Formation of polymer micro-agglomerations in ultralow-binder-content composite based on lunar soil simulant

We report results from an experiment on high-pressure compaction of lunar soil simulant (LSS) mixed with 2–5?wt% polymer binder. The LSS grains can be strongly held together, forming an inorganic-organic monolith (IOM) with the flexural strength around 30–40?MPa. The compaction pressure, the number of loadings, the binder content, and the compaction duration are important factors. The LSS-based IOM remains strong from ?200?°C to 130?°C, and is quite gas permeable.     

Influence of thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations

Vortex-acoustic coupling is one of the most important potential sources of combustion instability in solid rocket motors (SRMs). Based on the Von Karman Institute for Fluid Dynamics (VKI) experimental motor, the influence of the thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations is numerically studied via the large eddy simulation (LES) method. The simulation results demonstrate that vortex shedding is a periodic process and its accurate frequency can be numerically obtained. Acoustic modes could be easily excited by vortex shedding. The vortex shedding frequency and second acoustic frequency dominate the pressure oscillation characteristics in the chamber. Thermal inhibitor position and gas temperature have little effect on vortex shedding frequency, but have great impact on pressure oscillation amplitude. Pressure amplitude is much higher when the thermal inhibitor locates at the acoustic velocity anti-nodes. The farther the thermal inhibitor is to the nozzle head, the more vortex energy would be dissipated by the turbulence. Therefore, the vortex shedding amplitude at the second acoustic velocity antinode near 3/4L (L is chamber length) is larger than those of others. Besides, the natural acoustic frequencies increase with the gas temperature. As the vortex shedding frequency departs from the natural acoustic frequency, the vortex-acoustic feedback loop is decoupled. Consequently, both the vortex shedding and acoustic amplitudes decrease rapidly.     

基于OpenFlow的AFDX网络虚拟链路动态优先级接纳控制

为了在航空电子全双工交换式以太网(AFDX)中更加灵活地对虚拟链路(VL)实行接纳控制,将OpenFlow引入AFDX网络中,建立了相应的网络模型、消息模型和流量模型。利用网络演算方法分析了优先级VL在基于OpenFlow的AFDX网络中的端到端延迟上界,结合粒子群优化算法,提出了动态优先级接纳控制算法。理论分析结果表明:与动态非优先级接纳控制方法和传统静态优先级分配方法相比,本算法的消息延迟分别降低了49.2%和26.4%,并且本算法能够更加灵活地对VL实行接纳控制,提高网络资源的利用率。最后通过仿真对理论分析的结果进行了验证。本算法为提高接纳控制方法的性能提供了参考,增强了AFDX网络的通信效率与实时性能。     

Adaptive Angular Velocity Tracking Control of Spacecraft with Dynamic Uncertainties

The tracking of orientation and angular velocity is a primary attitude control task for an on-orbit space- craft. The problem for a rigid spacecraft tracking a desired angular velocity profile is addressed using an adaptive feedback control. An angular velocity feedback tracking algorithm is firstly developed based on the precisely known attitude dynamics of the spacecraft, and the global tracking of the control algorithm is proved based on the Lya- punov analysis. An adaptation mechanism is then designed to deal with the dynamic uncertainties of the spacecraft. Such an adaptation mechanism enables the controller to track any desired angular velocity trajectories even in the presence of uncertain inertia parameters, although it does not guarantee the inertia tensor being precisely identified. To verify the effectiveness of the proposed adaptive control policy, computer simulations on dynamic equations of a spacecraft are conducted and their results are discussed.     

固体火箭发动机中铝粉燃烧研究概述

介绍了固体火箭发动机中单个铝颗粒燃烧模型的发展与铝颗粒的燃烧特性;阐述了铝粉分布燃烧现象、分布燃烧放热与声场的耦合关系及其对发动机稳定性的增益作用;总结了惰性颗粒的阻尼理论以及在表面旋涡脱落条件下惰性颗粒对压强振荡的放大作用;提出了应从复杂流场中全面考虑铝粉燃烧对发动机的增益与阻尼作用,建立其对发动机工作稳定性影响的综...     

Application of China–Brazil Earth resources satellite in China

The launch and successful operation of Chinese–Brazil Earth resources satellite (CBERS-1) in China has accelerated the application of space technology in China. These applications include agriculture, forestry, water conservation, land resources, city planning, environment protection and natural hazards monitoring and so on. The result of these applications provides a scientific basis for government decision making and has created great economic and social benefits in Chinese national economy construction. In this paper we present examples and provide auxiliary documentation of additional applications of the data from Earth resource monitoring.     

Infrared radiation signature of exhaust plume from solid propellants with different energy characteristics

The infrared radiation signature of the plume from solid propellants with different energy characteristics is not the same. Three kinds of double-base propellants of different energy characteristics are chosen to measure the infrared spectral radiance from 1000 cm 1 to 4500 cm 1 of their plumes. The radiative spectrum is obtained in the tests. The experimental results indicate that the infrared radiation of the plume is determined by the energy characteristics of the propellant. The radiative transfer calculation models of the exhaust plume for the solid propellants are established. By including the chemical reaction source term and the radiation source term into the energy equation, the plume field and the radiative transfer are solved in a coupled way. The calculated results are consistent with the experimental data, so the reliability of the models is confirmed. The temperature distribution and the extent of the afterburning of the plume are distinct for the propellants of different energy characteristics, therefore the plume radiation varies for different propellants. The temperature of the fluid cell in the plume will increase or decrease to some extent by the influence of the radiation term.     

基于使命任务分解的航空电子跨平台通信组织与仿真

在先进的综合化航空电子系统设计中,跨平台通信的组织将直接体现使命任务的需求。通过功能流程框图将航空电子系统使命任务各个阶段分解为功能组件,给出了一种功能组件之间跨平台信息交互的组织方法,并采用移动自组织通信的方式实现。将某任务片段中的空中图像信息传输作为模拟案例,使用OPNET软件进行仿真研究。仿真结果表明,该方法根据任务的特性设定平台之间的动态通信过程,与没有经过使命任务分解设计的对照组相比,在同等发射功率下能够有效地降低误码率。     

单向碳／碳复合材料的蠕变内应力

用应力降落法测定单向ＰＡＮ基碳纤维Ｔ３００增加热碳基复合材料在１９００－２３５０℃蠕变内应力σ０，结果及分析表明，对单向Ｃ／Ｃ复合材料，σ０不是一个材料常数，而是温度Ｔ、初始力σｓ及结构因子Ｓ的函数，即σ０＝σ０（ｔ，σｓ，Ｓ）。     

运七飞机外表面沟纹膜减阻的实验研究

在１：１２运七原型全金属模型具有湍流流动的表面上粘贴沟纹膜，研究了沟纹膜对飞机阻力的影响。实验表明，顺流向沟纹膜粘贴在飞机具有湍流的表面上，可以减少飞机阻力５％～８％。