The bimodal magnetosphere and ring current, radiation belt, and tail transducers

It has generally been assumed that a geomagnetic storm is entirely driven by external forces—e.g., solar wind E_y = V_x × B_z, V_x, V²_x (where the components of the electric field, E, the magnetic field, B, and velocity, V, are given in GSE coordinates)—which would imply that particle injections in the ring current (RC) or outer radiation belts should be highly correlated. However the data from ISTP are showing that the magnetosphere can have at least two very different responses to the same solar wind (SW) conditions: a classic, enhanced RC with Dst response, or a 1000-fold increase in the outer radiation belt MeV electrons (ORBE). August 29, October 14 and 23, 1996 are examples of Dst storms, whereas April 15, 1996 and January 10, 1997 are examples of MeV storms. It is this second response that is so deadly to some geosynchronous spacecraft, whereas geomagnetic storms are categorized by the first response. Neither of these appear to be correlated to the SW conditions driving substorms. Why should the SW energy appear in the radiation belts or the ring current independently? We hypothesize that the RC couples to the electric power available (E_y), the ORBE couple to the mechanical power available (V_x), and the Tail couples to the magnetic energy (B_z) available in the SW. The transducer for RC may be subauroral parallel potentials, the transducer for ORBE may be the cusp, while the Tail substorm transducer is yet a third independent mechanism for extracting SW energy. Evidence for this theory comes from the novel POLAR satellite that traverses the cusp, the plasmasheet and the radiation belts.     

Transport of ions in presence of induced electric field and electrostatic turbulence: Source of ions injected into ring current

The transport of ions from the polar ionosphere to the inner magnetosphere during stormtime conditions has been computed using a Monte Carlo diffusion code. The effect of the electrostatic turbulence assumed to be present during the substorm expansion phase was simulated by a process that accelerated the ions stochastically perpendicular to the magnetic field with a diffusion coefficient proportional to the energization rate of the ions by the induced electric field. This diffusion process was continued as the ions were convected from the plasma sheet boundary layer to the double-spiral injection boundary. Inward of the injection boundary, the ions were convected adiabatically. By using as input an O⁺ flux of 2.8 × 10⁸ cm^?2 s^?1 (w > 10 eV) and an H⁺ flux of 5.5 × 10⁸ cm^?2 s^?1 (w > .63 eV), the computed distribution functions of the ions in the ring current were found to be in good agreement, over a wide range in L (4 to 8), with measurements made with the ISEE-1 satellite during a storm. This O⁺ flux and a large part of the H⁺ flux are consistent with the DE satellite measurements of the polar ionospheric outflow during disturbed times.     

Plasma convection model and generation of longitudinal currents in the earth's magnetosphere

The aim of this paper is to investigate processes in the magnetosphere and in particular the problems of the interaction of the solar wind with the Earth's magnetic field to produce large-scale convection, electric fields and longitudinal currents in the magnetosphere. The investigation is carried out in the frame of magnetic hydrodynamics. The reason for such an approach can be found in /1/. When calculating the transfer coefficients, the Böhm approximation is used, i.e. it is considered that the plasma in the near-equatorial part of the magnetosphere (quasiplanar geometry is used in the problem for simplification) is sufficiently turbulent that the condition ωτ ≈ 1 is valid (ω is the Larmor frequency of electrons, τ is effective time between two Quasi-collisions). The main subjects of investigation in this paper are the input near the equatorial boundary layer and the plasma layer of the magnetosphere tail.     

Phase separated membrane bioreactor: results from model system studies.

The operation and evaluation of a bioreactor designed for high intensity oxygen transfer in a microgravity environment is described. The reactor itself consists of a zero headspace liquid phase separated from the air supply by a long length of silicone rubber tubing through which the oxygen diffuses in and the carbon dioxide diffuses out. Mass transfer studies show that the oxygen is film diffusion controlled both externally and internally to the tubing and not by diffusion across the tube walls. Methods of upgrading the design to eliminate these resistances are proposed. Cell growth was obtained in the fermenter using Saccharomyces cerevisiae showing that this concept is capable of sustaining cell growth in the terrestrial [correction of terrestial] simulation.     

Observing the earth radiation budget from satellites: Past,present, and a look to the future

Satellite measurements of the radiative exchange between the planet Earth and space have been the objective of many experiments since the beginning of the space age in the late 1950's. The on-going mission of the Earth Radiation Budget (ERB) experiments has been and will be to consider flight hardware, data handling and scientific analysis methods in a single design strategy. Research and development on observational data has produced an analysis model of errors associated with ERB measurement systems on polar satellites. Results show that the variability of reflected solar radiation from changing meteorology dominates measurement uncertainties. As an application, model calculations demonstrate that measurement requirements for the verification of climate models may be satisfied with observations from one polar satellite, provided we have information on diurnal variations of the radiation budget from the ERBE mission.     

An empirical model of electron density for low and middle latitudes below 200 km

Our empirical model of electron density (n_e) for quiet and weakly disturbed geomagnetic conditions (Kp not greater 4) takes account of comparative analysis of existing models and of experimental data obtained by rockets and incoherent scatter radar. The model describes the n_e distribution in the 80 to 200 km height range at low and middle latitudes, and to some extent, in the subauroral region. It is presented in analytical form thus allowing one to calculate electron density profiles for any time. The electron density distribution at 140 km depends on the season (day of the year) and on the solar zenith angle. Profile variations during the day are for one season shown. Different from other models, ours specifies the variations during sunrise and sunset and reflects the particular profile shape at night admitting the occurrence of an intermediate layer.     

Determination of surface parameters and fluxes for climate studies from space observation. Methods,results and problems

Climate being the result of many interconnected processes, it can hardly be understood without models which describe these various processes as quantitatively as possible and define the parameters which are relevant for climate studies. Among those, surface processes and therefore surface parameters are now recognized to be of great importance. Some examples are discussed in the first part, showing the great interest to measure the relevant parameters on a multi-year basis, over large areas with sufficiently dense array and on a stable basis, in order to monitor climate changes or to study the impact on climate of the modifications of some relevant parameters which are analysed. Since space observations from satellites fulfil these requirements, it is clear that they will become very soon a fundamental tool for climate studies. Unfortunately, as it is discussed in the second part, satellites do measure only spectral radiances at the top of the atmosphere and the determination of the relevant surface parameters (or fluxes) from these radiances still raises many problems which have to be solved, although many progresses have already been made.The aim of this paper is therefore to review and discuss these problems and the various ways they have been tackled until now. The first part is devoted to an overview of what needs to be measured and why, while the existing methods for determining the most important surface parameters from space observations are presented in the second part where a particular attention is given to the theoretical and experimental validations of these methods, their limits and the problems still to be solved.     

A new model of the ion composition at 75 to 1000 km for IRI

Ion composition of the ionosphere is an important parameter of any ionospheric model. The International Reference Ionosphere-1979 includes a program for the relative ion composition computation. The program was constructed on the basis of the Danilov and Semenov /1/ empirical model, which averaged 42 rocket measurements of the ion composition at middle latitudes below 200 km, on “AEROS” satellite measurements, and on Taylor's data /2/ above that altitude.     

Software intensive systems safety analysis

Two important elements in the avionics suite of modern aircraft are: the flight control system (FCS) and the flight management system (FMS). The FCS provides the capability to stabilize and control the aircraft, while the FMS is responsible for flight planning and navigation. A clear trend in the aerospace industry is to place greater reliance on software systems, and many FCS and FMS subsystems are implemented primarily in software. For example, within the FCS is the flight guidance system (FGS) that generates roll and pitch guidance commands. Similarly, within the FMS is the vertical navigation (VNAV) function that acts like a third crew member in the cockpit, ordering mode change requests and resetting target altitude values to enable the aircraft to track the vertical flight plan. We have developed formal, executable models of the requirements for the mode logic of a FGS and for portions of the VNAV functionality. We have also conducted a comprehensive software safety analysis on the FGS mode logic model, and are completing the analysis of the VNAV model. This analysis uses as its starting point several "traditional" safety analysis techniques such as a functional hazard assessment (FHA), a fault tree analysis (FTA), and a failure mode effects analysis (FMEA). However, we are also using formal methods techniques known as model checking and theorem proving to verify the presence of safety properties in the model. This paper summarizes the (now completed) safety analysis that was performed on the FGS model, and highlights the similarities and differences with the (still on-going) safety analysis of the FMS model. In particular, we summarize progress made to date in the use of formal methods to verify the presence of the required safety properties in the models themselves.     

Maps of hydrogen isotopes at low altitudes in the inner zone from sampex observations

The PET instrument aboard the SAMPEX satellite has provided us with long-term intra-calibrated observations of geomagnetically trapped protons and deuterons in the inner zone, suitable for use in constraining the low-altitude portions of radiation belt models being developed as successors to AP-8. These observations have been summarized elsewhere (Looper et al., 1996). Here we report a detection of geomagnetically-trapped tritium at energies from 14 to 35 MeV/nuc below L = 1.2, at about 1/8 the flux of deuterium previously reported at that location and at similar energy per nucleon. We also demonstrate the utility of the SAMPEX/PET observations for measuring the east-west anisotropy in the trapped particle flux at low altitudes, which is due to displacement of particle gyrocenters from the position of observation in a region of strong flux gradients. This anisotropy is implicitly ignored in omnidirectional radiation-flux models, but it can be important to mission planners considering how to distribute shielding over the surface of oriented spacecraft in low Earth orbit.