基于TDRSS的低轨卫星定轨方法研究

利用跟踪与数据中继卫星系统(TDRSS)组成天基测控系统对低轨卫星进行轨道确定,并讨论了低轨卫星在TDRSS系统覆盖区域的时间段,以改进的Gauss-Newton算法为基础,设计了非线性迭代的微分轨道改进算法,有效抑制了算法截断误差.仿真实验证明基于TDRSS的测控技术可显著提高测控覆盖率,减少地面测控站压力,有效确定低轨卫星轨道,定轨位置误差小于20 m,速度误差小于0.01 m/s,能满足一般低轨卫星的定轨精度要求.     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

克服天线罩瞄准误差影响的一种鲁棒导引控制器设计方法

本文首先分析了某类导弹系统的稳定性，然后对天线罩瞄准线误差斜率Ａ的摄动对寻的制导控制系统稳定性的影响进行了研究。在此基础上，文章提出了鲁棒导引控制器的设计方法。仿真结果表明，按此方法设计出的控制器对于Ａ的摄动具有满意的鲁棒性，该方法在某类导弹控制系统的设计中得到应用，效果良好。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

红外型空空导弹智能制导律研究

本文论述了红外型空空导弹应用智能控制的理论基础及结构特点，以多级智能控制的框架和机理设计出以比例导引为主、智能控制为辅的变指令智能制导律，并编制计算机软件以数字仿真的形式验证变指令智能制导规律的有效性和可行性     

具L2有界不确定性扰动系统最优跟踪问题的时域解

本文对Ｌ２有界不确定性扰动下的一性系统在时域提出Ｍａｘｍｉｎ最优跟踪问题，给出了问题的时域状态反馈解，这一问题与相应的Ｈ∞问题具有某种一致性，因此，问题的求解方法可为解决领域不确定系统的Ｈ∞最优跟踪问题提供一种时域途径。     

Phugoid oscillations in optimal reentry trajectories

A major problem with operations of lifting reentry vehicle having an aft center-of-gravity location due to large engine mass at the rear is the required hypersonic trim to fight the desired trajectory. This condition is most severe for lifting maneuvers. As a first step toward analyzing this problem, this paper considers the lift requirement for some basic maneuvers in the plane of a great circle. Considerations are given to optimal lift control for achieving the maximization of either the final altitude, speed or range. For the maximum-range problem, phugoid oscillation along an optimal trajectory is less severe as compared to a glide with maximum lift-to-drag ratio. An explicit formula for the number of oscillations for an entry from orbital speed is proposed.     

NUMERICAL MODELLING OF VELOCITY AND TEMPERATURE DISTRIBUTIONS OF THE BUOYANCY CONVECTION EFFECT IN KNbO3 MELT

Numerical modelling of velocity and temperature fields in high-temperature KNbO3 melt of a loop-shaped Pt wire heater is carried out by using the commercial com putational code ANSYS for the mathematical solution of the governing equations.Based on the experimental boundary conditions and the Boussinesq approximation,the numerical modelling of a steady and two-dimensional model is applied to study the process under consideration of the buoyancy-driven convection condition. The result is compared with the previous experimental and theoretical data obtained in our laboratory, and the former is in agreement with the latter. Thus a theoretical guide for reasonable growth conditions is provided by studying in depth the real fluid flow effects in the crystal growth from the melt.     

基于实数编码的改进遗传算法研究

针对遗传算法运算速度低、容易陷入局部最优值、早熟收敛等缺点,提出了基于实数编码的遗传算法的改进算法,对基于实数编码的遗传算法的选择、交叉、变异算子以及操作方法进行了改进,采用最佳保留选择策略、多算子交叉和变异,并且采用自适应变焦变异,改进后的交叉与变异操作,使算法始终保持了种群的多样性,同时也提高了寻优最终结果的精确性。实验表明基于实数编码的改进遗传算法(R IGA)有效的改善了遗传算法的缺点。