CTACTS Charleston Tactical Aircrew Combat Training System

This paper presents an overview of the Ocean Engineering and Construction Project Office (FPO-1) of the Chesapeake Division, Naval Facilities Engineering Command design and construction of eight ocean towers. These towers are for the Charleston Tactical Aircrew Combat Training System (CTACTS). The offshore portion of the CTACTS provides the necessary facilities to accurately monitor and control the training of Navy, Marine Corps, and Air Force pilots, during aerial warfare training exercises. These offshore facilities are located 30 to 72 nautical miles east of northern Georgia in water depths ranging from 81 to 143 feet. In June, 1984, FPO-1 awarded the ocean tower design contract to Brown & Root Development, Inc. The final design was completed in August, 1985 and in January, 1986, FPO-1 awarded a contract to McDermott Marine Construction to fabricate and install the platforms. The installation is scheduled to be completed by mid-September, 1986.     

Radiance calibration of CRISTA-NF

The CRISTA-NF instrument is the airborne version of the CRISTA satellite infrared limb sounder. It has been successfully flown on the Geophysica research airplane during a test campaign in July 2005, during the SCOUT-O3 Tropical Aircraft Campaign in November/December 2005 and during the AMMA campaign in August 2006. Radiance calibrations of the airborne instrument are more complex compared to the satellite instrument because the vacuum shell of CRISTA-NF is confined by a ZnSe (zinc–selenide) window and the detectors can thermally drift during measurement flights. By comprehensive radiance calibrations with a blackbody source the window’s emissivity and transmissivity are determined and the dependence of the instrument sensitivity on the detector temperature is characterized. Taking these effects into account, the remaining radiance error of the calibration is smaller than 3%.     

Additional historical solid rocket motor burns

The use of orbital solid rocket motors (SRM) is responsible for the release of a high number of slag and Al₂O₃ dust particles which contribute to the space debris environment. This contribution has been modeled for the ESA space debris model MASTER (Meteoroid and Space Debris Terrestrial Environment Reference). The current model version, MASTER-2005, is based on the simulation of 1076 orbital SRM firings which mainly contributed to the long-term debris environment. SRM firings on very low earth orbits which produce only short living particles are not considered. A comparison of the modeled flux with impact data from returned surfaces shows that the shape and quantity of the modeled SRM dust distribution matches that of recent Hubble Space Telescope (HST) solar array measurements very well. However, the absolute flux level for dust is under-predicted for some of the analyzed Long Duration Exposure Facility (LDEF) surfaces. This indicates that some past SRM firings are not included in the current event database. Thus it is necessary to investigate, if additional historical SRM burns, like the retro-burn of low orbiting re-entry capsules, may be responsible for these dust impacts. The most suitable candidates for these firings are the large number of SRM retro-burns of return capsules. This paper focuses on the SRM retro-burns of Russian photoreconnaissance satellites, which were used in high numbers during the time of the LDEF mission. It is discussed which types of satellites and motors may have been responsible for this historical contribution. Altogether, 870 additional SRM retro-burns have been identified. An important task is the identification of such missions to complete the current event data base. Different types of motors have been used to de-orbit both large satellites and small film return capsules. The results of simulation runs are presented.     

Comparison of solar soft X-ray irradiance from broadband photometers to a high spectral resolution rocket observation

The solar soft X-ray (XUV; 1–30 nm) radiation is highly variable on all time scales and strongly affects the ionosphere and upper atmosphere of Earth, Mars, as well as the atmospheres and surfaces of other planets and moons in the solar system; consequently, the solar XUV irradiance is important for atmospheric studies and for space weather applications. While there have been several recent measurements of the solar XUV irradiance, detailed understanding of the solar XUV irradiance, especially its variability during flares, has been hampered by the lack of high spectral resolution measurements in this wavelength range. The conversion of the XUV photometer signal into irradiance requires the use of a solar spectral model, but there has not been direct validation of these spectral models for the XUV range. For example, the irradiance algorithm for the XUV Photometer System (XPS) measurements uses multiple CHIANTI spectral models, but validation has been limited to other solar broadband measurements or with comparisons of the atmospheric response to solar variations. A new rocket observation of the solar XUV irradiance with 0.1 nm resolution above 6 nm was obtained on 14 April 2008, and these new results provide a first direct validation of the spectral models used in the XPS data processing. The rocket observation indicates very large differences for the spectral model for many individual emission features, but the differences are significantly smaller at lower resolution, as expected since the spectral models are scaled to match the broadband measurements. While this rocket measurement can help improve a spectral model for quiet Sun conditions, many additional measurements over a wide range of solar activity are needed to fully address the spectral model variations. Such measurements are planned with a similar instrument included on NASA’s Solar Dynamics Observatory (SDO), whose launch is expected in 2009.     

CRB: Sinusoid-Sources' Estimation using Collocated Dipoles/Loops

This work derives new asymptotic Cram?r-Rao lower bounds (CRB) for the estimation of multiple pure-tone incident signals' azimuth-elevation arrival-angles, polarization parameters, frequencies, amplitudes, and temporal phases—based on data collected by spatially collocated but orthogonally oriented dipoles and/or loops. The incident sources are pure-tones at distinct, deterministic but unknown frequencies, in contrast to the case of all incident sources at one common known frequency, as has been investigated in the existing research literature on the CRB for diversely-polarized direction-finding. The derived CRBs are closed-form expressions, explicitly in terms of the signal parameters. The new CRBs presented here reveal how a constituent dipole and/or loop's presence and orientation may affect estimation precision, thereby offering guidelines to the system engineer on what dipole(s) and/or loop(s) to include or to omit in constructing the electromagnetic vector-sensor.     

Outskirts of Galaxy Clusters

Until recently, only about 10 % of the total intracluster gas volume had been studied with high accuracy, leaving a vast region essentially unexplored. This is now changing and a wide area of hot gas physics and chemistry awaits discovery in galaxy cluster outskirts. Also, robust large-scale total mass profiles and maps are within reach. First observational and theoretical results in this emerging field have been achieved in recent years with sometimes surprising findings. Here, we summarize and illustrate the relevant underlying physical and chemical processes and review the recent progress in X-ray, Sunyaev–Zel’dovich, and weak gravitational lensing observations of cluster outskirts, including also brief discussions of technical challenges and possible future improvements.     

Development of a thin section device for space exploration: Rock cutting mechanism

We have developed a rock cutting mechanism for in situ planetary exploration based on abrasive diamond impregnated wire. Performance characteristics of the rock cutter, including cutting rate on several rock types, cutting surface lifetime, and cut rock surface finish are presented. The rock cutter was developed as part of a broader effort to develop an in situ automated rock thin section (IS-ARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. The rock cutting mechanism may also be useful to other planetary science missions with in situ instruments in which sub-sampling and rock surface preparation are necessary.     

Moon first versus flexible path exploration strategies: Considering international contributions

This paper analyses potential future collaborative space exploration architectures in terms of 1) the technical capabilities of contributing partners; and 2) the constraints imposed by internal and international politics. We find that when international partners are considered endogenously, the argument for a “flexible path” approach is weakened substantially. This is because international contributions can make “Moon first” economically feasible; and characteristics of proposed “flexible path” approaches may preclude international involvement because of the disproportionate risk that those contributions inherently bear. This could have serious implications for future collaborations. We also note that while there are multiple feasible collaborative architectures, there is currently substantial overlap among the potential niche contributions identified by the international partners.     

Towards a Global Unified Model of Europa’s Tenuous Atmosphere

Despite the numerous modeling efforts of the past, our knowledge on the radiation-induced physical and chemical processes in Europa’s tenuous atmosphere and on the exchange of material between the moon’s surface and Jupiter’s magnetosphere remains limited. In lack of an adequate number of in situ observations, the existence of a wide variety of models based on different scenarios and considerations has resulted in a fragmentary understanding of the interactions of the magnetospheric ion population with both the moon’s icy surface and neutral gas envelope. Models show large discrepancy in the source and loss rates of the different constituents as well as in the determination of the spatial distribution of the atmosphere and its variation with time. The existence of several models based on very different approaches highlights the need of a detailed comparison among them with the final goal of developing a unified model of Europa’s tenuous atmosphere. The availability to the science community of such a model could be of particular interest in view of the planning of the future mission observations (e.g., ESA’s JUpiter ICy moons Explorer (JUICE) mission, and NASA’s Europa Clipper mission). We review the existing models of Europa’s tenuous atmosphere and discuss each of their derived characteristics of the neutral environment. We also discuss discrepancies among different models and the assumptions of the plasma environment in the vicinity of Europa. A summary of the existing observations of both the neutral and the plasma environments at Europa is also presented. The characteristics of a global unified model of the tenuous atmosphere are, then, discussed. Finally, we identify needed future experimental work in laboratories and propose some suitable observation strategies for upcoming missions.