Ambiguity Functions for Quadratic Phase-Coded Pulse Trains

The matched filter ambiguity function is presented for a burst waveform composed of repeated subbursts, each one of which consists of N pulses in which the phase is varied quadratically from pulse to pulse. The resulting ambiguity function exhibits small residual ambiguities along the delay axis separated by the reciprocal of the pulse repetition frequency (PRF). A cross-ambiguity function is derived which reduces these ambiguities to zero amplitude. A third cross-ambiguity function is presented for a receiver matched to a generalized Hamming weighted repeated quadratic burst. The location in the delay/Doppler plane of the waveform ambiguities for these waveforms is compared with that of an uncoded pulse burst.     

Real-time stereoscopic applications using the goes operational satellites

We have investigated the use of real and synthetic stereo satellite images and stereo graphics in applications such as cloud-tracked winds, severe storm cloud analysis, and general meteorological interpretation. We have concluded that a stereo meteorological presentation is possible and desirable in an operational environment. Synthetic stereo could be used immediately in cloud-tracked wind operations. The presentation allows one to appreciate the interrelations between cloud motions and cloud structures, especially in multi-layered situations. Reprocessing of FGGE tropical wind sets with a synthetic stereo presentation showed some improved yields of low-level vectors, a significant increase in mid-level vectors, and very little change in the high-level vectors. Severe local storm real-stereo presentations are possible operationally because the 15 minute RISOP operations of GOES-East allow simultaneous scanning of both geosynchronous satellites twice per hour. The real-stereo height measurements of overshooting turrets are an improvement over infrared heights and can be used to monitor the strength of the thunderstorm updraft. Synthetic stereo presentations of thunderstorm tops can be presented in a non-linear fashion which stretches out the cloud top features. The synthetic stereo presentation is easier for most people to see. We recommend the use of a hybrid system where the viewing is done on the synthetic stereo image and the quantitative measurements are done on the real-stereo pairs.     

The sensitivity of the earth's radiation budget to changes in cloudiness

Cloudiness modulates the radiation budget at the top of the Earth-atmosphere system. For radiation balance studies, for climate diagnostic studies, and for climate modeling studies, it is important to know the sensitivity of both the outgoing longwave radiation and the net (absorbed solar minus outgoing longwave) radiation of the system to changes in cloudiness on a global basis. Based on a 45 month series of NOAA satellite scanning radiometer observations, estimates of the global distribution of these sensitivity parameters are obtained.     

On the generation of satellite position (and velocity) by a mixed analytical-numerical procedure

The generation of accurate Earth-satellite ephemerides by numerical integration, over a period of perhaps weeks, can consume an inordinate amount of computer time. No satisfactory purely analytical procedure exists, but if short-period components of the standard elliptic elements are removed analytically, the resulting mean elements can be integrated with a step time that is longer than the satellite's orbital period.The definition of the mean elements depends on the particular perturbations included in the orbit generator and regarded as non-resonant. It is best if short-period perturbations are not applied to the orbital elements themselves but to the satellite's position (and velocity if required), expressed in a system of cylindrical polar coordinates, and the paper shows how mean elements can be recovered from position and velocity.A computer program has been written to test the proposed procedure for generating ephemerides, using a truncated potential field. Some results from this program are presented.     

Comparative economics of very high capacity communications satellites

Technology advances expected by the late 1980 or early 1990 time period will allow the construction of powerful and complex communications satellites with large multibeam antennas and very many transponders, and their operation and maintenance in geostationary orbit. The high sensitivity and effective radiated power of such satellites will enable the Earth stations using them to shrink dramatically in size and cost, thus becoming readily available to very large numbers of users as well as making possible new kinds and levels of communications services simply not possible with smaller satellites. This paper briefly describes three such new designs, concerning electronic mail transmission, educational TV distribution, and mass personal communications; it compares the users' service costs with those of terrestrial networks designed for the same performance.     

Lightweight (AlGaAs)GaAs/CuInSe2 tandem junction solarcells for space applications

Mechanically stacked tandem cells consisting of GaAs thin-film upper cells and CuInSe₂ thin-film lower cells have been developed to meet the increasing power needs projected for future spacecraft. The authors report the fabrication of the first highly efficient lightweight GaAs/CuInSe₂ tandem cell on a 2-mil thick substrate, update recent performance improvements in thin-film GaAs/CuInSe₂ tandem cells, and discuss their application to space power systems. The efficiency of 4-cm² cells has improved to 21.6% AM0, the highest ever reported for a thin-film photovoltaic cell. Lightweight 4-cm² tandem cells have been successfully fabricated with efficiencies as high as 20.8%. These cells weighed about 180 mg without optimized substrate trimming. Radiation and operating temperature effects on GaAs/CuInSe₂ tandem cells are also discussed, and an interconnect scheme to form a voltage-matched string is described     

Simulation of DC spacecraft power systems

A modular state-variable approach is presented for DC spacecraft power system modeling and simulation. Each modular component is treated as a multiport network, and a state model is written with the port voltages as the inputs. The state model of a component is solved independently of the other components, using its state transition matrix. The state variables of each component are updated, assuming that the inputs are constant. Network analysis principles are then utilized to calculate the component inputs     

LIPS III-a solar cell test bed in space

The LIPS III satellite, which was launched into a 1100-km circular orbit of 60° inclination in the spring of 1987, is discussed. LIPS III is a member of the living-plume-shield class of spacecraft, all of which were built around a simple sheet metal plume deflector. The purpose of LIPS III was to provide a testbed for space power sources. An overview of the LIPS III system is given, and the experiments submitted for it, all but one of which were photovoltaic in nature, are described