从图像信息容量和图像功率谱看 CBERS-1卫星图像

文章从信息容量和图像功率谱这两个方面评价了CBERS-1的图像质量。并通过将同一地区的CBERS-1图像和TM图像进行比较,客现反映了CBERS-1卫星的图像质量。实验结果表明CBERS-1图像在信息丰富程度和图像综合的纹理特征上与TM图像质量相当,具有很好的可比性。     

Statistical characteristics of locally generated ESF during equinoctial months over Sanya

Understanding the local generation rate of equatorial spread-F (ESF) is important for forecasting ionospheric scintillation. Using the GPS ionospheric scintillation/TEC and VHF radar data during March-April and September-October from 2010 to 2014, the occurrence of ionospheric scintillation, TEC fast fluctuation, and backscatter plume were studied. Through analyzing the simultaneous occurrence of ionospheric scintillation, TEC fast fluctuation and backscatter plume, the local generation rate of ESF over Sanya was investigated. The results show that the monthly generation rate varies between 0% and 68%. A significant equinoctial asymmetry of local generation rate of ESF can be found in 2010, 2013 and 2014. The local generation rate of ESF increases from 2010 to 2014 during March-April, while it does not have similar trend during September-October. The plasma vertical drift influenced by solar activity has a significant impact on the monthly generation rate. The equinoctial asymmetry of plasma vertical drift may contribute a lot to the equinoctial asymmetry of the generation rate of ESF.     

Analytical solution methods for eigenbuckling of symmetric cross-ply composite laminates

Based on the first-order shear deformation theory, this paper explores the analytical methods for eigenbuckling of symmetric cross-ply rectangular composite laminates with a pair of parallel edges simply supported and the remaining two edges arbitrarily constrained. The main con-tribution of present paper lies in two aspects: one is to present a simple and effective analytical method, namely, the separation-of-variables method, which can generate the closed-form buckling solutions without any computational difficulty;the other is to incorporate the accurate computation method of exponential matrix into the state space technique to avoid the inevitable numerically ill-conditioned problems reported in several literatures. The results obtained via both analytical meth-ods are identical, and a good agreement with their counterparts in literature is observed. The separation-of-variables method can generate exact solutions within 1 s, which is impossible if the state space method is employed. Besides, the combination of the accurate computation method of exponential matrix and the state space method greatly improves the computational efficiency and gives correct results compared with the straightforward use of state space method.     

小展弦比飞翼亚、跨、超声速支撑干扰研究

通过数值模拟方法研究了小展弦比飞翼标模在0.6、0.9、1.5三个典型马赫数下的支撑干扰特性,分别考虑了近场尾部外形局部畸变和尾支杆干扰及远场风洞中部支架干扰,并基于表面压力系数差异为准则尝试对近场干扰量进行分解。研究得到如下结论:马赫数0.6时,远场支撑阻力系数和俯仰力矩系数的干扰量约占总支撑干扰量的30%,升力系数约占20%;马赫数0.9、迎角2°时,阻力系数远场支撑干扰量占总支撑干扰量的40%,迎角18°时,远场支撑干扰使得涡破裂位置提前;马赫数1.5时,远场支撑干扰可以忽略;基于表面压力系数差异将支撑干扰量分解的方法在亚声速支撑干扰前传明显时不适用,在马赫数0.9、迎角2°时求得近场支撑干扰使得马赫数减小约0.02,迎角减小约0.1°,马赫数1.5时用此法求得马赫数和迎角的干扰量均约等于0。     

某型舵机放大器电老炼模拟负载方案论证

通过对舵机放大器电老炼各类负载进行权衡论证,研究出功率电阻与电感串联的模拟负载。经过方案论证和充分的试验,设计特定的激励信号,对该方案不断地优化和完善,最终基本模拟了电机特性。证明该方案可最大限度地模拟了实际负载电机的工作特性,更适合本单位目前的批生产状态。     

Predictive Modeling and Parameter Optimization of Cutting Forces During Orbital Drilling

To optimize cutting control parameters and provide scientific evidence for controlling cutting forces,cutting force modeling and cutting control parameter optimization are researched with one tool adopted to orbital drill holes in aluminum alloy 6061.Firstly,four cutting control parameters(tool rotation speed,tool revolution speed,axial feeding pitch and tool revolution radius)and affecting cutting forces are identified after orbital drilling kinematics analysis.Secondly,hybrid level orthogonal experiment method is utilized in modeling experiment.By nonlinear regression analysis,two quadratic prediction models for axial and radial forces are established,where the above four control parameters are used as input variables.Then,model accuracy and cutting control parameters are analyzed.Upon axial and radial forces models,two optimal combinations of cutting control parameters are obtained for processing a13mm hole,corresponding to the minimum axial force and the radial force respectively.Finally,each optimal combination is applied in verification experiment.The verification experiment results of cutting force are in good agreement with prediction model,which confirms accracy of the research method in practical production.     

月面无人自主采样返回任务动力下降点确定及验证

动力下降点确定是实施月面软着陆的重要环节，是多系统间复杂迭代的过程，涉及轨道设计、制导律设计、着陆目标的采样区确定、着陆及起飞安全分析。其设计结果直接影响了最终着陆点的位置和着陆过程的着陆安全，也间接影响采样安全和采样工程目标的实现结果。针对嫦娥五号在实施月面软着陆前确定动力下降点的任务需求，提出了通过多次轨道控制与最优标称制导轨迹搜索联合控制策略的动力下降点确定方法。首先，根据月面无人自主采样返回任务设计总结了动力下降点确定原理和约束条件；然后，详细论述了月面无人自主采样返回任务软着陆过程动力下降点确定方法；最后，通过嫦娥五号在着陆前主要的几次轨控实施结果分析了其对动力下降点的影响，同时综合了着陆区地形分析及着陆、起飞安全性分析，对动力下降点进行确定并根据最终在轨飞行结果进行验证。验证结果表明，基于“逐次逼近寻优方法”的月面软着陆环节动力下降点的确定方法有效，可以为后续地外天体软着陆等任务提供参考和借鉴。     

提高UV-LIGA制备金微细零件的尺寸精度研究(英文)

在众多影响UV-LIGA(Ultra-violet lithography Galvanik abformung)技术制备微细金属零件尺寸精度的因素中,SU-8胶溶胀性是最主要的。通常采用隔离带方法降低SU-8胶的溶胀性,以提高电铸微细零件的尺寸精度。由于贵重金属会沉积到隔离带内,造成了贵重金属的浪费,增加制造成本,因此该方法不适合贵重金属微细零件制造。针对隔离带方法的弊端,提出了半隔离带方法,在保证电铸微细金属零件尺寸精度的前提下,避免了贵重金属的浪费。另外,还采用电解液喷射方法实现了高电流密度电铸,缩短了电铸时间,进一步提高了电铸微细金属零件的尺寸精度。试验结果表明:采用半隔离带方法和高电流密度,可以有效提高金微细零件的尺寸精度,当电流密度提高到0.6A/dm2,金微细零件的尺寸精度可以达到5μm。     

小脉冲约束下的近圆轨道控制方法研究

对于近圆轨道平面内参数的控制,采用传统的双脉冲控制方法,一条轨道圈内至多只能进行两次轨道控制,在单次控制小脉冲约束下,整个控制周期会很长。文章针对单次控制小脉冲约束,提出了一种增加一条轨道圈内的轨道控制次数的近圆轨道平面内参数控制方法,达到了相对双脉冲变轨可以大幅缩短整个控制周期的目的。     

自适应前馈技术在精密运动控制中的应用

]