Lunar geophysical parameters inversion based on gravity/topography admittance and particle swarm optimization

This paper presents a FORTRAN computer program. The program as code will be used for lunar parameter inversions based on gravity/topography admittance. This will be done by assuming that the lunar lithosphere is modeled as a thin elastic spherical shell. The parameters discussed here include; load ratio, crustal thickness, subsurface load depth, crustal density and elastic lithosphere thickness. The admittance of the best-fitting model can be found through automatically adjusting misfits between one theoretical admittance and an observed one. The results in this paper indicate that this research’s theoretical model is reasonable for exploring the best-fitting parameters. In addition, this code is not only able to automatically and simultaneously calculate the global optimum solution of the parameters studied, but also performs well in computational speed. The code can be easily modified to include more parameter inversions; such as the inversion for subsurface density anomaly and the case of considering infilling material in some lunar mare basins.     

整体构件周向叶片电解加工流场设计及实验

针对整体构件周向叶片的特点与加工难点,设计了带有内置绝缘腔的电解套型加工工具阴极,建立了两种进液方式的流场三维模型,采用有限元法对两种进液方式的流场进行仿真计算。计算结果表明由绝缘腔的叶盆叶背两侧进液并对出液口进行优化的流场方式较好,电解液流速较高且流场较均匀。使用根据有限元仿真结果设计的阴极开展实验,结果表明实验与流场仿真结果相符,采用优化流场模型的加工过程流场稳定,加工效率较高。     

浅析高校房产管理存在的问题及对策

在我国市场经济快速发展的背景下,随着高校校区规模的不断扩张,高校的房产管理工作面临着管理体制改革和服务水平提升的双重挑战。对高校房产管理工作中存在的问题进行了分析,结合高校房产管理工作的实际情况,提出了改进高校房产管理的几点措施。     

扩大斜切式缓冲结构对时速400km铁路隧道口微气压波缓解研究

针对时速400?km高铁隧道口的微气压波研究,建立了基于三维可压缩非定常N?S方程和RNG?k-ε?双方程湍流模型的数值模拟方法,并通过动模型试验对计算方法进行了验证.文中分析了隧道长度、缓冲结构(带斜切的扩大段)长度和缓冲结构开孔数对微气压波的影响.研究结果表明:在一定隧道长度内,微气压波幅值随着隧道长度的增加逐渐增大;隧道口设置带斜切(30°)的等截面扩大段缓冲结构能有效缓解微气压波幅值,且随着缓冲结构的长度增加,微气压波幅值的缓解率先增大后减小,其中缓冲结构长88.56?m时缓解效果最佳,缓解率可达59.2％;该缓冲结构开孔后能进一步缓解微气压波幅值,缓冲结构开2个孔时的缓解效果最佳,缓解率可达70.9％.本文提出的缓冲结构能使得5?km及以下长度隧道的微气压波幅值达到国家规定标准,研究成果对时速400?km/h高速铁路隧道口缓冲结构的设计具有参考价值.     

Accuracy analysis of GNSS-IR snow depth inversion algorithms

In recent years, with the continuous development of Global Navigation Satellite System (GNSS), it has been applied not only to navigation and positioning, but also to Earth surface environment monitoring. At present, when performing GNSS-IR (GNSS Interferometric Reflectometry) snow depth inversion, Lomb-Scargle Periodogram (LSP) spectrum analysis is mainly used to calculate the vertical height from the antenna phase center to the reflection surface. However, it has the problem of low identification of power spectrum analysis, which may lead to frequency leakage. Therefore, Fast Fourier Transform (FFT) spectrum analysis and Nonlinear Least Square Fitting (NLSF) are introduced to calculate the vertical height in this paper. The GNSS-IR snow depth inversion experiment is carried out by using the observation data of P351 station in PBO (Plate Boundary Observatory) network of the United States from 2013 to 2016. Three algorithms are used to invert the snow depth and compared with the actual snow depth provided by the station 490 in the SNOTEL network. The observations data of L1 and L2 bands are respectively used to find the optimal combination between different algorithms further to improve the accuracy of GNSS-IR snow depth inversion. For L1 band, different snow depths correspond to different optimal algorithms. When the snow depth is less than 0.8 m, the inversion accuracy of NLSF algorithm is the highest. When the snow depth is greater than 0.8 m, the inversion accuracy of FFT algorithm is higher. Therefore, according to the different snow depth, a combined algorithm of NLSF + FFT is proposed for GNSS-IR snow depth inversion. Compared with the traditional LSP algorithm, the inversion accuracy of the combined algorithm is improved by 10%. For L2 band data, the results show that the accuracy of snow depth inversion of various algorithms do not change with the variations of snow depth. Among the three single algorithms, the inversion accuracy of FFT algorithm is better than that of LSP and NLSF algorithms.     

基于热力耦合层合板雷击损伤特性分析

为研究复合材料层合板在雷电流作用下的烧蚀损伤力学特性,建立复合材料雷击热力耦合有限元分析模型,与文献实验结果对比验证模型的有效性。根据Hashin三维失效准则编写用户材料子程序,分别得出层合板雷击烧蚀区域周围出现的力学损伤、各层力学损伤分布以及首层在不同方向上的应力分布,分析得出层合板的烧蚀损伤随雷电流持续时间的变化规律。结果表明:由于存在较高的温度梯度,导致层合板出现较大的热膨胀应力,进而导致层合板内部产生各种力学损伤,即基体开裂、分层及纤维断裂;雷击电流施加时间、峰值电流与温度场均对层合板烧蚀面积产生较大的影响。     

基于声学黑洞效应的直升机驾驶舱宽带降噪

声学黑洞（ABH）效应是利用结构阻抗的变化，使结构中传播的波相速度和群速度发生变化，在结构局部区域实现波的聚集，进而通过少量阻尼将能量耗损。该方法具有高效、轻质、宽频等优点，为结构振动噪声控制提供了新的思路，具有较强的潜能和应用前景。本文针对直升机驾驶舱复杂的噪声问题，根据噪声源和传递路径，提出基于ABH效应的内嵌式和附加式2种减振降噪设计方案。利用有限元软件建立了结构声振耦合模型，分析了直升机驾驶舱模型的声振特性，解释了ABH效应有助于降低舱室噪声的机理，并搭建了实验平台，开展了效果测试和性能评估。结果表明，内嵌式ABH结构可以有效降低舱内的中高频噪声，而低频控制能力略显不足。附加式ABH结构可以弥补这一局限性，拓宽有效频带。结合内嵌式和附加式ABH 2种控制方案，相比传统结构在总质量不增加甚至略有降低的前提下，舱室平均噪声水平在1/3倍频程内降低3~10 dB。该研究成果有助于推进ABH新技术在未来直升机工程减振降噪中的应用。     

不同喷铝参数对复合材料雷击防护性能模拟

为了研究复合材料不同的雷击防护(lightning strike protection,LSP)系统在雷电流作用下的损伤规律,对雷击损伤过程和烧蚀机理进行分析,建立复合材料层合板雷击防护的能量平衡数学模型。在此基础上,在ABAQUS中建立复合材料基准件、全喷铝和局部喷铝防护系统的碳纤维增强复合材料(carbon fiber reinforced polymer,CFRP)层合板电-热耦合有限元模型,和实验结果对比验证模型的有效性,对雷击烧蚀损伤特征进行分析,并引入雷击烧蚀损伤指数DI,得出三种不同模型在不同铝涂层厚度、不同峰值雷电流作用下的烧蚀损伤规律,并对两种不同的局部喷铝防护系统下复合材料的损伤特征进行对比分析。结果表明:雷击防护系统下复合材料的烧蚀损伤面积和铝涂层厚度关系进行函数拟合,两者均满足幂函数关系。     

广义轨道根数空间的轨道机动可达性

在由动量矩矢量和偏心率矢量定义的广义轨道根数度量空间内,研究了在初始轨道的任意点施加幅值固定的单脉冲后卫星的可达区域,包括脉冲施加的位置任意、方向固定和位置固定、方向任意2种情况,给出了广义轨道根数空间中轨道机动的可达性判据.通过比较脉冲作用前后的广义轨道根数,评估了单脉冲对广义轨道根数的影响,并且利用数值仿真分析了脉冲作用位置、方向与广义轨道根数空间中度量的关系.最后,在广义轨道根数空间中给出了轨道到轨道的机动策略,验证了广义轨道根数的可行性.