晶体谐振器—振荡器测试设备及测试结果

一、引言美国陆军电子技术及器件实验室(ETDL)的频率控制与计时分部的主要任务是要提高晶体谐振器与振荡器工艺水平,以满足军队用户的要求。第二个任务是向计划管理人员、系统设计人员提供谘询并维持晶体谐振器与振荡器的军用技术指标(也就是MIL-C-3098和MIL-0-55310)。这些任务要求对晶体谐振器和振荡器的工艺水平有详细而实际的了解。本文的目的是概述本实验室的技术力量,介绍一些研究结果,并在需要时向国防部所属用户提供晶体振荡器的测试、选择、技术指标和研制方面的帮助。     

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

印度4月底试射射程3500km弹道导弹

印度计划于4月20日至30日之间试射射程达3500km的“阿格尼Ⅲ”战略导弹。“阿格尼Ⅲ”战略导弹是印度最具雄心的战略导弹,可携带1．5t核弹头。这将是“阿格尼Ⅲ”铁路机动型的第3次试射,将在印度东部奥里萨邦沿海的惠勒岛试验场进行。虽然“阿格尼Ⅲ”导弹的第一次试射于2006年7月失败,但2007年4月进行的第二次试射取得了成功。如果这次试射能获得成功,     

航空液压泵气蚀理论分析与试验验证

气蚀现象影响航空液压泵的使用寿命,通过分析某型飞机配套液压泵在开式液压系统中发生气蚀现象的机理,开展试验室模拟验证,并结合飞机实际使用提出改进措施,为外场使用提供了实用经验和理论支持。     

STUDY ON THE SOLUTION OF DYNAMIC THERMOELASTICITY SYSTEM

ＳＴＵＤＹＯＮＴＨＥＳＯＬＵＴＩＯＮＯＦＤＹＮＡＭＩＣＴＨＥＲＭＯＥＬＡＳＴＩＣＩＴＹＳＹＳＴＥＭＧｅｎｇＺｈｅｎｗｅｎ（ＢａｓｉｃＤｅｐａｒｔｍｅｎｔ，ＺｈｏｎｇｚｈｏｕＵｎｉｖｅｒｓｉｔｙ５２Ｈａｎｇｈａｉｚｈｏｎｇｌｕ，Ｚｈｅｎｇｚｈｏｕ４５０...     

A PARALLEL IMAGINARY EBE METHOD FOR SOLVING POSITIVE DEFINITE LINEAR SYSTEMS

ＡＰＡＲＡＬＬＥＬＩＭＡＧＩＮＡＲＹＥＢＥＭＥＴＨＯＤＦＯＲＳＯＬＶＩＮＧＰＯＳＩＴＩＶＥＤＥＦＩＮＩＴＥＬＩＮＥＡＲＳＹＳＴＥＭＳＰａｎＸｉａｏｓｕ（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＭａｔｈｅｍａｔｉｃｓ，ＰｈｙｓｉｃｓａｎｄＭｅｃｈａｎｉｓ...     

ELECTRONIC CONTROL OF TURBINE POWER UNITS

ＥＬＥＣＴＲＯＮＩＣＣＯＮＴＲＯＬＯＦＴＵＲＢＩＮＥＰＯＷＥＲＵＮＩＴＳ￥ＷａｎｇＤａｏｂｏ（ＤｅｐａｒｔｍｅｎｔｏｆＳｃｉｅｎｃｅａｎｄＴｅｃｈｎｏｌｏｇｙ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈｉｎａ）Ａｂｓ...     

DATA PROCESSING ON LINEARIZATION OF HOT-WIRE ANEMOMETER

ＤＡＴＡＰＲＯＣＥＳＳＩＮＧＯＮＬＩＮＥＡＲＩＺＡＴＩＯＮＯＦＨＯＴ－ＷＩＲＥＡＮＥＭＯＭＥＴＥＲ￥ＬｉＳｕｆｅｎ（ＤｅｐａｒｔｍｅｎｔｏｆＰｏｗｅｒＥｎｇｉｎｅｅｒｉｎｇ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈ...     

A NEW EXPRESSION OF FATIGUE SIZE FACTOR

ＡＮＥＷＥＸＰＲＥＳＳＩＯＮＯＦＦＡＴＩＧＵＥＳＩＺＥＦＡＣＴＯＲ￥ＹａｏＷｅｉｘｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＡｉｒｃｒａｆｔＥｎｇｉｎｅｅｒｉｎｇ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈｉｎａ）Ａｂｓｔｒａ...     

CONSTRUCTIONOFACLASSOFPNSEQUENCESWITHPRIMENUMBERPERIODSOF4t＋1FORM

构造了一类４ｔ＋１型质数周期的伪随机序列。该序列提供了比ｍ（Ｍ）序列更多的可供选择周期数，同时证明了它具有良好的伪随机特性