航天着陆试验场指挥控制系统设计与实现

指挥控制系统是航天着陆试验场不可或缺的一部分,完成试验指挥、控制、管理、视频监控、数据分析与处理、故障判别、仿真、授时、通信等功能。文章所介绍的某航天着陆试验场指挥控制系统,由时统子系统、通信子系统、语音调度子系统、视频监控子系统、大屏幕投影显示子系统、数据处理与存储子系统、指令发控台、指显工作站、软件等组成。系统结构采用双机双网并行工作模式设计。作为数据传输核心的通信子系统,采用双网热备路径冗余设计;作为数据处理与指令发布核心的处理服务器、数据库服务器和控制计算机,设计上都采用了双机并行技术。实践证明,上述技术的运用从系统结构上避免了由于单点故障而引起的系统宕机,提高了系统的可靠性和安全性。     

Numerical Simulation of a Swept Wing Hot-air Anti-icing System

对后掠翼热气防冰系统的表面温度进行了数值仿真研究.用欧拉方法计算局部水收集系数,外部对流换热系数用附面层积分法计算,蒙皮导热和内部换热用计算流体力学(CFD)方法计算,用基于FLUENT的用户自定义函数(UDF)方法将外部换热、蒙皮导热和内部换热三者耦合求解,实现了热流边界条件的自动加载和温度的自动更新.通过对ARJ21-700机翼防冰系统性能的计算,说明所研究的计算方法能对三维后掠翼热气防冰系统作出总体性能的评估和局部性能的评价,为自然结冰条件下飞机的飞行试验提供依据,从而大大降低飞行试验风险.     

多模函数优化的改进花朵授粉算法

为了探讨花朵授粉算法（FPA）在解算多模函数优化问题中存在的不足,通过定义种群多样性及差异性指标,定性分析了FPA在多模复杂函数优化中的寻优缺点。基于模拟退火思想优化全局授粉过程,并利用Nelder-Mead单纯形搜索技术对花朵局部授粉进行重构,提出一种新的花朵授粉寻优架构。仿真结果表明,相对于基本的FPA、布谷鸟算法、萤火虫算法,改进花朵授粉算法能够有效避免陷入局部最优,具备优异的全局勘探和局部开采能力,对多模优化问题具有一定优势。      

三维发动机进气道水滴撞击特性分析

用带数值扩散项的欧拉法对某型三维发动机进气道水滴撞击特性进行了研究.实现了可压流场中三维复杂形体的局部水滴收集系数的计算.数值扩散项的引入解决了欧拉法计算产生奇异结果发散的问题.通过对不同进气道流量的算例结果的比较,发现进气道流量对进气道唇口附近的水滴撞击区和撞击量都有影响.进气量大,最大局部水滴收集系数也大.通过对有无整流罩的计算结果进行比较,发现此型发动机整流罩对水滴撞击特性的影响很小.      

电脉冲除冰系统电磁脉冲力仿真分析

为了获得更精确的电脉冲除冰(EIDI)系统中电磁力在飞机蒙皮上的分布及其随时间变化的情况,针对系统的工作原理与工作过程进行了仿真研究。计算分析了EIDI系统电路中电流随时间变化的关系;通过麦克斯韦方程组的求解完成了EIDI系统电磁场的仿真;计算分析了电磁力随时间变化的规律,获得了蒙皮上的磁感应强度分布、涡电流密度分布和瞬态电磁力密度分布。考虑线圈工作时蒙皮对其电感的影响,建立了更接近真实电路的激励加载方法,得到了准确的电磁力变化趋势;考虑趋肤效应对蒙皮厚度方向上涡电流密度、电磁力密度分布的影响,用有限元分析方法使蒙皮上电磁力分布的计算更为全面合理。      

A fast arc fault detection method for AC solid state power controllers in MEA

Arc fault detection is desperately required in Solid State Power Controllers (SSPC) in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study has been done to obtain the faulted current data. In order to improve the detection speed and accuracy, two fast arc fault detection methods have been proposed in this paper with the analysis of only half cycle data. Both Fast Fourier Transform (FFT) and Wavelet Packets Decomposition (WPD) have been adopted to distinguish arc fault currents from normal operation currents. Analysis results show that Alternating Current (AC) arcs can be effectively and accurately detected with the proposed half cycle data based methods. Moreover, experimental verification results have also been provided.     

国外搓(滚)丝工艺控制技术

要想搓（滚）出合格的螺纹标准件，首先要选择合适的毛坯直径。毛坯直径选得过大或过小都无法加工出合格的螺纹产品。全国螺纹标委会与３０１所前不久曾就此问题组织了专题学术研讨，对美国、日本、前苏联的毛坯直径计算方法作了概要介绍，这里就不再赘述了。除与毛坯直径...     

企业微机管理信息系统

本文介绍了《企业微机管理信息系统》的开发与实现。     

多向C/C复合材料烧蚀表面粗糙度初步研究

对C／C复合材料的烧蚀表面粗糙度进行了测量，并对不同编织结构和不同基体组元的C／C复合材料的烧蚀表面粗糙度进行了比较分析。研究发现：基体组元相同时采用多向结构的C／C复合材料烧蚀表面粗糙度明显降低；编织结构相同时，舍有沉积碳组元的碳／碳复合材料烧蚀表面粗糙度明显降低。     

State of art on energy management strategy for hybrid-powered unmanned aerial vehicle

New energy sources such as solar energy and hydrogen energy have been applied to the Unmanned Aerial Vehicle(UAV), which could be formed as the hybrid power sources due to the requirement of miniaturization, lightweight, and environmental protection issue for UAV. Hybrid electrical propulsion technology has been used in UAV and it further enforces this trend for the evolution to the Hybrid-Powered System(HPS). In order to realize long endurance flight mission and improve the energy efficiency of UAV, many researching works are focused on the Energy Management Strategy(EMS) of the HPS with digital simulation, ground demonstration platforms and a few flight tests for the UAV in recent years. energy management strategy, in which off-line or on-line control algorithms acted as the core part, could optimize dynamic electrical power distribution further and directly affect the efficiency and fuel economy of hybrid-powered system onboard.In order to give the guideline for this emerging technology for UAV, this paper presents a review of the topic highlighting energy optimal management strategies of UAV. The characteristics of typical new energy sources applied in UAV are summarized firstly, and then the classification and analysis of the architecture for hybrid power systems in UAV are presented. In the context of new energy sources and configuration of energy system, a comprehensive comparison and analysis for the state of art of EMS are presented, and the various levels of complexity and accuracy of EMS are considered in terms of real time, computational burden and optimization performance based on the optimal control and operational modes of UAV. Finally, the tendency and challenges of energy management strategy applied to the UAV have been forecasted.