On Increasing Usable MTI Filter Bandwidth by Removing Linear-Phase Constraint

It has been shown in the literature that the linear-phase constraint of finite-duration impulse-response (FIR) digital filters can, under certain circumstances, be effectively traded either for a better filter amplitude response or a reduction in the number of filter coeficients. It is shown that such a tradeoff can be exploited for moving target indicator (MTI) radar signal processors to increase the usable bandwidth for target detection. Although it is demonstrated that the increase is significant for narrowband (ground) clutter, it is negligible for wideband (weather) clutter.     

The Effect of Differential Time Delays in the LMS Feedback Loop

The effect of differential time delay in the feedback loops of an LMS adaptive array is examined. Differential time delay is shown to have two effects on array performance. First, it causes the weights to oscillate during weight transients. Second, it degrades the output signal-to-interference-plus-noise ratio (SINR) from the array. Weight oscillation occurs when the phase shifts in the LMS loop are not matched at the signal carrier frequency. SINR degradation depends on signal bandwidth: the wider the bandwidth, the larger the degradation.     

Capillary brazing under microgravity (TEXUS-II) and 1g conditions

Experiments of vacuum brazing under both microgravity and 1-g conditions show the effect of hydrostatic pressure on ga-filling. The absence of buoyancy forces under microgravity affects the microstructure of the solidified braze in the joint.     

Recent developments in space-borne zodiacal light photometry

The 1985 International Solar Polar Mission will provide the first opportunity to perform measurements from out of the ecliptic and from above the solar poles. Included in this mission is the Zodiacal Light/Background Starlight Experiment of the Ruhr-University Bochum, FRG (in collaboration with the State University of New York at Albany). The experiment is based on the use of a multicolor, sky-scanning photopolarimeter, which will be carried on the NASA S/C.The scientific objectives of the experiment are to investigate the intensity, polarization, and color of the diffuse sky brightness and determine the spatial distribution and physical properties of the interplanetary dust, including a possible interstellar component, as a function of S/C position in and out of the ecliptic.The instrument will allow simultaneous measurements in two separate wavelength bands. Measurements will be performed at 180, 220, 240, 280, 320, 350, 360, 440, 540, 640, 800 nm, including the state of polarization. Two different fields-of-view (1 sq deg and 5.6 sq deg) can be selected.The use of a microprocessor system in the instrument electronics will provide flexibility in measurement sequences and programs, on-board data processing and data quality control.     

IRAS observations of cometary dust

The large beam size of the Infrared Astronomy Satellite (IRAS) focal plane detector array is well suited to measuring the low level thermal emission from cometary dust. Eight comets discovered in 1983 and nine previously known periodic comets were observed by IRAS during its ten month active lifetime. Dust production rates are derived for a wide range of heliocentric distances. Grain properties are inferred from application of simple models to the long wavelength spectral energy distribution.     

Core collapse,bounce aid shock propagation

Recent developments in the physics input for iron core collapse models of type II supernovae are reviewed. The effect of these developments on collapse calculations is also discussed. The inner core collapses homologously, with little change in specific entropy, bounces in the neighborhood of nuclear density, and sets up an outward moving shock. In adiabatic models an explosion may result. The Inclusion of neutrino effects may produce substantial shock damping. Current results indicate that core collapse, bounce and shock propagation does not produce an explosion when neutrino effects are included.     

Design Rules for Adaptive Arrays

The concepts of "equivalent linear arrays" and "minimum effective spacing" can be used to simplify the analysis of planar adaptive arrays. The resulting design rules permit the rapid determination of array configurations without the need for computer modeling.     

A Performance Measure for Evaluating Aircraft Landing Trajectories

A general performance index is developed for evaluating aircraft landing trajectories. The primary term in the index is the effect of noise on people residing near the air terminal. Other terms included are passenger comfort, fuel consumed, and the time spent in the near-terminal area. Models are developed for aircraft engine noise, passenger comfort, the population distribution about a specific airport, and the aircraft flight behavior. While this performance index may be used in computing optimal trajectories, it is also useful for comparing nonoptimal trajectories which, for one reason or another, may be worthy of consideration. Some examples of such comparisons are included through simulations of landing. The aircraft considered is a Boeing 737.     

Application of Endfire Arrays at Contemporary Glide-Slope Problem Sites

The application of the endfire-type, compatible instrument landing system (ILS) glide slope is discussed in the context of providing increased capability to install facilities without requirements for extensive terrain modification. Costs of preparing a site for glide-slope operation can be reduced many times by eliminating the requirement for the usual image-forming ground plane. An example is given where the first endfire glide slope has been installed at an airdrome on a mesa giving a high quality path in space in spite of the limited real estate. Recent flight data from this glide slope are presented.     

Exploration of the solar corona by high resolution solar decametric observations

In this review, current state of knowledge of high resolution observations at decameter wavelengths of the quiet Sun, the slowly varying component (SVC), type I to V bursts and noise storms is summarized. These observations have been interpreted to yield important physical parameters of the solar corona and the dynamical processes around 2R from the photosphere where transition from closed to open field lines takes places and the solar wind builds up. The decametric noise bursts have been classified into (i) BF type bursts which show variation of intensity with frequency and time and (ii) decametric type III bursts. The angular sizes of noise storm sources taking into account refraction and scattering effects are discussed. An attempt has been made to give phenomenology of all the known varieties of decametric bursts in this review. Available polarization information of decametric continuum and bursts has been summarized. Recent simultaneous satellite and ground-based observations of decametric solar bursts show that their intensities are deeply modulated by scintillations in the Earth's ionosphere. Salient features of various models and theories of the metric and decametric noise storms proposed so far are examined and a more satisfactory model is suggested which explains the BF type bursts as well as conventional noise storm bursts at decametric wavelengths invoking induced scattering process for 1 t conversion. Some suggestions for further solar decametric studies from the ground-based and satellite-borne experiments have been made.