Land mobile satellite propagation experiments in Kyoto City

In February of 1990, land mobile satellite propagation experiments were conducted in Kyoto City, Japan, using the Engineering Test Satellite V (ETS-V). The signal transmitted from the satellite was received and recorded at a mobile unit moving in different streets of the downtown area. The streets chosen have typical downtown medium and high rise buildings, electric utility poles, trees, etc., which caused obstruction to the satellite line of sight. The propagation characteristics such as fade/nonfade distribution, joint fade and nonfade distribution, phase distribution, and their dependence on the antenna type are discussed for the measured link. Error characteristics in digital communication for the above link have been qualitatively analyzed on the basis of the measured signal level fluctuation. Effect of interleaving and coding to improve the communication link is also discussed     

An experimental investigation of three eigen DF techniques

The comparative direction-finding (DF) performance of multiple signal classification (MUSIC), ROOT-MUSIC, and estimation of signal parameters via rotational invariance techniques (ESPRIT) is considered. Data were collected from two target transmitters operating simultaneously. The objective of the experiment was to evaluate multipath resolution capability using measurement precision equivalent to that found in modern radio direction-finding systems     

On the relation between the mass loss rate and the stellar parameters of OB-type stars

We discuss mass loss relations for OB-type stars as a function of luminosity, effective temperature, and mass. We conclude that a simple first order linear regression relation is as good as any other more sophisticated relation, with the advantage that the simple form consumes much less computer time when used in evolutionary codes.     

A localizer design to improve missed approach guidance

A novel VHF localizer system has been designed, built and successfully tested to provide increased reliability and safety of commercial and general aviation air transportation. Additional benefits are more precise tracks for aircraft executing a missed approach, reduced volume of the airspace needed for missed approaches, and reduced sizes of areas affected by noise. The design uses contemporary instrument landing system (ILS) hardware to provide dual independent front and back course directional localizer operation with two carriers in the receiver passband offset 4 kHz from the nominal carrier frequency. An example is given of an application and solution to an ILS problem at Reno, NV. Relevant data are presented     

AC/DC converter topologies for the Space Station

A new class of AC/DC converter topologies (Type-1 converters) is described, suitable for use in an advanced single-phase sine-wave voltage, high-frequency power distribution system, of the type that was proposed for a 20 kHz Space Station primary electrical power distribution system. The converter comprises a transformer, a resonant network, a current controller, a diode rectifier, and an output filter. The input AC voltage source is converted into a sinusoidal current source using the resonant network. The output of this current source is rectified by the diode rectifier and is controlled by the current controller. The controlled rectified current is then filtered by the output filter to obtain a constant voltage across the load. Three distinct converter topologies, Type-1A, Type-1B, and Type 1-C, are described, and their performance characteristics are presented. All three types have a close-to-unity rated power factor (greater than 0.98), low total harmonic distortion in input current (less than 5%), and high conversion efficiency (greater than 96%)     

Multiple target tracking using products of position measurements

The continued development of the symmetric measurement equation (SME) filter for track maintenance in multiple target tracking (MTT) is considered, focusing on the case in which the SMEs are generated by forming sums of products of the original position measurements. The SME filter is developed for the case of N targets whose motions consist of random perturbations about constant-velocity trajectories. It is assumed that measurements of x-coordinate positions are available, and that the number of measurements is equal to the number of targets. Various analytical properties of the SME filter are studied. It is shown that under a very weak condition, the estimation error equation is locally exponentially stable. The performance of the SME filter is investigated by comparing it with an optimal (minimum-variance) estimator and by generating a computer simulation in the six-target case     

Image texture synthesis-by-analysis using moving-average models

A synthesis-by-analysis model for texture replication or simulation is presented. This model can closely replicate a given textured image or produce another image that although distinct from the original, has the same general visual characteristics and the same first and second-order gray-level statistics as the original image. The texture synthesis algorithm, proposed contains three distinct components: a moving-average (MA) filter, a filter excitation function, and a gray-level histogram. The analysis portion of the texture synthesis algorithm derives the three from a given image. The synthesis portion convolves the MA filter kernel with the excitation function, adds noise, and modifies the histogram of the result. The advantages of this texture model over others include conceptually and computationally simple and robust parameter estimation, inherent stability, parsimony in the number of parameters, and synthesis through convolution. The authors describe a procedure for deriving the correct MA kernel using a signal enhancement algorithm, demonstrate the effectiveness of the model by using it to mimic several diverse textured images, discuss its applicability to the problem of infrared background simulation, and include detailed algorithms for the implementation of the model     

An alternate algorithm for discrete-time filtering

The discrete-time Kalman filter is an optimal estimator for the states of a linear, stochastic system. It assumes that measurements are linear combinations of the states, and all disturbances are Gaussian. The influence diagram, a decision analysis tool that provides an algorithm for discrete-time filtering equivalent to the Kalman filter when the influence diagram represents Gaussian random variables, is discussed. The influence diagram algorithm is a factored form of the Kalman filter, similar to other factored forms such as the U-D filter. Compared with the Kalman filter, it offers improved numerical properties. Compared with other factored forms, it offers a reduced computational load     

Large angle pitch attitude maneuver of a satellite using solarradiation pressure

The force exerted by the solar radiation, though very small in magnitude, produces significant effects, especially in the case of high altitude satellites. The solar radiation pressure represents one freely available environmental force that may be put to use for various purposes. This may lead to enhancement of the life of the satellite since it consumes a very nominal amount of on-board energy. The advantages offered by the solar radiation pressure have drawn the attention of several researchers. Various controllers were proposed for many space missions, particularly for attitude control and stabilization of satellites. A controller for achieving large angle pitch attitude maneuver is described. The proposed control law is very simple in its form and requires a minimum number of on-board computations. Varieties of cases are tried and the effect of various parameters is studied     

Performance analysis for DOA estimation algorithms: unification,simplification, and observations

Subspace based direction-of-arrival (DOA) estimation has motivated many performance studies, but limitations such as the assumption of an infinite amount of data and analysis of individual algorithms generally exist in these performance studies. The authors have previously proposed a unified performance analysis based on a finite amount of data and achieved a tractable expression for the mean-squared DOA estimation error for the multiple signal classification (MUSIC). Min-Norm, estimation of signal parameters using rotational invariance techniques (ESPRIT), and state-space realization algorithms. However, this expression uses the singular values and vectors of a data matrix, which are obtained by the highly nonlinear transformation of the singular value decomposition (SVD). Thus the effects of the original data parameters such as numbers of sensors and snapshots, source coherence and separations were not explicitly analyzed. The authors unify and simplify this previous result and derive a unified expression based on the original data parameters. They analytically observe the effects of these parameters on the estimation error