低空突防任务下综合飞行/推进系统的建模与仿真

建立了综合飞行／推进系统的数学模型，介绍了飞机全维非线性数学模型和涡轮风扇发动机非线性部件级数学模型的建模及综合方法。对飞机执行地形中随任务时，飞行员调节飞行速度的方法与基于总能量的调节飞行速度的方法进行了比较。结果表明，基于总能量的方法比飞行员直接控制飞行速度能够减小发动机的燃油消耗，降低发动机的磨损，进而可以增加飞机的航程，延长发动机的使用寿命。     

利用秩统计方法确定不完全S-N数据的p-S-N曲线

本文依据结构不同可靠度下的S—N曲线形状参数相同的观点，利用复合材料结构的不完全S—N数据，得到一组不完全疲劳极限数据，并采用秩统计方法，求得结构的p—S—N曲线，最后，给出了两个应用实例，通过对比分析了本文方法与假定完全寿命法的处理结果，发现本文方法充分利用了数据信息，能给出更好的疲劳性能。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

运载火箭模态试验仿真技术研究新进展

针对传统数学模型修改技术无法解决大型工程问题的局限性,为了实施模态试验仿真,提出一套适用于航天器复杂结构模型修改新技术,称之为子结构试验建模综合技术。简要综述在运载火箭模态试验仿真技术方面研究的新进展,并介绍两个应用实例:一是CZ-2E运载火箭全箭模态试验仿真与预示,用介绍的模态试验仿真技术成功地预示运载火箭模态参数,预示的模态与随后进行的实尺运载火箭模态试验所测到的模态非常一致,进而验证介绍的仿真技术的可靠性;另一个是CZ-2F载人运载火箭全箭模态试验仿真,它为箭船耦合动力学分析提供了可靠数学模型与数据。这两个大型工程应用实例说明了运载火箭模态试验仿真技术的工程实用性。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

国外几种新型微化学推力器

介绍了国外几种以微机电系统 (MEMS)技术为基础的液体和固体微化学推力器。这些新型微化学推力器具有MEMS技术微型化、低成本和批量生产的优点 ,并考虑了体积限制和高度集成等空间限制 ,能产生 10 -6～ 10N·s的推力脉冲 ,可用于微型卫星和纳米卫星的姿态调整、变轨和定向的精确控制。同时阐述了这几种微推力器结构特点和制造工艺 ,并与其他类型的推进器进行了比较     

一种新的星模式识别算法

研究了面向星敏感器的星模式识别算法。首先扼要介绍了到目前为止出现的所有面向星敏感器的星模式识别算法和星图预处理，然后详细论述了本文提出的基于旋转和比例不变点特征松弛匹配算法的一种新的面向星敏感器的星模式识别算法。在第三部分通过仿真试验检验了新算法的性能。初步的仿真试验结果表明该星模式识别算法性能优良，具有实用价值。最后讨论了待深入研究的问题。