一种可实现增益、带宽独立调控的低噪声MEMS加速度计接口电路设计

为了进一步满足振梁式加速度计(VBA)对前端放大接口电路增益、带宽以及噪声的更高要求,提出了一种适用于硅微振梁式加速度计的可实现增益、带宽独立调控的低噪声前端放大接口电路。该设计基于T型接口电路的两级拓扑结构,有效解决了增益、带宽和噪声之间的制约问题。通过仿真与实验结果表明,该设计在等效跨阻增益为40MΩ的前提下,最终实现了带宽为410kHz、相位误差为1.2°、等效输入电流噪声密度为■。基于该设计的实验样机在上电稳定后1h零偏不稳定性达1.156μg,相较于传统一级跨阻接口电路减小了49.2%(2.274μg),验证了该新型接口电路的可行性和优越性。     

Real-time mosaicking for infrared videos from an oblique sweeping camera

Image mosaicking is widely used in Geographic Information Systems (GISs) for large-scale ground surface analysis. However, most existing mosaicking methods can only be used in offline processing due to the enormous amounts of computation. In this paper, we propose a novel and practical algorithm for real-time infrared video mosaicking. To achieve this, a novel fast template matching algorithm based on Sum of Cosine Differences (SCD) is proposed to coarsely match the sequential images. The high speed of the proposed template matching algorithm is obtained by computing correlation with Fast Fourier Transform (FFT). We also propose a novel fast Least Squares Matching (LSM) algorithm for inter-frame fine registration, which can significantly reduce the computation without degrading the matching accuracy. In addition, the proposed fast LSM can effectively adapt for noise degradation and geometric distortion. Based on the proposed fast template matching algorithm and fine registration algorithm, we develop a practical real-time mosaicking approach which can produce seamless mosaic image highly efficiently. Experiments on synthetic and real-world datasets demonstrate that the proposed algorithm is not just computationally efficient but also robust against various noise distortions.     

非线性弹簧形态优化及可调节恒力装置设计

基于组合结构研究一种可调节恒力装置的设计方法,恒力装置由负刚度非线性弹簧和正刚度线性弹簧组合而成。采用B样条曲线描述非线性弹簧的形态,基于GA算法和非线性有限元法实现非线性弹簧的形态优化设计。根据恒力装置的工作原理,设计线性螺旋弹簧,并分析刚度/强度特性。组合结构的力学性能分析表明恒力装置可以实现输出恒力。为了实现自我保护、输出的恒力大小/方向可调,进行了恒力装置的部组件设计。本文的恒力装置设计方法为平面薄膜天线和太阳电池阵的工程研制提供了技术支撑。     

复杂电磁环境中智能决策对抗技术的应用

当前雷达技术的发展突飞猛进,复杂的电磁环境已经是战场必须面对的现实情况,提出了一种可适应战场复杂电磁环境的智能干扰技术,主要从分选、干扰策略和干扰效能评估等方面讨论了整个智能对抗干扰的原理,对战场指挥决策有一定参考价值。     

Active Design Method of Tooth Profiles for Cycloid Drive Based on Meshing Efficiency

An active design method of tooth profiles for cycloid gears based on their meshing efficiency is proposed.This method takes the meshing efficiency as one of the design variables to determine the tooth profiles. The calculation method for the meshing efficiency of planetary transmission is analyzed and the equation of the meshing efficiency is deduced. Relationships between the meshing efficiency,the radius of the pin wheel and the eccentric distance are revealed. The design constraint quations and the strength constraint quations are deduced. On the basis of this,a design procedure is laid out. Some examples using different input parameters are conducted to demonstrate the feasibility of the approach. A dynamic simulation of the rigid-flexible coupling of cycloid gears is also presented. The results show that the proposed design method is more flexible to control the tooth profiles by changing the input values of the transmission efficiency.     

壁温对隔离段激波串振荡的影响

为了探索存在换热条件下超燃冲压发动机隔离段内部的复杂流动机理,采用2阶精度的非定常数值模拟程序研究了壁温对隔离段内部激波串振荡特性的影响。结果表明:压力振荡曲线与激波串前缘位置之间存在紧密关系。此外,随着壁温升高,隔离段壁面压力振荡的频率减小、振幅增加。研究还发现,隔离段压力振荡标准差最大值位于激波串前缘激波及其与上下壁面边界层相互作的位置,而湍动能最大值则分布在分离区后侧剪切层区域内。      

复合材料制造过程仿真技术综述

复合材料制造过程仿真技术的有效应用可以在复合材料构件设计之初对其制造过程中可能出现的缺陷,如分层、孔隙、温度不均、变形等问题进行预测,从而为优化构件结构、调整工艺参数或模具型面提供依据。对目前复合材料设计制造领域常用的一些软件进行简要介绍,并针对目前复合材料制造过程温度场分布和固化变形仿真技术中存在的问题进行了阐述与讨论。     

高性能产品(零件)制造技术特征现状的研究分析

系统分析各类高性能制造以注重零件的几何尺寸精度所带来的问题,即在具备超精密、高精度加工能力后,由"合格的高精度零件"装配出的产品至今依然还是合格率低、参数稳定性差的本质内因.首次从零件制造微观角度提出了产品生产合格率低、参数稳定性差是由零件表面微观特征与产品技术特征非匹配性导致的,提出了全新的产品制造理念,从注重零件的几何尺寸精度向关注零件制造微观工艺特征与产品技术特征的匹配性和符合性转变.形成和建立起我国自主创新的高性能产品制造思想和产品制造工艺技术体系,才能从根本上解决产品生产制造合格率低、参数稳定性差等问题,才能形成有继承性、可持续、稳定的产品制造技术体系,而这一切是工业4.0制造模式无法解决的.     

复合材料界面模态混合度研究

综述了消除复合材料界面裂纹应力奇异性及求解界面模态混合度的主要方法,分析讨论了各个方法的优缺点.通过分析讨论发现:模态混合度表征界面力学性能可以准确地描述界面裂纹尖端处各应变能释放率分量的振荡特性;求解与裂纹扩展长度无关的各应变能释放率分量及模态混合度是研究复合材料界面裂纹问题的难点;采用混合模态界面力学性能试验方法验证基于正则化长度等求解模态混合度方法的有效性,进而准确预测复合材料分层的发生及扩展是今后研究复合材料界面力学问题的发展方向.     

含金属纳米线多孔铝膜微偏振器的研究

含金属纳米线的多孔铝膜在近红外光区表现出较好的偏振特性。基于金属线栅偏振器的偏振原理,从金属纳米线对不同方向偏振光的消光机理出发,构建了以一排纳米线为研究对象的理论模型,分别计算了电矢量平行于纳米线轴向的偏振光（P）和电矢量垂直于纳米线轴向的偏振光（S）垂直入射时的光学损耗。在入射光波长固定的条件下,得到了P分量光、S分量光的透射率与模板孔径的关系。