Landslide monitoring by combining of CR-InSAR and GPS techniques

Considering the limitations related to the landslide monitoring by Interferometric Synthetic Aperture Radar (InSAR) technique, the method of integration of Globe Positioning System (GPS) with Corner Reflector Interferometric SAR (CR-InSAR) techniques is proposed in this paper. Firstly, deformation in radar line-of-slight (LOS) direction is optimized by introducing the GPS-measured height and atmospheric delay products into the CR-InSAR model. Then, GPS-measured horizontal deformation and CR-InSAR measured LOS deformation are combined to produce the more accurate vertical deformation. Finally, high precision three-dimensional deformation (N, E, U) is projected to the along-slope direction to monitor the actual movement of landslide. In order to test this method, four X-band stripmap-mode TerraSAR images, eight Trihedral Corner Reflectors (TCR) data and eight GPS observed data are collected to monitor the deformation of three potential landslide fields located at the north of Shaanxi province, China. The detailed analysis demonstrates that the estimated precision of along-slope direction is about two times better for proposed method (±1.1 mm) versus GPS (±2.1 mm) in this case. Meanwhile, our result indicates that almost all of the monitoring points present the trends of sliding down along the slope at the different levels from April 9 2011 to August 30 2011, showing the certain instability. Further investigation of the relationship between the magnitudes of displacement at CR points and the implementation of early control reflects the rationality of our result. Our proposed method could provide of the strong support in the high precision landslide deformation monitoring.     

基于概率指标的民机乘坐品质最优控制律设计

基于概率观点的乘坐品质评价准则,采用极点配置方法进行了最优控制律设计,以提高大型客机的乘坐舒适性.设计过程中,特别考虑了满足飞行品质和舵面偏转的约束问题,通过具体算例验证了此设计方法能有效的改善大型客机的乘坐品质.     

航天器宽带随机振动响应分析

简要介绍了航天器宽带随机振动试验和分析的必要性以及世界上相关预示技术的发展与现状 ;然后以某卫星为例 ,利用有限元方法和统计能量分析( SEA)对整星的宽带随机振动力学环境进行了预示 ;经过与试验结果的对比 ,验证了上述方法的可行性     

难熔金属钽基自润滑复合材料的研制与应用

本文阐述采用粉末冶金热压烧结工艺,研制难熔金属钽基自润滑复合材料及其应用。讨论了该材料在大气中的摩擦磨损特性以及材料润滑相的结构分析。将该材料加工成保持架,在高真空条件下进行了轴承寿命试验;结果表明,保持架综合性能良好,可有效地提供润滑该类轴承的润滑条件。     

驾驶员建模精度分析方法的改进及应用

研究了驾驶员建模精度分析方法和提高建模精度的途径。基于驾驶员在环实时仿真结果,识别驾驶员描述函数,按加权最小二乘准则采用复形调优算法识别模型参数。结合两步识别过程,针对现有模型精度公式在最终模型检验上的缺陷,进一步完善了精度评价公式。根据公式提出了基于灵敏度分析的驾驶员模型参数调整方法。应用结果表明：所建立的公式和方法对提高驾驶员模型建模精度效果明显。     

基于多Agent的舰载机弹射起飞仿真层次模型(英文)

With the aid of multi-agent based modeling approach to complex systems, the hierarchy simulation models of carrier-based aircraft catapult launch are developed. Ocean, carrier, aircraft, and atmosphere are treated as aggregation agents, the detailed components like catapult, landing gears, and disturbances are considered as meta-agents, which belong to their aggregation agent. Thus, the model with two layers is formed i.e. the aggregation agent layer and the meta-agent layer. The information communication among all agents is described. The meta-agents within one aggregation agent communicate with each other directly by information sharing, but the meta-agents, which belong to different aggregation agents exchange their information through the aggregation layer first, and then perceive it from the sharing environment, that is the aggregation agent. Thus, not only the hierarchy model is built, but also the environment perceived by each agent is specified. Meanwhile, the problem of balancing the independency of agent and the resource consumption brought by real-time communication within multi-agent system （MAS） is resolved. Each agent involved in carrier-based aircraft catapult launch is depicted, with considering the interaction within disturbed atmospheric environment and multiple motion bodies including carrier, aircraft, and landing gears. The models of reactive agents among them are derived based on tensors, and the perceived messages and inner frameworks of each agent are characterized. Finally, some results of a simulation instance are given. The simulation and modeling of dynamic system based on multi-agent system is of benefit to express physical concepts and logical hierarchy clearly and precisely. The system model can easily draw in kinds of other agents to achieve a precise simulation of more complex system. This modeling technique makes the complex integral dynamic equations of multibodies decompose into parallel operations of single agent, and it is convenient to expand, maintain, and reuse the pro     

某新型航天器返回舱舱门共形天线研制

介绍了通过对返回舱舱门共形天线的材料和结构选择,结合热压罐和对模成型工艺方法研制了一种舱门共形天线。该天线已通过各项性能测试,性能稳定,已进行了装船,满足设计要求。     

航空制造系统的设计、评价及其仿真

主要论述了系统仿真技术在航空制造领域中的应用。通过利用系统仿真软件模拟飞机引擎涡轮叶片制造工厂的现有及未来的生产过程,并比较两个系统的生产绩效,如年产量及生产过程库存水平、机器使用率、劳动力利用率,来评价这一未来的生产系统。     

一种驱动扫描镜扫描运动的方法

文章提出了一种扫描镜扫描运动的驱动方法———基于凸轮匀速旋转驱动扫描镜的方法,推导了一种扫描镜的扫描运动规律方程和凸轮轮廓曲线方程,并对其进行了仿真。结果表明:该方法具有控制简单、扫描重复性较好的优点,能够满足某些光机扫描相机的要求,应用前景较好。     

基于自适应网格密度聚类的雷达信号分选算法

针对现有网格聚类中网格划分方法不能较好地适应所有数据分布、网格边界处理精度低等问题,提出基于自适应网格密度聚类的雷达信号快速分选算法.该算法首先引入了网格均匀度的概念,然后给出了自适应网格划分技术和网格均匀度的计算方法,最后进行均匀度可达聚类.该算法能自适应地发现不同密度的类及其边界,适合处理大规模侦察数据集.仿真实验表明该算法能有效适用于雷达信号分选.