Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

数字全息测量超高速撞击碎片云实验研究

在中国空气动力研究与发展中心(CARDC)超高速碰撞中心(HIRC)7.6 mm超高速碰撞设备的基础上，搭建纳秒级脉冲激光数字全息系统。提出滤波片和衰减片组合布置，减弱超高速碰撞等离子体自发光、提高信噪比的方法。实验获得了2.25 mm铝球弹丸以4.0 km/s的速度撞击0.5 mm厚铝板形成碎片云的全息图。采用小波变换算法对碎片云全息图进行重建，得到超高速撞击碎片云的三维结构和碎片大小。碎片云的轮廓呈椭球型，分为碎片云的前端、核心和外壳，碎片主要分布在弹丸破碎形成的碎片云核心，存在大碎片，且分布较集中，对后板的损伤也严重     

Availability modeling for periodically inspection system with different lifetime and repair-time distribution

Availability is a main feature of design and operation of all engineering system. Recently,availability evaluation of periodical inspection systems with different structures is at the center of attention due to the wide application in engineering. In this paper, an analytical and probabilistic availability model for periodical inspection system is proposed by a new recursively algorithm,which can achieve limiting average availability and instantaneous availability of periodical inspection system under arbitrary lifetime and repair-time distributions. Then three application examples are presented, the systems lifetime and repair-time are respectively fellow exponential/exponential,Weibull/normal and Weibull/lognormal distribution. Finally, a Weibull/lognormal system is studied to analyze the dynamic relationship between inspection period and availability. The results indicate that the proposed approach can provide the technology support for improving system availability and determining reasonable inspection period.     

直升机风险科目“斜坡起降”驾驶要领探讨

直升机在执行“紧急救援”和“抗震救灾”等特殊任务过程中往往不得已要进行风险科目“斜坡起降”。在这种情况下，操作上稍有不慎就会酿成重大事故，有的新机型在进行“斜坡起降”这一科目试验时甚至请国外飞行员来完成这项工作。文章就直升机“仰坡起降”、“顺坡起降”、“左横坡起降”和“右横坡起降”的操作要领作几点阐述，供飞行试验工程技术人员和飞行人员参考。     

靶场试验雷达组网信息系统设计

针对靶场试验跨区域雷达联合参试的特点,结合靶场试验信息实时处理显示需求,分析和比较了高层体系 结构(HLA)和试验训练使能体系结构(TENA)的原理和技术优势,设计了适用于靶场试验的雷达组网信息系统总 体框架,阐述了该系统的组成和功能,为提高靶场综合试验能力做出了探索。     

单液滴破碎空间尺寸分布特性的实验研究

为了研究液滴破碎后颗粒云空间尺寸分布的机理特性,通过试验方法并建立相应的均匀性指标数学模型,分析了不同We数对液滴破碎后颗粒群空间分布均匀性的影响。结果表明:(1)液滴袋状破碎后颗粒分布类似于袋形的蜂窝结构,并以类似爆破的形式向后方外围扩散分离。(2)多模式破碎后颗粒群为类似于"树"形结构的颗粒分布,前端有分布密集、粒径较小的聚集团,后方分布着大范围的颗粒群。(3)剪切破碎后颗粒群为类似"桶"形的颗粒分布,外围分布着大量颗粒,而内部分布较为复杂。(4)在We数为10~70时,颗粒群的离散率在整体上是呈现先升高后下降再升高的趋势。当We数为30和60时,两个方向上的离散率存在较大差异,而三种不同的破碎模式中,剪切破碎均匀性表现最好。     

Al/Ni含能多层膜在Al2O3陶瓷/不锈钢焊接中的应用

采用磁控溅射设备,生长AuSn合金做焊料层、Al/Ni含能多层膜做热量提供层,实现了不锈钢和Al_2O_3间的异质材料自蔓延高温扩散焊。利用SEM、XRD和DSC等测试手段表征AuSn合金和Al/Ni含能多层膜的微观形貌、相成分和放热量;用万能试验机测试焊接接头的力学性能。结果表明,AuSn合金的质量比基本达到80∶20,而多层膜的层状结构清晰,反应热达到1 239 J/g。焊接实验结果表明,仅使用AuSn焊料时,剪切强度仅为46 MPa,在增加Al/Ni含能多层膜后,其剪切强度可达90 MPa,强度提高了约一倍。焊接接头的界面显微形貌和相结构研究表明,剪切强度的增强主要是Al/Ni多层膜提供了额外能量使得界面处的反应剧烈,陶瓷金属化层与中间层的反应加剧,形成了新的反应生成物。     

非正交弧线齿面齿轮齿面设计及根切研究

非正交弧线齿面齿轮是以端面渐开线弧线齿圆柱齿轮为假想刀具包络展成的面齿轮。根据面齿轮啮合原理推导了非正交弧线齿面齿轮齿面方程,结合Matlab数学模型和根切理论研究了该种面齿轮的根切现象,计算出面齿轮不产生根切的最大内径,并通过Catia仿真滚齿来验证计算的准确性。该研究旨在提出一种新型非正交面齿轮,通过理论推导及仿真模拟来研究该种面齿轮的根切现象,在此基础上探究非正交弧线齿面齿轮的内径影响因素。研究结果表明:在同等参数下,当位置参数增大时,刀具渐开线截面高度和内径逐渐减小,当刀具圆弧半径增大时,内径逐渐减小,刀具渐开线截面高度逐渐增大。     

杨氏双缝干涉光程差近似计算的弱化条件分析

利用平面几何勾股定理,推导出杨氏双缝干涉实验光程差的准确表达式,对光程差表达式进行同解变换,反演了明纹中心坐标与光程差的函数关系,并对明纹中心坐标表达式进行了分析讨论,给出了数值解,得出了 5点结论。结论表明,杨氏双缝干涉实验光程差近似计算的条件可弱化为光程差远小于双缝间距,且利用经典近似方法计算明纹中心坐标在干涉级次较大时误差较大。