TerraSAR-X active radar ground calibrator system

In April 2006, the TerraSAR-X satellite was launched. This paper describes the development of a novel and highly integrated, digitally-controlled active SAR system calibrator (DARC). It consists of both an active transponder path for absolute radiometric calibration and a calibrated receiver chain for antenna pattern evaluation of the satellite antenna. A total of 16 active transponder and receiver systems and 17 receiver-only systems will be fabricated for a calibration campaign in 2006.     

Synthetic-aperture radar processing using fast factorized back-projection

Exact synthetic aperture radar (SAR) inversion for a linear aperture may be obtained using fast transform techniques. Alternatively, back-projection integration in time domain can also be used. This technique has the benefit of handling a general aperture geometry. In the past, however, back-projection has seldom been used due to heavy computational burden. We show that the back-projection integral can be recursively partitioned and an effective algorithm constructed based on aperture factorization. By representing images in local polar coordinates it is shown that the number of operations is drastically reduced and can be made to approach that of fast transform algorithms. The algorithm is applied to data from the airborne ultra-wideband CARABAS SAR and shown to give a reduction in processing time of two to three orders of magnitude.     

A method for constructing an airfoil using a specified chord velocity diagram

A problem of determining a shape of the airfoil being streamlined by a potential incompressible inviscid flow is solved by the successive approximation method using a specified chord velocity diagram. It is shown that a closed airfoil that possesses a specified chord velocity diagram can be constructed with a sufficient accuracy; if the chord diagram is unsuccessfully specified, the closed airfoil may prove to be not univalent, that is, physically unrealizable.     

Recent Breakthroughs in RF Photonics for Radar Systems

Radar systems require transmission of very high purity signals. Photonics is now mature enough to achieve analog transmission with very low noise, strong immunity, and wide-bandwidth even in harsh environments. We present our recent developments of optimized optical links dedicated to radar and multifunction systems     

Two Methods of Spectral Estimation for SARSAT Signals

Search and rescue satellite aided tracking (SARSAT) depends on the processing of emergency locator transmitter (ELT) signals which are received by a satellite in low polar orbit. Since the signal from a distressed vehicle is normally immersed in a background of other ELT signals (false alarms), interference, and noise, different methods of spectral estimation can provide advantages in estimating carrier frequency. A comparison between average spectrum and minimum spectrum for several real signals is provided here.     

Subspace array processing for the suppression of FM jamming in GPS receivers

The mitigation of FM interference in GPS receivers is considered. In difference to commonly assumed wideband and narrowband interferers, the FM interferers are wideband, but instantaneously narrowband, and as such, have clear time-frequency (TF) signatures that are distinct from the GPS coarse acquisition (C/A) spread spectrum code. In the proposed technique, the estimate of the FM interference instantaneous frequency (IF) and the interference spatial signature are used to construct the spatiotemporal interference subspace. The IF estimates can be provided using existing effective linear or bilinear TF methods. The undesired signal arrival is suppressed by projecting the input data on the interference orthogonal subspace. With a multisensor receiver, the distinctions in both the spatial and TF signatures of signal arrivals allow effective interference suppressions. The deterministic nature of the signal model is considered and the known underlying structure of the GPS C/A code is utilized. We derive the receiver signal-to-interference-plus-noise ratio (SINR) under exact and perturbed IF values. The effect of IF estimation errors on both pseudorange measurements and navigation data recovery is analyzed. Simulation results comparing the receiver performances under IF errors in single and multiantenna GPS receivers are provided.     

Microdosimetric measurements of heavy ion tracks.

The biological effectiveness of radiations depends on the spatial pattern of ionizations and excitations produced by the charged particle tracks involved. Ionizations produced by both the primary ion and by energetic delta rays may contribute to the production of biologically relevant damage and to the concentration of damage which may effect the probability of repair. Although average energy concentration (dose) can be calculated using homogeneous track models, the energy is actually concentrated in small volumes containing segments of the ion and delta ray tracks. These local concentrations are studied experimentally using low pressure proportional counters, and theoretically, using Monte Carlo methods. Small volumes near an ion track may be traversed by a delta ray. If they are, the energy deposited will be similar to that produced by a single electron track in a low-energy x-ray irradiation. The probability of a delta ray interaction occurring decreases with the square of the radial distance from the track. The average energy deposited is the product of this probability and the energy deposited in an interaction. Average energy deposited calculated from measured interaction probability is in good agreement with the results of homogeneous track models.     

Reduced-order multiple model adaptive controller for flexiblespacestructure

The robustness of a moving-bank multiple model adaptive estimator/controller to order reduction in the controller design model is examined. It is shown that the adaptive mechanism and bank-moving logic are not confounded by the effects of unmodeled higher order modes of a large flexible spacestructure. Control characteristics are achieved that are essentially equivalent to those of an artificially informed benchmark controller     

Design for validation

An approach is outlined for the development of ultrareliable avionics for civil air transports using a design-for-validation philosophy that includes rigorous application of formal methods. The basic concept of the methodology is introduced, and the role of formal methods is explored. The impact of the design-for-validation philosophy on the system design process is then demonstrated by two simple examples. More details about the design-for-validation methodology are then given     

SETI education programs in Australia

This paper discusses and evaluates two innovative SETI education programs conducted at the University of Western Sydney, viz: the SETI Pathways Program and the Life in the Universe Curriculum Project.