飞行模拟技术在红外/微波复合导引头测试中的研究与应用

飞行模拟技术在导引头研制的各个阶段都发挥着重要的作用,以微波暗室环境下复合导引头飞行模拟自动化测试系统为工程背景,其包含主控系统、三轴转台、二维目标三大分系统,是一套集机、光、电为一体的大型综合性测试系统。详述了测试系统的软硬件设计原理,通过五轴系统设计、转台与目标的分体式同步联动、二维目标模拟装置的精准平稳传动、陀螺指向测试的转台偏角修正算法几大关键创新型技术,建立起了一套飞行模拟自动化测试系统,解决了目标飞行轨迹模拟、导引头调试测试的难题,实现了红外/微波复合导引头动态特性的自动化测试。     

鸭式飞机矢量喷流对大迎角气动特性的影响

针对单发鸭式布局飞机，通过低速风洞试验，研究了矢量喷流对飞机大迎角气动力的影响特性。研究结果表明：发动机喷口直径变大使得飞机大迎角升力和阻力系数增加，并产生低头力矩系数。喷流使得飞机大迎角升力和阻力系数明显增加，并产生低头力矩系数；大喷口状态喷流影响比小喷口状态高50%左右。发动机喷管上/下偏转时，矢量喷流对飞机上下表面气流诱导不对称，喷管上偏减小升力和阻力系数、产生抬头力矩系数，喷管下偏增加升力和阻力系数、产生低头力矩系数，且喷管下偏影响明显比上偏大。在此基础上，基于数值模拟结果对喷流与飞机主流的相互作用机理进行了分析。     

手性液晶聚合物的合成及其性能研究

手性侧链分子型液晶材料由于具有许多独特的物理性质,例如具有选择性光反射、光电反射效应等,因而在航空航天、军事电子科技等领域中有着重要的应用意义。本论文首先合成三种新型液晶单体:M1、M2和M3,然后将其接枝共聚到聚甲基氢硅氧烷的主链上,以合成一种新型手性侧链液晶聚合物。这种高分子手性液晶聚合物,在电子信息、数据存储、非线性应用光学器件及光电子器件等许多领域中,具有重要的潜在应用前景。     

FEC design for remote control and data transmission of aeronautic and astronautic vehicles

This paper focuses on the advanced Forward Error Correction(FEC) based on LowDensity Parity-Check(LDPC) codes for remote control and data transmission of Aeronautic and Astronautic Vehicles(AAV). It shows that the nontransparent LDPC codes with odd row weights are able to resist phase inversion with a small computational overhead. To the best of our knowledge, it is the first time to use FEC to resist phase inversion. Then, a high hardware-efficient FEC design for AAV, which is capable of correcting random errors as well as phase inversion, is proposed based on circulant decomposition with circulant size of 2s. Such a(4096, 2048) LDPC code has been adopted in a data transmission system due to its excellent error performance and hardware efficiency.     

Effect of salt stress on growth and physiology in amaranth and lettuce: Implications for bioregenerative life support system

Growing plants can be used to clean waste water in bioregenerative life support system (BLSS). However, NaCl contained in the human urine always restricts plant growth and further reduces the degree of mass cycle closure of the system (i.e. salt stress). This work determined the effect of NaCl stress on physiological characteristics of plants for the life support system. Amaranth (Amaranthus tricolor L. var. Huahong) and leaf lettuce (Lactuca sativa L. var. Luoma) were cultivated at nutrient solutions with different NaCl contents (0, 1000, 5000 and 10,000 ppm, respectively) for 10 to 18 days after planted in the Controlled Ecological Life Support System Experimental Facility in China. Results showed that the two plants have different responses to the salt stress. The amaranth showed higher salt-tolerance with NaCl stress. If NaCl content in the solution is below 5000 ppm, the salt stress effect is insignificant on above-ground biomass output, leaf photosynthesis rate, Fv/Fm, photosynthesis pigment contents, activities of antioxidant enzymes, and inducing lipid peroxidation. On the other hand, the lettuce is sensitive to NaCl which significantly decreases those indices of growth and physiology. Notably, the lettuce remains high productivity of edible biomass in low NaCl stress, although its salt-tolerant limitation is lower than amaranth. Therefore, we recommended that amaranth could be cultivated under a higher NaCl stress condition (<5000 ppm) for NaCl recycle while lettuce should be under a lower NaCl stress (<1000 ppm) for water cleaning in future BLSS.     

Time series modeling and analysis of trends of daily averaged ionospheric total electron content

A 10.7 cm solar radio flux F10.7, geomagnetic planetary equivalent amplitude (Ap index), and period variations were considered in this paper to construct a linear model for daily averaged ionospheric total electron content (TEC). The correlation coefficient of the modeled results and International GNSS Service (IGS) observables was approximately 0.97, which implied that the model could accurately reflect the realistic variation characteristics of the daily averaged TEC. The influences of the different factors on TEC and its characteristics at different latitudes were examined with this model. Results show that solar activity, annual and semiannual cycles are the three most important factors that affect daily averaged TEC. Solar activity is the primary determinant of TEC during periods with high solar activity, whereas periodic factors primarily contribute to TEC during periods with minimum solar activity. The extent of the influences of the different factors on TEC exhibits obvious differences at varying latitudes. The magnitude of the semiannual variation becomes less significant with the increase in latitude. Furthermore, a geomagnetic storm causes an increase in TEC at low latitudes and a decrease at high latitudes.     

High-temperature tribological behaviors of a Cr-Si co-alloyed layer on TA15 alloy

A Cr-Si co-alloyed layer was successfully deposited on TA15 alloy by the double glow plasma surface technology to improve its poor wear resistance at elevated temperature.The microstructure,composition,and phase structure of the layer were investigated by SEM,EDS,and XRD.The tribological behaviors of the Cr-Si co-alloyed layer at 20 ℃ and 500 ℃ were analyzed in details.The results indicated that the friction coefficient and wear rate of the Cr-Si coalloyed layer at 20 ℃ and 500 ℃ were much lower than those of the substrate,which was due to higher hardness and superior elastic modulus.This layer may become an approach to effectively improving the wear resistance of TA15 alloy at elevated temperature.     

基于激光激励的火工冲击响应及其特性研究

针对传统火工冲击激励方法在频率范围方面的局限性，研究新兴的激光激励方式、激励特性及其参数的影响，探究模拟火工冲击试验的可行性。首先参考经典的冲击试验方法，制定了激光激励试验的试验方案，设计了试验装置并进行了冲击试验；然后针对火工冲击和激光激励的试验结果，在时域、频域进行了时频分析和响应谱分析与对比；最后依据该试验方法，讨论了激光脉冲频率和激光脉冲能量对冲击响应的影响。研究提出的激光激励方法对火工冲击机理研究与地面模拟试验设计具有一定的参考价值。     

基于随机减量的运行模态频域分析方法

以高层建筑、大跨桥梁等难以进行人工激励的大型复杂结构为对象,提出并实现了一种基于随机减量技术和复模态指示因子函数法的新型频域运行状态模态参数识别方法.由随机运行响应估计随机减量函数,然后通过时频域变换得到频域的半功率谱密度函数,并用复模态指示因子函数法从半功率谱密度函数中识别结构模态参数.最后对1个三维空间结构模型进行算法验证,得到相应的各阶模态参数,证明了将随机减量技术和复模态指示因子函数法相结合的方法识别大型结构模态参数的有效性和合理性.     

型号标准化文件体系的建立与管理

概述型号标准化文件体系的内涵、特点、作用以及文件体系的组成,阐明型号标准化文件体系与企业标准体系以及型号文件系统的关系.介绍型号标准化文件体系的运行与管理.