基于子阵级非周期的有限扫描阵列研究

对基于子阵级非周期的有限扫描阵列进行研究,采用数值仿真和遗传算法对基于不同子阵规模的非周期阵列进行优化设计,分析4?4和2?2两种子阵规模对接收多波束应用中伴随波束方向图的影响,研究表明子阵规模过大会引起伴随波束方向图的旁瓣抬升,通过减小子阵规模可以避免该问题,论证了设计的基于2?2子阵的非周期八角阵可应用于有限视场扫描相控阵中。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

Electron density inversed by plasma lines induced by suprathermal electron in the ionospheric modification experiment

Incoherent scatter radar (ISR) is the most powerful ground-based measurement facility to study the ionosphere. The plasma lines are not routinely detected by the incoherent scatter radar due to the low intensity, which falls below the measured spectral noise level of the incoherent scatter radar. The plasma lines are occasionally enhanced by suprathermal electrons through the Landau damping process and detectable to the incoherent scatter radar. In this study, by using the European Incoherent Scatter Association (EISCAT) UHF incoherent scatter radar, the experiment observation presents that the enhanced plasma lines were observed. These plasma lines were considered as manifest of the suprathermal electrons generated by the high-frequency heating wave during the ionospheric modification. The electron density profile is also obtained from the enhanced plasma lines. This study can be a promising technique for obtaining the accurate electron density during ionospheric modification experiment.     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

民用飞机副翼舱结构振动疲劳寿命预计

副翼舱是民用飞机重要部件之一,主要作用为连接副翼并对安装副翼提供支持,将副翼的气动载荷传递到主翼盒上。当受到气动力及其他激励时副翼舱结构产生结构振动响应。副翼舱结构振动疲劳寿命需满足民用飞机适航条款要求,为表明满足适航条款符合性,对随机动载荷激励下副翼舱结构进行振动疲劳寿命预计具有重要意义。以民用飞机副翼舱结构为研究对象,基于试飞实测应变数据、金属材料的随机振动S-N曲线和改进声疲劳寿命估算法,提出了一种适用于振动疲劳寿命预计的工程处理方法。通过飞行试验、有限元仿真、数据分析等相结合的方法进行副翼舱结构优化前后的振动疲劳寿命预计。副翼舱结构优化前损伤位置预测寿命最低为59飞行小时,符合实际损伤位置寿命情况。副翼舱结构优化后应力水平明显降低,寿命满足要求。结果表明：基于实测数据的副翼舱结构振动疲劳寿命预计方法有效,可作为振动疲劳寿命预计的工程处理方法。     

飞机锁类机构性能退化可靠性分析方法综述

随着航空航天装备的快速发展,对飞行器装备的可靠性要求逐渐提高,飞机锁类机构的可靠性对飞机起降的安全至关重要。以飞机舱门锁机构为研究对象,首先通过文献调研了大量舱门锁机构并分析了锁机构的特点和失效模式,阐述了锁机构的工作原理。其次综述了锁机构失效机理建模、机构渐变损伤的研究现状以及目前存在的问题,分析了国内外有关锁机构可靠性的研究现状;并针对多连杆机构可靠性分析和锁机构可靠性分析进行了分类梳理。最后对锁机构的可靠性分析研究思路进行总结,并对目前复杂锁机构的可靠性分析存在的问题及其研究趋势进行了展望。     

以可用度为目标的民用飞机不完全预防性维修间隔优化

民用飞机制造商推荐的初始预防性维修间隔通常不考虑运营环境和维修能力的差异,在满足飞机安全性要求的同时,难以达到可用性的最优状态。基于不完全维修理论,采用役龄回退因子修正部件的可靠性模型,以反映维修工作对于部件性能的影响;结合航空公司运行实际情况,以部件可用度为目标函数,可靠度阈值为约束条件,提出不完全维修策略下的预防性维修间隔优化模型,并以某型飞机的空气起动机航线故障数据进行实例验证。结果表明：在满足可靠度阈值的约束条件下,所建立的维修间隔优化模型得出的最优维修间隔与实际相符,该模型合理可行。     

临界反应距离法微细电化学高效加工大长径比微电极

提出了一种基于临界反应距离控制的微细电化学（μ-ECM）在线高效制备大长径比微电极方法,旨在解决大长径比微电极制备难题。采用强碱性电解液及微秒级电源,实现了钨电极的微米级精度可控去除。分析了微细电化学加工材料去除微观过程,仿真分析了两极距离变化条件下间隙电流密度变化,确定了基于临界反应距离精确控制材料去除的参数选择范围。建立了电极材料蚀除过程数学模型,得到了材料蚀除量的变化规律。进行了系统的工艺实验,研究了电压、脉宽、电解液浓度对微细电极材料去除率的影响规律。采用优化的工艺参数,得到了直径10μm、长径比大于200的微细电极,材料去除率最高可达2.7×10^-2 mm³/min,加工效率较目前主流方法提高一个数量级。     

固体火箭发动机专用ICT机械扫描系统

以成熟的组合精密镗床为本体, 研制了固体发动机专用ＩＣＴ机械扫描系统。采用４５０ ｋＶ Ｘ射线源, 设计了准直器系统、探测器系统、机械扫描系统（传动控制系统、夹具及同步台）, 实测证明扫描系统符合精度要求