燃气作动筒式折叠弹翼展开过程分析

为模拟某巡航导弹齿轮-齿条传动作动筒式弹翼展开过程,采用Cook高压气体状态方程计算作动筒内弹道性能,并耦合运动几何关系求解弹翼展开行程。分析得出,弹翼展开过程分为4个阶段,主要影响阶段为展开停滞阶段,并揭示出影响停滞阶段的主要因素。最后,采用C++Builder编制工程实用软件,与试验结果对比表明,该软件可模拟弹翼展开过程,有一定的工程实用价值。     

一种基于OPTICS聚类的仅测角导航目标检测算法

仅测角自主导航方法具有设备简单、复杂度低,功耗低的优点,在空间任务中具有广泛的应用前景.针对中远距离下空间目标特征少的特点,提出了一种利用基于OPTICS聚类算法的空间目标检测方法,可用于仅测角导航过程中的目标检测.对原始星图进行预处理提取星点及目标点,并结合星图识别的结果选择部分帧,使用经过改进的OPTICS聚类方法获得目标运动轨迹.最后,使用本文中的算法对软件仿真出的含有目标的高精度星图进行处理验证了算法的可行性.在卫星相对于空间目标抵近过程中,目标检测的水平误差及垂直误差小于0.15°的帧数分别占到了85.4%以及99.6%.相比AVANTI实验中的目标检测方法,减少了在轨任务中相关参数的调节,进一步提升了算法的自主性.     

多轴疲劳寿命分析方法在飞机结构上的应用

针对飞机结构上常见的处于多轴应力应变(比例多轴)状态下的典型结构,采用3种多轴疲劳寿命分析模型,对该结构的疲劳危险部位进行疲劳寿命分析,并与单轴寿命分析方法的分析结果、疲劳试验结果进行了对比分析。首先对该结构进行细节有限元计算,确定结构的应力分布与应力水平,当载荷施加到88%的最大一级的峰值载荷时,疲劳危险部位的孔边即出现显著的塑性应变,因此,选用低周疲劳(LCF)寿命预测模型进行分析。选取的3种分析模型均是基于临界面的分析模型,分别是Wang-Shang模型、Smith-Watson-Topper(SWT)模型以及Morrow-Brown-Miller模型。为验证分析模型工程适用性,开展了该结构的多轴疲劳试验。与试验结果相比,3种分析模型的预测结果均偏大,其中Wang-Shang模型的预测结果最接近试验值,适用于本文这类结构;SWT模型和Morrow-Brown-Miller模型的预测结果误差相对较大。对于处于多轴载荷状态下的结构,应按照多轴疲劳寿命分析方法进行寿命预测,单轴疲劳寿命分析方法将给出过于危险的评定结果。      

硅溶胶对钙基膨润土性能影响

对硅溶胶改性钙基膨润土的研究结果表明:硅溶胶/膨润土(质量比)小于1/8时,膨润土的吸附性和悬浮性随着硅溶胶加入量的增加而提高,进一步增加硅溶胶的加入量反而下降,膨胀性持续降低;pH值对硅溶胶改性效果影响不大;随焙烧温度的升高,膨润土的吸附性和膨胀性呈先上升后下降的趋势,悬浮性提高,500℃焙烧土综合性能最佳;硅溶胶改性500℃焙烧后膨润土的性能更好。差热分析表明,600~700℃焙烧膨润土失去晶格羟基,综合性能降低;扫描电镜观察说明,硅溶胶改性后膨润土颗粒分散性较好;X-射线衍射和透射电镜分析证实了带负电的硅溶胶主要结合在蒙脱石端面上。     

第二类对称三对角矩阵逆特征值问题及其应用

本文研究如下问题: 问题Ⅰ 给定n×2实矩阵X和实对角矩阵A=diag(λ_1,λ_2),求第二类n×n实对称三对角矩阵T使得TX=XA。 问题Ⅱ 给定第二类n×n实对称三对角矩阵(?),求第二类对称三对角矩阵(?)使得,其中S_T是问题Ⅰ的解集合。 本文给出了问题Ⅱ有解的充分必要条件,研究了问题Ⅱ解的存在性和唯一性,给出了问题Ⅰ和问题Ⅱ解的表达式,描述了求解问题Ⅰ和问题Ⅱ的数值方法,讨论了数值方法的应用,并给出了一些数值例子。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

一种新型的现代战机复合导引律研究

针对现代战机近距空战导引过程,建立了战机与目标的相对运动模型。应用滑模变结构控制理论,以拦截时间、视线角速率和指令加速度变化率为性能指标,推导出一种增广比例加滑模变结构的新型复合导引律,给出了其设计机理,并在理论上对变参数进行了优化设计。仿真结果表明,该导引律结构简单,能有效克服目标机动,在具有较强鲁棒性的同时,其导引性能较传统的PPN有较大提高,具有工程可实现性和有效性。     

环控系统减少引气量和降低燃油代偿损失研究

随着能源问题越来越突出,降低环控系统燃油代偿损失显得越来越重要。针对这个问题,综述了当前应用研究中降低燃油代偿的不同方法,并重点对闭式循环制冷系统和考虑载荷因子的引气系统在减少引气量和降低燃油代偿损失方面进行了探讨。     

发射脉冲载波泄漏抑制研究与实现

对发射端采用双平衡正交调制器产生线性调频造成载波泄漏的原因进行了详细分析,提出了采用直接数字合成(DDS)技术产生发射端线性调频信号的实现方法,从而很好地解决了载波泄漏的问题,并给出了试验结果。     

一种中心型间断有限元MMALE方法

针对多介质可压缩流体动力学问题,提出了一种单元中心型二维MMALE(Multi-Material Arbitrary Lagrangian-Eulerian)方法.在拉氏步,流体力学方程组采用中心型间断有限元方法求解.对于混合网格,采用Tipton压力松弛模型更新物理量,用等参坐标法更新物质中心点坐标.界面重构采用一种...