Observations of stars with the Hopkins Ultraviolet Telescope

The Hopkins Ultraviolet Telescope (HUT) was flown aboard the space shuttle Columbia as part of the Astro-1 mission during December 1990. During the nine-day flight, HUT carried out 3 Å resolution spectrophotometry of a wide variety of astronomical objects, including a number of stellar targets, in the 912–1860 Å range of the far ultraviolet. A few nearby stars were observed in the 415–912 Å range of the extreme ultraviolet as well. For nearly all of these targets, the spectra obtained by HUT are the first ever obtained in the spectroscopically rich region between Lyman (1216 Å) and the Lyman limit (912 Å). Here, we present highlights of the results obtained by HUT in a variety of areas of stellar astronomy.     

Periodic components in Cyg X-3

Hard X-ray observations of Cyg X-3 in the energy range 20–100 keV were made with a Balloon-borne telescope using two large area proportional counters. The source was seen with a total significance of 20.

A 121 s periodicity was seen during Fourier analysis of the data. The phenomenon can be interpreted as due to transient pulsation since no other peak was seen in our data. Quasi-periodic oscillation in the range 0.06–20 mHz have been observed from Cyg X-3 at lower energies. Interestingly, most of the reported periods are multiple of the present measurements. The observed pulsation at high energies indicate the occasional unstable behaviour of the inner parts of the accretion disk connected with the basic rotation period of the compact object.

The 4.8^h modulation, characteristic of the orbital period of the binary system was seen in the data, with a broad maximum between the phase 0.3 to 0.7.     

Deriving the spin rate/orientation from the quiescent spacecraft ABRIXAS using optical observations

With the loss of the battery system of ABRIXAS shortly after launch and consequent absence of telemetry, there was urgent need to determine ABRIXAS' spin rate and orientation in order to assess the possibility of re-establishing telemetry during periods of full-Sun orbits. We, therefore, conducted optical and video observations of ABRIXAS passages with a 1-second time resolution, and later simulated the optical appearance of ABRIXAS for several passages based on a three-dimensional model of the reflectivity properties of the 2.5m × 1.8m × 1.2m size-satellite. Here we present the results of the comparison of our grid of light curve models with the observations and show (i) how the spin rate of ABRIXAS slowed down between June and December 1999 and (ii) what information can be deduced on the temporal change of the orientation of the spin axis. We conclude with discussing the benefit of using ground based optical observation as a cost effective way to develop information about the orientation of a satellite when there is no telemetry.     

An Optimally Integrated Track Recovery System for Aerial Bathymetry

An airborne system has been developed for charting shallow coastal and inland waters. The primary components of this system are an aerial survey camera, a profiling laser radar, an analytical stereo plotter, and a multisensor track recovery system (TRS). The TRS comprises a gimbaled inertial navigation system and a number of auxiliary sensors which acquire redundant position and attitude information. The sensor data are combined postmission using a U-D factorized Kalman filter and modified Bryson-Frazier smoother to compute accurate estimates of the orientation parameters of the survey camera at the times of film exposure. These parameters are used to position each overlapping pair of photographs on the analytical plotter to form a stereo image and corresonding analytical stereomodel from which water depth measurements are made. Flight trial results demonstrate that the TRS can achieve radial position and attitude accuracies which exceed 1 m and 2 arcmin root mean square (rms), respectively, and that this level of performance is sufficient to enable water depth measurements to be made to an accuracy of better than 0.65 m (rms).     

Microgravity and the organisms: results of the Spacelab mission D1.

During the Spacelab mission D1 different organisms were investigated at the unicellular and multicellular level respectively. Microgravity affects growth and development of the organisms in a different manner, some processes are enhanced, others are inhibited. On the other hand, there are a lot of parameters. e.g. circadian rhythm or cell and organ polarity, which seem to be exclusively under genetical control.     

Space Station atmospheric monitoring systems.

A technology assessment study on atmospheric monitoring systems was performed by Battelle Columbus Division for the National Aeronautics and Space Administration's John F. Kennedy Space Center under Contract No. NAS 10-11033. In this assessment, the objective was to identify, analyze, and recommend systems to sample and measure Space Station atmospheric contaminants and identify where additional research and technology advancements were required. To achieve this objective, it was necessary to define atmospheric monitoring requirements and to assess the state of the art and advanced technology and systems for technical and operational compatibility with monitoring goals. Three technical tasks were defined to support these needs: Definition of Monitoring Requirements, Assessment of Sampling and Analytical Technology, and Technology Screening and Recommendations. Based on the analysis, the principal candidates recommended for development at the Space Station's initial operational capability were: (1) long-path Fourier transform infrared for rapid detection of high-risk contamination incidences, and (2) gas chromatography/mass spectrometry utilizing mass selective detection (or ion-trap) technologies for detailed monitoring of extended crew exposure to low level (ppbv) contamination. The development of a gas chromatography/mass spectrometry/matrix isolation-Fourier transform infrared system was recommended as part of the long range program of upgrading Space Station trace-contaminant monitoring needs.     

Accessing NASA technology with the World Wide Web

NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer and technology awareness applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. The NASA Technical Report Server (NTRS) provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people     

Design for testability for future digital avionics systems

The authors describe an integrated testing approach called the Maintenance and Diagnostic System (MADS), which was developed for digital avionics systems using VHSIC and semicustom devices. Mission/operational requirements dictate high availability with capability to detect 98% of all faults and isolate 90% of these faults to a line replacement module (LRM) or 95% of the faults to two LRMs. MADS achieves these goals by defining a module maintenance node (MMN) chip set for each LRM in the system and the design for testability concepts for hardware. The MMN aids parallel, high-speed testing of LRMs, isolating the fault(s) to a module/chip level while incurring less than 10% overhead. It uses the concepts of scan set design, pseudorandom test vector generation, output response compression, and separate scan set loops to test the SSI-MSI logic on the LRM. It also stores interim test results and run-time fault information to isolate the hard-to-reproduce failures and performs verification of interchip and intermodule wiring     

Computational Precision Requirements for Optimal Weights in Adaptive Processing

The required accuracy for computing the estimated optimum weights of an adaptive processor has been analyzed by investigating the effects of errors in computing the inverse matrix. It is shown that the required precision depends upon the matrix. An equation for the general case is derived. Several special cases are considered in detail. It is shown that the case of a single interference source requires the highest precision. The least stressing case is identifi'ed and compared to the worst case. The requirements for a "typical" case are also considered. A comparison of the requirements for the covariance matrix estimation technique and for adaptive weight implementation using gradient descent techniques is given. It is shown that there is a dichotomy in that cases that do not stress one technique tend to stress the other.     

The Circular Synthetic Radar

A new type of synthetic radar, the circular synthetic radar, uses a simple interferometer whose elements are mounted at the ends of a horizontal boom rotating about a vertical mast. Pulses are radiated alternately ?in-phase? and in ?phase-quadrature.? The returning echoes are also detected incoherently, both ?in-phase? and in ?phase-quadrature.? The four distinct outputs are fed into an on-line computer which, after a Fourier analysis, synthesizes a mapping function of the azimuthal distribution of targets.