An Optimally Integrated Track Recovery System for Aerial Bathymetry

An airborne system has been developed for charting shallow coastal and inland waters. The primary components of this system are an aerial survey camera, a profiling laser radar, an analytical stereo plotter, and a multisensor track recovery system (TRS). The TRS comprises a gimbaled inertial navigation system and a number of auxiliary sensors which acquire redundant position and attitude information. The sensor data are combined postmission using a U-D factorized Kalman filter and modified Bryson-Frazier smoother to compute accurate estimates of the orientation parameters of the survey camera at the times of film exposure. These parameters are used to position each overlapping pair of photographs on the analytical plotter to form a stereo image and corresonding analytical stereomodel from which water depth measurements are made. Flight trial results demonstrate that the TRS can achieve radial position and attitude accuracies which exceed 1 m and 2 arcmin root mean square (rms), respectively, and that this level of performance is sufficient to enable water depth measurements to be made to an accuracy of better than 0.65 m (rms).     

Space Station atmospheric monitoring systems.

A technology assessment study on atmospheric monitoring systems was performed by Battelle Columbus Division for the National Aeronautics and Space Administration's John F. Kennedy Space Center under Contract No. NAS 10-11033. In this assessment, the objective was to identify, analyze, and recommend systems to sample and measure Space Station atmospheric contaminants and identify where additional research and technology advancements were required. To achieve this objective, it was necessary to define atmospheric monitoring requirements and to assess the state of the art and advanced technology and systems for technical and operational compatibility with monitoring goals. Three technical tasks were defined to support these needs: Definition of Monitoring Requirements, Assessment of Sampling and Analytical Technology, and Technology Screening and Recommendations. Based on the analysis, the principal candidates recommended for development at the Space Station's initial operational capability were: (1) long-path Fourier transform infrared for rapid detection of high-risk contamination incidences, and (2) gas chromatography/mass spectrometry utilizing mass selective detection (or ion-trap) technologies for detailed monitoring of extended crew exposure to low level (ppbv) contamination. The development of a gas chromatography/mass spectrometry/matrix isolation-Fourier transform infrared system was recommended as part of the long range program of upgrading Space Station trace-contaminant monitoring needs.     

Design for testability for future digital avionics systems

The authors describe an integrated testing approach called the Maintenance and Diagnostic System (MADS), which was developed for digital avionics systems using VHSIC and semicustom devices. Mission/operational requirements dictate high availability with capability to detect 98% of all faults and isolate 90% of these faults to a line replacement module (LRM) or 95% of the faults to two LRMs. MADS achieves these goals by defining a module maintenance node (MMN) chip set for each LRM in the system and the design for testability concepts for hardware. The MMN aids parallel, high-speed testing of LRMs, isolating the fault(s) to a module/chip level while incurring less than 10% overhead. It uses the concepts of scan set design, pseudorandom test vector generation, output response compression, and separate scan set loops to test the SSI-MSI logic on the LRM. It also stores interim test results and run-time fault information to isolate the hard-to-reproduce failures and performs verification of interchip and intermodule wiring     

Computational Precision Requirements for Optimal Weights in Adaptive Processing

The required accuracy for computing the estimated optimum weights of an adaptive processor has been analyzed by investigating the effects of errors in computing the inverse matrix. It is shown that the required precision depends upon the matrix. An equation for the general case is derived. Several special cases are considered in detail. It is shown that the case of a single interference source requires the highest precision. The least stressing case is identifi'ed and compared to the worst case. The requirements for a "typical" case are also considered. A comparison of the requirements for the covariance matrix estimation technique and for adaptive weight implementation using gradient descent techniques is given. It is shown that there is a dichotomy in that cases that do not stress one technique tend to stress the other.     

The Circular Synthetic Radar

A new type of synthetic radar, the circular synthetic radar, uses a simple interferometer whose elements are mounted at the ends of a horizontal boom rotating about a vertical mast. Pulses are radiated alternately ?in-phase? and in ?phase-quadrature.? The returning echoes are also detected incoherently, both ?in-phase? and in ?phase-quadrature.? The four distinct outputs are fed into an on-line computer which, after a Fourier analysis, synthesizes a mapping function of the azimuthal distribution of targets.     

The Synthetic-Array Radar Image of a Flat Plate

The radar cross section of a flat plate has a sin x/x lobe structure. If a synthetic-array radar flies past the plate the resulting image is dependent upon what part of this lobe structure is sampled. When the plate is parallel to the flight path, the image is a line as wide as the plate. If the plate is not parallel, only the discontinuities at the ends of the plate are visible in the image.     

Activity Planning for the Space Station

This paper presents an overview of the identification and selection process of experiments and payloads for manned space flight missions, emphasizing the scope and magnitude of the problem of doing activity planning and the need for a methodology to assure timely flight and appropriate spacecraft design. Conclusions and results derived from the past several years are presented together with an analysis of the current procedure for defining activity for the space station.     

Experiments with injection of powerful plasma jet into the ionosphere

This paper describes two rocket experiments “Aelita” with high power lithium plasma injection. The results of onboard magnetometer, massspectrometer, photometer, plasma, corpuscular and ground radar measurements are given. Dynamics and structure of plasma formation are discussed.     

Improvement of Automatic Landing Through the Use of a Space Diversity ILS Receiving System

A space diversity method of receiving and processing ILS localizer information has been developed and flight tested. Multiple lateral ly separated antennas are used which sense the ILS signal on and around the approach path. Combining these signals suppresses ILS beam distortion produced by multipath signal interference and provides much improved guidance information to the landing aircraft control system.     

Possibilities of investigation of X-ray sources on archival plates

The use of archival plates for investigations on X-ray sources is discussed and several examples of results are given.