某型飞机后边条焊接盒段优化研究

某型飞机后边条焊接盒段是用于安装平尾的重要受力构件,由材料为30CrMnSiA的板弯件、机加件及加强筋焊接组合而成。由于盒段焊缝数量多、零件壁厚薄,故在组合焊接时容易出现焊接变形、变形后校形困难等问题,使焊缝质量难以保证。本文对焊接盒段结构方案进行了优化研究,在最终选定的结构优化方案中,其盒段壁板为整体机加成型,大量采用机械连接,焊缝数量少,焊接形式简单,缩短了盒段的焊接周期,改善了焊接盒段生产的工艺性,满足了该型号飞机的批产要求。     

某型压差活门的动态特性分析

压差活门是航空发动机数控系统燃油计量装置中重要的液压部件,其稳定性和动态性能直接影响控制系统的整体性能。根据压差活门非线性微分方程,采用小偏差线性化方法,推导出了压差活门的动态数学模型,得到了压差活门的方框图以及传递函数。选取某压差活门参数建立了Simulink仿真模型,分别在频域和时域分析了其动态性能。结果表明:在频域上,比较了有无节流器时的回路增益函数伯德图,认为敏感油路上的节流器可以改善稳定性且提高控制精度,通过设计节流器的尺寸可以调节穿越频域,从而改善系统的动态性能;在时域上,分析了不同节流器尺寸下阶跃响应的动态性能,其试验结果与实际工程经验一致。     

反舰导弹换装发动机鉴定飞行试验方案设计

反舰导弹飞行试验的一项重要工作是检验发动机的工作性能及其他设备的匹配等。基于贝叶斯理论,利用数据综合技术设计反舰导弹换装发动机鉴定飞行试验方案,提出了小样本情况下弹上设备的鉴定方法,可为其他弹上设备鉴定提供重要参考。     

GNSS接收机在探月三期中的应用研究

探月工程对飞行器导航系统的性能提出了更高要求,因而有必要研究GNSS(Global Navigation Satellite System,全球导航卫星系统)接收机在探月任务中的应用。以探月工程三期为应用需求,开展地-月-地转移过程中的GNSS接收机可用性分析、GNSS信号特性分析;并针对低信噪比环境下的高灵敏度接收机系统应用进行设计,采用弱信号捕获算法和弱信号跟踪算法实现-175dBW的灵敏度;最终采用基于轨道动力学模型的卡尔曼滤波方法实现了GNSS自主定轨算法。仿真表明:GNSS接收机在60 000km以下的地-月转移和月-地转移弧段能够为探月飞行器提供100m以内位置精度的导航服务。     

锚固站数量及布局对导航星座自主定轨影响分析

针对导航星座自主定轨中的星座整体旋转问题,采用增设少量地面锚固站的方法可有效解决该问题。通过推导星地距离对卫星轨道升交点赤经的偏导数,证明了星地距离对卫星轨道升交点赤经可观。仅考虑在我国大陆范围内布设锚固站的条件下,仿真分析了锚固站数量以及布局对导航星座自主定轨精度的影响。仿真实验结果表明:采用3个以上的锚固站,即可有效控制星座整体旋转,在14d的仿真时段内卫星自主定轨精度保持4m以内;锚固站数量越多,自主定轨精度越高,但随着锚固站数量的增加,自主定轨精度改善程度越来越小;在保持4个锚固站的情形下,采用不同的锚固站布局方案,自主定轨精度并无明显差别。     

民机高速风洞试验的阻力雷诺数效应修正

在飞机设计阶段,获得准确的气动特性数据对设计者是十分重要的,采用缩比模型的风洞试验是主要途径之一。但是风洞条件限制了试验的Re数,从而影响了对跨音速巡航阻力的评估,因此需要对风洞试验结果的阻力进行Re数效应修正。分析了风洞试验结果阻力的误差构成,提出了Re数效应修正的风洞试验数据基础;进一步就跨音速巡航阻力的构成进行分析,论述了对最小阻力和升致阻力分项修正的方法,并对修正结果进行了验证,得到了一种可靠的工程方法。     

耳朵识别身份系统

打击恐怖主义首先要预防恐怖分子,生物识别技术有助于将恐怖分子从人群中识别出来.耳朵是长期保持稳定的一个生物特征,并且耳朵的独特性十分明显.介绍了耳朵识别系统的系统功能和设计思路,采用VC 6.0和SQL SERVER 2000数据库,实现耳朵图像数据采集、图像预处理、图像存储等基本功能.     

Biological degradation and composition of sweet potato biomass - errata

Many challenges are presented by biological degradation in a bioregenerative Controlled Ecological Life Support System as envisioned by the U.S. National Aeronautics and Space Administration. In studies conducted with biodegradative microorganisms indigenous to sweetpotato fields, it was determined that a particle size of 75 microns and incubation temperature of 30°C were optimal for degradation. The composition of the biomass and characterization of plant nutrient solution indicated the presence of potential energy sources to drive microbial transformations of plant waste. Selected indigenous soil isolates with ligno-cellulolytic or sulfate-reducing ability were utilized in biological studies and demonstrated diversity in their ability to reduce sulfate in solution and to utilize alternative carbon sources: a lignin analog 4-hydroxy, 3-methoxy cinnamic acid, cellulose, arabinose, glucose, sucrose, mannitol, galactose, ascorbic acid.     

对PIO预测的A值及A准则的分析

从应用的角度详细地介绍了国外预测PIO时使用A值及A准则的情况。进行了计算公式的推导，讨论了准则在推导过程中所采用的假设及其适用情况，重新整理和校核了计算步骤和算例，以便于推广使用。     

The Role of Magnetic Reconnection in CME Acceleration

Observations carried out from the coronagraphs on board space missions (LASCO/SOHO, Solar Maximum and Skylab) and ground-based facilities (HAO/Mauna Loa Observatory) show that coronal mass ejections (CMEs) can be classified into two classes based on their kinematics evolution. These two classes of CMEs are so-called fast and slow CMEs. The fast CME starts with a high initial speed that remains more or less constant; it is also called the constant-speed CME. On the other hand, the slow CME starts with a low initial speed, but shows a gradual acceleration; it is also called the accelerated and slow CME. Low and Zhang [Astrophys. J. 564, L53–L56, 2002] suggested that these two classes of CMEs could be a result of a difference in the initial topology of the magnetic fields associated with the underlying quiescent prominences. A normal prominence magnetic field topology will lead to a fast CME, while an inverse quiescent prominence results in a slow CME, because of the nature of the magnetic reconnection processes. In a recent study given by Wu et al. [Solar Phys. 225, 157–175, 2004], it was shown that an inverse quiescent prominence magnetic topology also could produce a fast CME. In this study, we perform a numerical MHD simulation for CMEs occurring in both normal and inverse quiescent prominence magnetic topology. This study demonstrates three major physical processes responsible for destabilization of these two types of prominence magnetic field topologies that can launch CMEs. These three initiation processes are identical to those used by Wu et al. [Solar Phys. 225, 157–175, 2004]. The simulations show that both fast and slow CMEs can be initiated from these two different types of magnetic topologies. However, the normal quiescent prominence magnetic topology does show the possibility for launching a reconnection island (or secondary O-line) that might be thought of as a “CME’’.