Application of the parameter-averaging method to calculations of gas ejectors with cylindrical mixing chambers

In this paper, one of the most possible methods for calculations of ejector devices equipped with the cylindrical mixing chambers is considered; the method is based on averaging the flow parameters at the chamber inlet. We present the calculation results and their comparison with the earlier published data, as well as the quantitative assessment of this method and feasibilities of its use for different technical devices embodying the concept of ejection.     

Optimization of a tool kit for machining by methods of graph theory

Some methods of optimizing a cutting tool kit by the minimum labour content criterion in milling of an article are considered. Their advantages and disadvantages are given.     

Heat transfer at various methods of thermal protection in the systems of power-driven gas turbine plants (GTP)

The scheme variants of implementing the thermal protection against heat flows being generated by the body of a high-temperature stationary gas turbine engine (GTE) are presented. The scheme of the experimental bench with a working section is given. Methodical approaches to the heat transfer calculation at different variants of forced and natural convection organization and under various operating conditions are described. The generalized results of the experiments carried out using a heat curtain being generated by porous injection are presented.     

On choice of the blade back profile curvature in transonic turbine cascades

Some design and experimental data on three cascades with the same 12° bending angle for the primary nozzle block of a gas turbine are presented. As is seen from the investigation the most efficient at the transonic velocities of the outward flow are the blades, the back curvature of which in the bevel cut zone decreases to the trailing edge. Also presented is the fact that the blade with the increasing back curvature has noticeably larger losses.     

System sensitivity to parametric variations in the problem of lateral motion flight vehicle control

The results of investigation of dynamic system sensitivity to parametric variations in the channel of flight vehicle lateral motion are presented using the notion of infinitesimal transformation. The exact relationships establishing a link between the structure of parameter deviation and that of system phase coordinate deviation are obtained.     

Optical,ultraviolet, and infrared observations of isolated neutron stars

Forty years passed since the optical identification of the first isolated neutron star (INS), the Crab pulsar. 25 INSs have been now identified in the optical (O), near-ultraviolet (nUV), or near-infrared (nIR), hereafter UVOIR, including rotation-powered pulsars (RPPs), magnetars, and X-ray-dim INSs (XDINSs), while deep investigations have been carried out for compact central objects (CCOs), Rotating RAdio transients (RRATs), and high-magnetic field radio pulsars (HBRPs). In this review I describe the status of UVOIR observations of INSs, their emission properties, and I present the results from recent observations.     

Compact frequency standard using atoms trapped on a chip

We present a compact atomic frequency standard based on the interrogation of magnetically trapped ⁸⁷Rb atoms. Two photons, in the microwave and radiofrequency domain excite the atomic transition. At a magnetic field of 3.23 G this transition from ∣F = 1, m_F = −1〉 to ∣F = 2, m_F = 1〉 is 1st order insensitive to magnetic field variations. Long Ramsey interrogation times can thus be achieved, leading to a projected stability in the low 10⁻¹³ at 1 s. This makes this device a viable alternative to LITE and HORACE as a good candidate for replacing or complementing the rubidium frequency standards and passive hydrogen masers already on board of the GPS, GLONASS, and GALILEO satellites. Here we present preliminary results. We use an atom chip to cool and trap the atoms. A coplanar waveguide is integrated to the chip to carry the Ramsey interrogation signal, making the physics package potentially as small as (5 cm)³. We describe the experimental apparatus and show preliminary Ramsey fringes of 1.25 Hz linewidth. We also show a preliminary frequency stability σ_y = 1.5 × 10⁻¹²τ^−1/2 for 10 < τ < 10³ s. This represents one order of magnitude improvement with respect to previous experiments.     

Characteristics of field line resonance type geomagnetic pulsations and variations of plasmaspheric plasma density distribution

The period of field line resonance (FLR) type geomagnetic pulsations depends on the length of the field line and on the plasma density in the inner magnetosphere (plasmasphere), where field lines are closed. Here as FLR period, the period belonging to the maximum occurrence frequency of the occurrence frequency spectrum (equivalent resonance curve) of pulsations has been considered. The resonance system may be replaced by an equivalent resonant circuit. The plasma density would correspond to the ohmic load. The plasma in the plasmasphere originates from the ionosphere, thus FLR period, occurrence frequency are also affected by the maximum electron density in the ionosphere. The FLR period has shown an enhancement with increasing F region electron density, while the occurrence frequency indicated diminishing trend (possible damping effect). Thus, the increased plasma density may be the cause of the decreased occurrence of FLR type pulsations in the winter months of solar activity maximum years (winter anomaly).     

On the effect of considering more realistic particle shape and mass parameters in MMOD risk assessments

One of the primary mission risks tracked in the development of all spacecraft is that due to micro-meteoroids and orbital debris (MMOD). Both types of particles, especially those larger than 0.1 mm in diameter, contain sufficient kinetic energy due to their combined mass and velocities to cause serious damage to crew members and spacecraft. The process used to assess MMOD risk consists of three elements: environment, damage prediction, and damage tolerance. Orbital debris risk assessments for the Orion vehicle, as well as the Shuttle, Space Station and other satellites use ballistic limit equations (BLEs) that have been developed using high speed impact test data and results from numerical simulations that have used spherical projectiles. However, spheres are not expected to be a common shape for orbital debris; rather, orbital debris fragments might be better represented by other regular or irregular solids. In this paper we examine the general construction of NASA’s current orbital debris (OD) model, explore the potential variations in orbital debris mass and shape that are possible when using particle characteristic length to define particle size (instead of assuming spherical particles), and, considering specifically the Orion vehicle, perform an orbital debris risk sensitivity study taking into account variations in particle mass and shape as noted above. While the results of the work performed for this study are preliminary, they do show that continuing to use aluminum spheres in spacecraft risk assessments could result in an over-design of its MMOD protection systems. In such a case, the spacecraft could be heavier than needed, could cost more than needed, and could cost more to put into orbit than needed. The results obtained in this study also show the need to incorporate effects of mass and shape in mission risk assessment prior to first flight of any spacecraft as well as the need to continue to develop/refine BLEs so that they more accurately reflect the shape and material density variations inherent to the actual debris environment.     

Normalized ionization yield function for various nuclei obtained with full Monte Carlo simulations

Several recent results important for production of ion pairs in the Earth atmosphere by various primary cosmic ray nuclei are presented. The direct ionization by various primary cosmic ray nuclei is explicitly obtained. The longitudinal profile of atmospheric cascades is sensitive to the energy and mass (charge) of the primary particle. In this study different cosmic ray nuclei are considered as primaries, namely Helium, Oxygen and Iron nuclei. The cosmic ray induced ionization is obtained on the basis of CORSIKA 6.52 code simulations using FLUKA 2006 and QGSJET II hadronic interaction models. The energy of the primary particles is normalized to GeV per nucleon. In addition, the ionization yield function Y is normalized as ion pair production per nucleon. The obtained ionization yield functions Y for various primaries are compared. The presented results and their application are discussed.