readiness. This paper examines various technical and management issues that Southwest Research Institute has dealt with in solving these problems     

Considerations for the Short-Term Stability of Frequency Multipliers

The effects of frequency multiplication circuits on the short-term stability of an oscillator system are analyzed. The short-term stability of real components such as varactor multipliers are compared to the short-term stability of an ?ideal? frequency multiplier which maintains the stability of the basic oscillator. In addition, it is shown that positive feedback like that used in a synchronized oscillator, while useful for tracking, degrades short-term stability.     

High temperature alters the growth reaction of Pottia protonemata.

Under gravistimulation, dark-grown protonemata of Pottia intermedia revealed negative gravitropism with a growth rate of approximately 28 μm·h⁻¹ at room temperature (20 °C). In 7 days, the protonema formed a bundle of vertically oriented filaments. At an elevated temperature (30 °C), bundles of vertically growing filaments were also formed. However, both filament growth rate and amplitude of the gravicurvature were reduced. Red light (RL) irradiation induced a positive phototropism of most apical protonemal cells at 20 °C. In a following period of darkness, approximately two-thirds of such cells began to grow upward again, recovering their negative gravitropism. RL irradiation at the elevated temperature caused a partial increase in the number of protonemal cells with negative phototropism, but the protonemata did not exhibit negative gravitropism after transfer to darkness. The negative gravitropic reaction was renewed only when protonemata were placed at 20 °C. A dramatic decrease in starch amount in protonemal apical cells, which are sensitive to both gravity and light, occurred at the higher temperature. Such a decrease may be one of the reasons for the inhibition of the protonemal gravireaction at the higher temperature. The observation has a bearing on the starch-statolith theory.